PRODUCT INSTRUCTION MANUAL

Product parameters:

• Wireless Technology: Version 5.4
• Battery (Earbuds): 50mAh, 3.7V
• Battery (Charging Case): 400mAh, 3.7V
• Input Power Supply: 5V - 0.4A
• Charging Case Time: approx. 2hrs
• Music Playback Time: approx. 7hrs
• Charging Case port: Type-C

Key function operation

• Power on: Open the charging box, remove the headphones, and automatically turn on
• Power off: Place the headphones in the charging box and close the cover
• Pairing mode: The headphones automatically enter pairing mode when turned on
• Pause/Play: Click on the left or right ear
• Answer call: Click on left or right ear
• Hang up call: Double click on left or right ear
• Next song: Three strikes on the right ear
• Previous song: Three strikes on the left ear
• Volume decrease: double-click on the left ear
• Volume increase: double-click on the right ear
• Voice assistant: Long press left and right ears for 2 seconds
• Call rejection: Long press left and right ears for 2 seconds

Product functions/Features

• Wireless stereo: support connecting Wireless devices to play music
• Wireless call: support Wireless connection high-definition call
• Power indicator: support iOS system headset power indicator
• Comfortable wearing: The ear hanging wearing method is more comfortable without entering the ear
• Air conduction: Conducting sound into the ear through external exposure

Wireless connection operation

• Please keep the Wireless headset and mobile phone (or other connected device) within 1 meter, the closer the better.
• Turn on the charging box, the headset will automatically turn on and enter the pairing mode.
• Turn on the user's mobile phone (or other Wireless device), Wireless function, and search or scan. At this time, the mobile phone will search for all nearby Wireless devices, click the connection corresponding Wireless model name, after successfully pairing and connecting, you can start the headset call, Listen to songs and so on.

LED lights

• The orange light for charging the charging compartment flashes, and the orange light remains on when the charging compartment is fully charged.
• Charge the headphones, the green light remains on, the headphones are fully charged, and the green light goes off.
• When the battery level of the charging compartment is below 5%, the green light flashes.

Warnings and precautions when using the product

• Never use abrasive cleaners to clean this product.
• Do not allow this product to heat up or close to fire sources, such as cooking stoves.
• Do not expose this product to direct sunlight for a long time.
• Do not dispose of this product in fire to avoid explosion.
• Do not try to disassemble this product to make any modifications, as it does not contain any repair components.
• Do not use this product in the rain.
• If you do not plan to use this product for a long period of time, please store it in a dry environment and charge the headset at least once a month to extend its life and avoid extreme temperatures and dust.

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

The device must not be co-located or operating in conjunction with any other antenna or transmitter.