OWS-31 True Wireless Bluetooth Earphones

Product Overview

OWS True Wireless Bluetooth Earphones

Usage Instructions

Please read all instructions carefully and retain for future use.

Safety Precautions

• Do not attempt to disassemble the unit and change any part, except where operation methods are specifically indicated in the manual.
• Do not expose the unit to liquid, moisture, or humidity, as it is not a waterproof product.
• If any liquid accidentally enters the unit, disconnect immediately and move the product away.
• To avoid electric shock, ensure hands are dry when assembling or disassembling the product.
• Do not place the unit near heat sources or expose it directly to fire, as this may result in an explosion.
• Do not place the unit in an environment with strong electromagnetic force, as this may cause product malfunction.

Packing List

• Earphones X 2
• Charging Case X 1
• Manual X 1
• Type-C Charging Cable X 1
• Sling X 1

Product Schematic Description

Earphones

• Functional Touch Area
• Indicator Light
• 'R' and 'L' markings

Charging Case

• Type-C Charging Port
• Indicator Light

Product Specifications

Charging Case Specifications

(All technical information is subject to actual performance)

Charging the Charging Case

Connect the Type-C cable to a 5V power adapter and the charging port of the charging case.

(Tip: When the charging case indicator light flashes green, please charge the charging case promptly.)

LED Indicator Status

Charging Case Indicator

• Charging the charging bay: Green light on.
• Charging bay is fully charged: Indicator is off.
• Charging case low charge: Green light flashing.

Earphones Indicator

• Power on: Blinking white and green lights alternately.
• Power off: White light flashes 3 times.
• Bluetooth pairing status: White and green lights flash alternately.
• Earphones are successfully paired: Indicator is off.

Product Operating Instructions

1. Power On

• Method 1: Remove the earphones from the charging case; they will automatically power on.
• Method 2: When earphones are off, press and hold the functional touch area for 3 seconds to power on.

2. Power Off

• Method 1: Place the earphones back into the charging case; they will automatically power off.
• Method 2: Press and hold the functional touch area for 5 seconds to power off.

3. Pairing

• Step 1: Remove earphones from the charging case. They will automatically power on and initiate pairing mode.
• Step 2: On your smart device, open the Bluetooth list, search for "OWS-31", and connect. (Supports single-ear use).

Touch Control Button Operations

Music Playback Mode

• Previous Song: Double-click the functional touch area on the left earphone (L).
• Next Song: Double-click the functional touch area on the right earphone (R).
• Volume Up: Triple-click the functional touch area on the right earphone (R).
• Volume Down: Triple-click the functional touch area on the left earphone (L).
• Pause/Play: Single-click the functional touch area on either earphone.

Hands-Free Call Mode

• Answer Incoming Call: Single-click the functional touch area on either earphone.
• Reject Incoming Call: Press and hold the functional touch area on either earphone for 2 seconds.
• Hang Up Call: Single-click the functional touch area on either earphone during an active call.

Activate Voice Assistant

• Activation: Press and hold the functional touch area on either earphone for 1.5 seconds (unless in an active call). (Requires smart device to support voice assistant.)

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction.