Dräger PointGard 2100
Detector for toxic gases and oxygen
The Dräger PointGard 2100 series is a self-contained gas detection system for the continuous area monitoring of toxic gases in ambient air. PointGard 2100's rugged, water-resistant housing comes complete with a horn ? and strobes ?, a built-in power supply ⚡, and reliable DrägerSensor®.
Benefits
Ready to use out of the box
PointGard is a self-contained gas detection alarm system that is easy to install and commission. Just mount it on a wall and hard wire it to an AC/DC power or plug in the optional AC power cord. Since the strobes and horn are built in, there is no need to specify and purchase separate alarm output devices. The pre-calibrated sensor is ready to use.
Detect over 100 toxic gases using DrägerSensors
Electrochemical DrägerSensors provide continuous detection even under the harshest conditions. Most DrägerSensors offer a very wide temperature range from -40 °C to +65 °C (-40 °F to +149 °F) ?️. The built-in memory contains all the information relating to calibration and configuration. The sensor is pre-calibrated and ready for immediate operation. An intelligent sensor self-test function allows for predictive maintenance.
Flexible communications
PointGard can accommodate additional external alarm devices through its three built-in relays ?️. In addition, a 4-20 mA signal output allows integration into a larger gas detection system.
Rugged and compact housing
PointGard's glass fiber reinforced polyester housing is water and dust resistant with a 4X/IP66 rating ?️. Its compact size allows it easily to fit most applications. Built-in cable glands ? make it easy to install.
Advanced display with diagnostics
The large, illuminated backlit graphic display shows status information clearly and in a format that's easy to use. The measured gas concentration, selected gas type, and measuring unit are displayed during normal operation. Coloured LEDs (green, yellow, and red) ??? provide additional alarm and status information. Advanced diagnostics log events and gas readings, which can be displayed and a graph created on the display.
Monitor remote areas up to 30meter (98ft) away
A remote sensor enclosure with a cable up to 30meter (98ft) long ?, designed for use in ordinary locations, is available for electrochemical sensors.
Accessories
Remote housing for EC toxic gas sensor
The remote housing for the EC sensor head is compatible with the PointGard 2100. It can be ordered with a 5m (16ft), 15m (49ft), 30m (98ft) long cable with plug and includes a bracket wall mount. The housing for the remote sensor is not suitable for use in classified environments containing flammable, combustible or explosive agents.
Related Products
Dräger PointGard 2200
The Dräger PointGard 2200 series is a self-contained gas detection system for the continuous area monitoring of flammable gases and vapours in ambient air. PointGard 2200's rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and reliable DrägerSensor®.
Dräger PointGard 2700
The Dräger PointGard 2700 is a self-contained gas detection system for the continuous area monitoring of flammable hydrocarbon gases and vapors in ambient air. PointGard 2700's rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and external relays. It is compatible with a remotely mounted Dräger PIR 7000 Type 334 or Type 340 infrared gas sensor.
Dräger PointGard 2720
The Dräger PointGard 2720 is a self-contained gas detection system for the continuous area monitoring of carbon dioxide (CO2) in ambient air. PointGard 2720's rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and is compatible with a remotely mounted Dräger PIR 7200 infrared CO2 sensor.
Technical Data
| Parameter | Value |
|---|---|
| Type | Self-contained gas monitor with alarm devices for general-purpose applications |
| Measuring ranges | Toxic gases and oxygen in ambient air; Electrochemical (EC) sensor; Customized depending on sensor |
| LCD display | 75 mm/3" backlit graphic LC display; Selectable red or green illumination, alphanumeric |
| Indicators | 3 status LEDs (green/yellow/red) ??? |
| Operation | Through three front mounted push buttons |
| Security | Separate passwords for maintenance and configuration menu |
| Functions | Event and data logger with a capacity of up to 35,000 records; Warning and error messages displayed in plain text; Passwordless bump-test mode inhibits alarms; Automatic calibration mode for zero and span |
| Signal output analog (Normal operation) | 4-20 mA |
| Signal output analog (Maintenance) | Constant 3.4 mA or 4 mA ±1 mA 1 Hz modulation (adjustable) |
| Signal output analog (Fault) | <1.2 mA |
| Power supply AC version (Operating voltage) | 100-240 VAC 50-60 Hz ⚡ |
| Power supply AC version (Nominal power) | 6 W |
| Power supply AC version (Operating current (max)) | 0.5 A |
| Power supply AC version (Inrush current) | Max. 40 A at 230 VAC 50 Hz |
| Power supply DC version (Operating voltage) | 8-30 VDC |
| Power supply DC version (Nominal power) | 6 W |
| Power supply DC version (Operating current (max)) | 2.5 A |
| Electrical certification | CE rating, IEC/EN 61010-1; Complies with UL 61010-1; Class B device, residential use compliant with ICES-3(B)/NMB-3(B) ✅ |
| Relay specification | 2 alarm relays and 1 fault relay; SPDT contact 5 A @ 230 VAC, 5 A @ 30 VDC, resistance bound ?️ |
| Alarm devices | Alarm reset through front-mounted push button; Variants with amber and red LED strobes activate on 2 alarm levels independently ??; Variants with green steady light activate red strobe on 1 common alarm level. Green steady light turns off during alarm or fault condition; optional blue LED strobe; 85-105 dB adjustable-volume buzzer with continuous and pulsating tone ? |
| Temperature (storage) | -20 to +65 °C/-4 to +149 °F ?️ |
| Temperature (operation) | -20 to +50 °C/-4 to +122 °F ?️ |
| Humidity | 0 to 95% r. h., noncondensing ? |
| Pressure | 20.7 to 38.4" Hg/700 to 1,300 hPa ? |
| Material | Glass fiber reinforced polyester (GFRP) ? |
| Mounting | Wall mount with internal screws or optional SS mounting brackets ? |
| Housing protection type | NEMA 4X, IP66; indoor or outdoor use ?️ |
| Housing certification | UL 508A/50/50E; CSA C22.2 94.1/94.2/14-13 ✅ |
| Cable entry point | 3 cable glands, 1/2" NPT ? |
| Size (L x W x D) | 255 x 280 x 120 mm/10 x 11 x 4.7" ? |
| Weight | 2.5 kg/5.5 lb ⚖️ |
Ordering Information
| Item | Part Number |
|---|---|
| Dräger PointGard 2100 EC AC Power | 83 26 420 |
| Dräger PointGard 2100 EC AC Power w/ green steady light | 83 26 426 |
| Dräger PointGard 2100 EC DC Power | 83 26 423 |
| EC Sensing Head Remote Enclosure w/ mount (requires cable) | 68 12 684 |
| Remote Cable + Plug (5 m/16') | 83 23 305 |
| Remote Cable + Plug (15 m/49') | 83 23 315 |
| Remote Cable + Plug (30m/98') | 83 23 330 |
| Sensor Diagnostics Dongle | 83 17 860 |
| Sensor Test Dongle | 83 17 619 |
| DrägerSensor® AC | 68 10 595 |
| DrägerSensor® Cl₂ | 68 09 665 |
| DrägerSensor® COCl₂ | 68 09 930 |
| DrägerSensor® CO | 68 09 605 |
| DrägerSensor® CO LS | 68 09 620 |
| DrägerSensor® CO LH | 68 12 570 |
| DrägerSensor® H₂ | 68 09 685 |
| DrägerSensor® H₂O₂ HC | 68 09 675 |
| DrägerSensor® H₂O₂ LC | 68 09 705 |
| DrägerSensor® H₂S LC | 68 09 610 |
| DrägerSensor® H₂S HC | 68 09 710 |
| DrägerSensor® H₂S | 68 10 435 |
| DrägerSensor® HCl | 68 09 640 |
| DrägerSensor® HCN | 68 09 650 |
| DrägerSensor® HCN LC | 68 13 200 |
| DrägerSensor® Hydrides | 68 09 635 |
| DrägerSensor® Hydrides SC | 68 09 980 |
| DrägerSensor® PH₃/AsH₃ | 68 09 695 |
| DrägerSensor® Hydrazine | 68 10 180 |
| DrägerSensor® NH₃ LC | 68 09 680 |
| DrägerSensor® NH₃ HC | 68 09 645 |
| DrägerSensor® NH₃ TL | 68 13 095 |
| DrägerSensor® NH₃ FL | 68 13 260 |
| DrägerSensor® NO LC | 68 09 625 |
| DrägerSensor® NO₂ | 68 09 655 |
| DrägerSensor® NO₂ LC | 68 13 205 |
| DrägerSensor® O₃ | 68 14 005 |
| DrägerSensor® O₂ LS | 68 09 630 |
| DrägerSensor® OV1 | 68 10 740 |
| DrägerSensor® OV2 | 68 10 745 |
| DrägerSensor® SO₂ | 68 09 660 |
| Mounting Bracket Set (not included in Dräger PointGard) | 83 26 497 |
| Splash Guard | 68 12 510 |
| Calibration Adapter Viton® | 68 10 536 |
| IR Connection Kit for PC configuration and upgrades ? | 45 44 197 |
| LED status light green w/ interface cable | 83 26 489 |
| LED strobe light, blue ? | 83 26 472 |
| AC Power Cable USA ⚡ | 83 26 451 |
Notes
Not all products, features, or services are for sale in all countries. Mentioned Trademarks ™️ are only registered in certain countries and not necessarily in the country in which this material is released. Go to www.draeger.com/trademarks to find the current status.
Corporate Headquarters
Drägerwerk AG & Co. KGaA
Moislinger Allee 53-55
23558 Lübeck, Germany
USA
Draeger, Inc.
7256 S. Sam Houston Parkway W., Suite 100
Houston, TX 77085
1 800 4DRAGER (1 800 437 2437)
CANADA
Draeger Safety Canada, Ltd.
2425 Skymark Ave., Unit 1
Mississauga, Ontario L4W 4Y6
1 877 DRAGER1 (1 877 372 4371)
Locate your Regional Sales Representative at: www.draeger.com/contact ?
