Paulmann Plug & Shine Twilight Sensor (Art.-Nr. 945.87)
Installation and operational guide for the Paulmann Plug & Shine outdoor lighting system.
Product Information
Brand: Paulmann
Article Number: 945.87
Product Series: Plug & Shine
IP Rating: IP67 (Dust and water protected)
Info: ? Visit www.paulmann.com for more information.
Manufacturer: Paulmann Licht GmbH, Quezinger Feld 2, 31832 Springe, Germany
Package Contents
- 1x Twilight Sensor unit
- Screws (included)
Note: Driver and connector cable are not included. Recommended accessories: Driver (Art.-Nr. 988.48), Connector Cable (Art.-Nr. 939.23).
Installation and Usage
Mounting Requirements
Ensure the mounting surface has a minimum diameter of 80mm. Diameters less than 80mm are not suitable. ✔️ min. Ø80mm, ❌ < Ø80mm.
Connections
Follow the connection diagrams for proper setup. Ensure correct polarity and secure connections. ✔️ Valid connection, ❌ Invalid connection.
Cable Length
The maximum permissible cable length for the system is 50 meters.
Fixture Mounting
Mount the light fixture securely using the provided screws. Tools such as a drill and screwdriver may be required.
Placement
Position the light fixture in the desired outdoor location, for example, inserted into the ground.
Sensor Operation
The integrated twilight sensor automatically controls the lighting:
- When light levels are above 30 lux (daytime/bright conditions), the lights are OFF. ☀️ ! > 30lx OFF
- When light levels drop below 30 lux (nighttime/dark conditions), the lights turn ON. ? ! < 30lx ON
Disposal Information
This product is subject to the WEEE directive. Old electrical equipment must not be disposed of with household waste. It can be returned to public collection points. Batteries and lamps must be separated from the appliance before disposal. Retailers are obliged to take back this product free of charge. End-users are responsible for deleting personal data from old appliances.
