Insignia Rugged Speaker System
Model: NS-HMPS3018
This document provides a quick setup guide for the Insignia NS-HMPS3018 Rugged Speaker System.
Package Contents
- Rugged speaker system
- AC power cord
- Quick Setup Guide
Features
- Bluetooth playback
- Line input
- Built-in FM tuner
- Built-in rechargeable battery
- USB slot
- Microphone function
Finding Your User Guide Online
To access the full user guide, visit www.insigniaproducts.com. Enter your model number (NS-HMPS3018) in the search box, press ENTER, then navigate to Support & Downloads. Click on the desired language for the User Guide.
Please read these instructions before using your new product to prevent any damage.
System Overview and Controls
Top Panel Layout
The top panel of the speaker system features several controls and ports:
- LINE IN: Audio input socket for connecting external audio sources.
- MIC socket: Microphone input socket.
- Microphone volume knob: Adjusts the volume for the microphone input.
- Play/pause button: Press to temporarily pause playback; press again to resume.
- Power on/off/battery level button: Press and hold to turn the unit on or off. Press briefly to display the current battery charge level.
- Previous button: Press to skip to the previous track or preset station. Press and hold to fast-rewind.
- Source button: Press repeatedly to cycle through available input sources (Bluetooth, LINE, USB, TUNER).
- Next button: Press to skip to the next track or preset station. Press and hold to fast-forward.
- Master volume knob: Adjusts the overall speaker volume.
- Display screen: Shows information such as battery charge level and selected source.
- Handle: For carrying the speaker.
Side Panel
The side panel contains the power input:
- AC power input socket: Connects the included AC power cord for charging.
Charging Your Speaker System
Connect the included AC power cord to the speaker system and an AC power outlet. Turn the speaker system off before charging. To check the charging status, turn the unit on by pressing and holding the power button, then press the power button again to view the battery charge level. Charging indicator circles on the display screen will blink rapidly during charging. The battery is fully charged when all four indicator circles are illuminated.
Checking the Battery Life
When the speaker system is turned on and not charging, press the battery level button to display the current battery charge level on the screen. The status is indicated by the number of illuminated circles:
| Charge Level | Status |
|---|---|
| 100% | 4 circles light up |
| 75% | 3 circles light up |
| 50% | 2 circles light up |
| 25% | 1 circle lights up |
Using a Microphone with This Speaker System
This speaker system is designed for a 3.5 mm, 2-pin microphone (not provided). If you have a 6.5 mm, 2-pin microphone, you will need a 3.5 mm to 6.5 mm converter (sold separately) to use it with this speaker system. 3-pin microphones are not compatible.
- Compatible: 2-pin microphone [✔️]
- Compatible with converter: 6.5 mm, 2-pin microphone [✔️]
- Incompatible: 3-pin omni-directional XLR microphone [❌]
- Incompatible: 3-pin microphone plug [❌]
Using Your Speaker System
Connecting an Audio Device (Line In)
Connect an external audio source (e.g., VCD, CD, VCR, MP3 player) to the Line In jack on the top panel using an audio cable (not provided). Press the SOURCE button until "LINE" mode is selected on the display.
Pairing Your Speaker System with a Bluetooth Device
Your speaker system can store pairing information for up to eight Bluetooth devices. Ensure your Bluetooth device supports Bluetooth Ver.4.0+EDR and is not currently paired with another device. Consult your device's documentation for compatibility details.
- Ensure your Bluetooth device is within 30 feet (approx. 9 meters) of the speaker system.
- Turn on your speaker system.
- Press the SOURCE button repeatedly until "BT" mode is selected to enter pairing mode.
- Turn on your Bluetooth device, enable Bluetooth, and set it to pairing mode. Refer to your device's manual for instructions.
- On your Bluetooth device, select "NS-HMPS3018" from the list of available devices. The speaker system will pair with your device.
- Press PLAY/PAUSE to begin playback. Volume controls on the speaker system will also be active.
Note: The Bluetooth device should automatically reconnect to the speaker system when both are powered on.
Basic Playback Controls
| Button | Description |
|---|---|
| POWER ON/OFF | Press and hold to turn the unit on or off. |
| BATTERY LEVEL | Press to check the current battery capacity when the speaker system is on. |
| SOURCE | Press repeatedly to select a signal source (Bluetooth, LINE, USB, TUNER). |
| PLAY/PAUSE | Press to temporarily pause playback. Press again to resume. Hold down to disconnect Bluetooth. |
| Next | Press to skip to the next track. Press and hold to fast-forward. |
| Previous | Press to return to the previous track. Press and hold to fast-rewind. |
| MICROPHONE VOLUME KNOB | Use to adjust the volume of the microphone input. |
| MASTER VOLUME KNOB | Use to adjust the speaker volume. |
USB Drive Playback
Insert a USB thumb drive into the USB slot. Press the SOURCE button repeatedly to select "USB" mode.
Microphone Playback
Connect an external microphone to the Microphone jack on the top panel. Use the Microphone Volume knob to adjust the sound level.
Tuner Operation
Press the SOURCE button repeatedly to select "TUNER" mode. The following buttons are used in tuner mode:
| Button | Description |
|---|---|
| PLAY/PAUSE | Press and hold to auto scan for radio channels. Press again to stop scanning. |
| Next | Press to skip to the next preset station. Press to fine tune (increase) frequency manually. |
| Previous | Press to skip to the previous preset station. Press to fine tune (decrease) frequency manually. |
Specifications
| Parameter | Value |
|---|---|
| Power supply | AC ~100-240V / 50/60Hz |
| Power consumption | 30W |
| Operating Temperature | 14 ~ 95°F (-10 ~ 35°C) |
| Relative humidity | 5% ~ 90% |
| Amplifier output (Max) | 30W |
| FM tuner band range | 87.5MHz - 107.9MHz |
| Frequency response | ±3dB (20Hz ~ 20kHz) |
Troubleshooting
- No power: Ensure the AC power cable is securely connected.
- No sound or sound is distorted: Turn up the volume on both the speaker and the connected device.
- Buttons on the speaker do not work: Turn off and unplug the speaker system. Reconnect the power cord and turn it on again.
Safety Information
- Read this guide before making connections and operating the speaker system. Retain for future reference.
- Do not open the unit case; there are no user-serviceable parts inside. Refer servicing to qualified personnel only.
- Turn off the speaker system when not in use. Disconnect from AC power supply if not used for an extended period.
- Do not install near heating sources or direct sunshine.
- Do not install in places exposed to moisture or rain.
- Install on a horizontal, flat, and firm surface with good ventilation. Never block vents to prevent overheating.
- Clean the exterior with a soft, clean rag. Do not use chemicals or detergents.
- Only use attachments/accessories specified by the manufacturer.
Legal Notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warranty and Contact Information
One-Year Limited Warranty
Visit www.insigniaproducts.com for warranty details.
Contact Insignia
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico).
Website: www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved. Made in China.
Document Version: V1 ENGLISH 17-0058
