YY-2953 Basic Operations

Charging

1. Set the headset into the charging case.
2. Connect the charging case to an AC outlet.

Use the supplied USB Type-C cable and a commercially available USB AC adaptor. The indicator (orange) on the charging case lights up, and charging starts on the headset and the charging case. When charging is complete, the indicator (orange) turns off automatically. Remove the USB Type-C cable.

Wearing the headset

1. Hold the headset with your fingers.
2. Extend your earlobe down with one hand and place the headset into your ear.

Description of diagrams: The first diagram shows a hand holding the small earbud. The second diagram illustrates pulling down the earlobe with one hand and inserting the earbud into the ear.

Pairing and Connecting to Bluetooth Devices

1. Place the headset into the charging case.
2. Open the charging case cover and press and hold the Pairing button on the cover for 7 seconds.
3. Remove the headset from the case and wear it.
4. On your Android smartphone or iPhone, turn on the Bluetooth function.
5. On your device, select "[YY2953]" from the list of available Bluetooth devices.

You will hear the voice guidance, "Bluetooth connected", from both headset units.

Listening to Music via Bluetooth

1. Wear the headset.
2. Operate the touch sensor on the headset.

Making and Receiving Phone Calls

1. Ensure the headset is connected to your smartphone or mobile phone via Bluetooth.
2. To answer an incoming call: When you hear a ring tone, tap the touch sensor on either the left or right headset unit twice (with an interval of approximately 0.3 seconds).
3. To end a call: During a call, tap the touch sensor on either the left or right headset unit twice (with an interval of approximately 0.3 seconds).
4. To reject an incoming call: When you hear a ring tone, tap the touch sensor on either the left or right headset unit three times.

Using the Voice Assist Function

1. Wear the headset units and ensure they are connected to your smartphone via Bluetooth.
2. To activate the voice assistant: Tap the touch sensor on either the left or right headset unit twice.
3. To cancel the voice assistant function: Tap the touch sensor on either the left or right headset unit three times.