OWS-JM13 True Wireless Bluetooth Headset User Manual

Product Parameters

Packing List

• Earphones ×2
• Charging Case ×1
• Type-C Charging Cable ×1
• Instruction Manual ×1
• Silicone Lanyard ×1

Operating Instructions

Telephone Mode

• Incoming call: Click to answer, then click to hang up.
• Reject call: Long press 2s.

Music Mode

• Double touch (Left): Play the previous song.
• Double touch (Right): Play the next song.
• Single touch: Play/Pause.

Binaural Mode

• Three touch (Left): Volume down.
• Three touch (Right): Volume up.
• Power on: Long press 3s.
• Power off: Long press 5s.

Precautions

Prompt

1. Before using the product, please read this user manual carefully and keep it properly.
2. For first use, please fully charge this product.
3. If the product is not used for a long time (over 1 month), please charge it.
4. If the phone is unable to search for Bluetooth headphones, please confirm if the Bluetooth headphones are in the 'Pairing' status. If pairing or connection is not carried out for a long time, Bluetooth earphones, the pairing function will be turned off. Please turn on the Bluetooth earphones again to 'pairing status'. If there is an error in the phone program, please restart the phone; if there is an error in the Bluetooth earphone program, please restart the Bluetooth headphones.

Warning

1. Do not remove or repair or modify headphones for any reason, otherwise it may cause damage, causing fire, electronic component breakdown, or even complete damage to this product.
2. Do not place the device at temperatures that are too low or too high (below 0 °C or above 45 °C) environment.
3. Please avoid using device indicator lights near the eyes of children or animals.
4. Do not use this device in thunderstorm weather, as thunderstorms can cause the device to work abnormally and increase the risk of electric shock.
5. Do not use oil or other volatile liquids to wipe this product.
6. Do not wet the device when it comes into contact with liquid.

Warranty Description

Dear customer, thank you for your patronage of our company's products. In order to ensure your interests, please purchase this product. After purchasing, carefully read the manual and the following information:

Not covered by warranty (the company can provide paid services):

1. Failure to operate, use, and store according to the user manual resulted in the malfunction of this product, obstacles, and damages.
2. Unauthorized graffiti, tearing off product packaging and barcodes.
3. Unauthorized modification of factory settings and disassembly for repair.
4. Accidental factors or human-caused product damage, such as unqualified input voltage, high temperature, water ingress, damage, severe oxidation or rusting of the product, etc.
5. Caused by force majeure, such as earthquakes, fires, floods, lightning strikes, etc., faults and damages.

FCC Requirement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.