Altec Lansing Mini Lifejacket 2

Package Contents

Ensure the following items are included in your package:

• Speaker
• USB Cable
• AUX Cable
• AC Adapter
• Mount

Speaker Overview

Familiarize yourself with the buttons on your speaker:

• ① Power
• ② Volume -
• ③ Volume +
• ④ LED Light Indicator
• ⑤ Charging Port
• ⑥ AUX IN Port
• ⑦ Wrench

Bottom View: Features a 1/4" attachment point for tripods or suction cup mounts (sold separately).

Charging

To charge the speaker's internal battery:

1. Connect one end of the included USB cable to the speaker's charging port (⑤).
2. Connect the other end to a USB port or AC charging adapter.

The LED indicator (④) turns red while charging and turns off when fully charged. Charging may take up to 3 hours.

Pairing Your Speaker With a Bluetooth Phone

1. Press and hold the Power button (①) for approximately 5 seconds. The speaker will announce "pairing mode" once powered on.
2. On your Bluetooth device, go to the Bluetooth Manager, search for Bluetooth devices, and select "MiniLifeJacket2" to connect.
3. If prompted, enter the PIN code "0000" and confirm.

Once paired, the speaker will audibly state: "You are now paired, enjoy."

Listening to Music on Your Speaker

• Play/Pause: Press the Power button (①) to play or pause music from your audio source.
• Next/Previous Song: Press and hold the Volume + (③) or Volume - (②) buttons for 2 seconds to advance to the next song or go back to the previous one.
• Increase/Decrease Volume: Press and hold the Volume + (③) or Volume - (②) buttons to adjust the volume.

Wired External Audio Input

Connect audio devices using the included 3.5mm Auxiliary Cable to the AUX IN port (⑥) on your speaker.

Activating Siri (iOS Devices)

If your speaker is paired with an iOS device capable of running Siri:

• Press the power button (①) three times to activate Siri.

Warranty Information

Altec Lansing One Year Warranty Card

This warranty covers the original consumer purchaser and is non-transferable. It covers products that fail to function properly under normal usage due to defects in material or workmanship. The product will be repaired or replaced at no charge for parts or labor for one year.

What Is Not Covered by Warranty: Damages or malfunctions not resulting from defects in material or workmanship, including those from unauthorized repairs, tampering, modification, or accidents.

To Obtain Warranty Service and Troubleshooting:

• Call 1-855-292-4087
• Visit www.alteclansing.com

For warranty service, contact Altec Lansing for problem determination and service procedures. Proof of purchase (bill of sale or receipted invoice) within the warranty period is required. Package and send defective products with a dated proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include other items or accessories.

Limitation of Warranties: No other express or implied warranties, including warranties of merchantability or fitness for a particular purpose, apply beyond the express warranty period. Altec Lansing is not liable for incidental, direct, indirect, special, punitive, or consequential damages.

Legal Rights: This warranty provides specific legal rights, which may vary by state or province.

This product is manufactured, distributed, and sold by SAKAR International, Inc. All other trademarks are the property of their respective owners.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

If interference occurs, try to correct it by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consulting the dealer or an experienced radio/TV technician.

Compliance Marks:

[BC] [FC]

Technical Support

For technical support, visit www.alteclansing.com for manuals, software, and FAQs. For phone support, call 1-855-292-4087.