WiFi Thermostat 563 User Manual

Introduction

This document provides instructions for the tekmar WiFi Thermostat 563. It covers setup, operation, and integration with the Watts Home mobile application.

Image Description: The cover page displays the title "User Manual WiFi Thermostat 563" alongside the tekmar logo. An image shows a modern kitchen with a thermostat display on the left, featuring the tekmar brand, current time (10:30 AM), outdoor temperature (60°), floor temperature (70°), and icons for app downloads. The bottom features the tekmar logo and "A WATTS Brand".

Home Screen

After 60 seconds of inactivity, the thermostat's home screen displays only the current time and temperature.

Navigation: Swipe to view:

• Weather information
• Outdoor temperature
• Floor temperature
• Heat To setting
• Cool To setting
• Relative Humidity

The thermostat also indicates Humidifier or Dehumidifier operation.

Changing Operating Mode: The mode can be changed via the 'Mode' interface, with options including Emergency Heat, Heat, Cool, Auto Heat-Cool, and Off.

Temperature Adjustment: Touch the up (▲) or down (▼) arrows to adjust temperatures. Users can select either 'Heat To' or 'Cool To' settings.

Hold Function: The 'Hold Until [Time]' option overrides the programmed schedule until the specified time. 'Save to Schedule' applies the new temperature to the current schedule event.

Image Description: A diagram illustrates the thermostat's home screen, showing the current time (10:30 AM), outdoor temperature (60°), floor temperature (70°), and equipment status (Heat On). It also shows the 'Go to settings' menu with options like AWAY, SCHEDULE, DISPLAY, TIME, WIFI, SETUP, and FAN. A 'WIFI: Connected' status is indicated.

User Settings

Away Setting

The 'Away' setting conserves energy when the building is unoccupied. It can operate normally or use a pre-selected Away temperature from the Setup menu.

Note: Activating the 'Away' setting on the thermostat or mobile app affects all linked devices in that location. The Away temperature is adjustable in the Setup / Temps menu.

Image Description: A visual shows a 'Home / Away' toggle, with 'At Home' and 'Away' options. A 'Save' button and an 'Info' icon are also visible.

Schedule Settings

Users can configure heating and cooling schedules for different periods of the day, typically categorized as Wake, Leave, Return, and Sleep.

• Wake: Sets the initial comfort level for the day.
• Leave: Sets a more energy-efficient temperature when the building is empty.
• Return: Sets the comfort level for when occupants are expected to return.
• Sleep: Sets a comfortable temperature for sleeping.

Early Start: This feature anticipates the time required to reach the desired temperature and begins heating or cooling in advance.

Schedule Control: The 'Schedule On' option ensures the thermostat follows the programmed schedule. Setting it to 'Off' maintains a constant temperature throughout the day.

Creating a New Schedule: Users can create custom schedules.

Image Description: Diagrams show the schedule interface with days (Mon-Fri) and time periods (Wake, Leave, Return, Sleep) with associated heating and cooling temperatures. Another diagram illustrates setting the schedule start time, heating temperature (e.g., Heat to 70°), and cooling temperature (e.g., Cool to 75°). A 'Skip' option is available for temperature changes.

Display Settings

The thermostat offers various display customization options:

• Temperature Units: Select between Fahrenheit (°F) or Celsius (°C).
• Energy Use: View monthly energy consumption data.
• Brightness: Adjust brightness for active display (e.g., 80%) and inactive display (e.g., 50%). Brightness adjusts after a 60-second timeout.
• Theme: Choose between Light and Dark themes.
• Language: Select display language (English, French, or Spanish).

Display Options:

• Clean Screen: Set a 10-second countdown to allow the screen to be cleaned with a moist cloth.
• Inactive Time Display: Choose whether to show the time when the screen is inactive.
• Inactive Humidity Display: Choose whether to show relative humidity when inactive.
• Inactive Outdoor Display: Choose whether to show the outdoor temperature when inactive.

Energy Use View: The 'Energy Use' section provides a daily or monthly view of the run time for both heating and cooling cycles.

Image Description: Diagrams show the 'DISPLAY 1/2' and 'DISPLAY OPTIONS 2/2' interfaces with various settings. An 'Energy Use' section displays daily usage data in a table format.

Time Settings

When connected to the Internet, the thermostat can automatically set the correct time and date. This is recommended to ensure proper communication with the mobile app.

Manual Time Setting: The time and date can be manually set by highlighting a field and using the up (▲) or down (▼) buttons.

NOTICE: Incorrect manual time and date settings may prevent the thermostat from communicating with the mobile app.

Time Options:

• 12-hour or 24-hour time format
• Automatic or manual time setting
• Time zone selection
• Daylight savings time adjustment

Image Description: A 'TIME & DATE' interface is shown, allowing manual input for date and time, with 'OPTIONS' and an info icon.

Fan Settings

The fan operates normally in 'Auto' mode, turning on only when needed for heating or cooling equipment. In programmable schedules, a specific fan setting can be applied for each time period.

Fan Modes:

• On: Fan runs continuously.
• Auto: Fan runs as needed with heating/cooling.
• Follow Schedule: Fan operation follows the programmed schedule.

Image Description: Diagrams show the 'Fan' interface with 'On', 'Auto', and 'Follow Schedule' options, and a 'Setup Fan Schedule' button.

Setup Menu

The Setup menu provides access to seven sub-menus that configure the thermostat's operation:

• TOOLBOX: For installer settings.
• TEMP: Setup room and floor minimum and maximum temperatures.
• SENSORS: Setup temperature and humidity high/low alert notifications.
• ALERTS: (Details not specified in this section)
• RELAYS: (Details not specified in this section)
• HUMIDITY: Set humidifier and dehumidifier settings.
• VENT: Set the ventilator run time.

Users can press 'back' to return to the main Settings menu.

Image Description: A diagram shows the 'SETUP MENU' with buttons for TOOLBOX, TEMP, SENSORS, ALERTS, RELAYS, HUMIDITY, and VENT, indicating the function of some settings.

Humidity and Ventilation Setup

Humidity Setup

Lowest Relative Humidity: Set the 'Humidify To' level (e.g., 40%), with a range of 10% to 80%. Default is 40%. This feature is available when Accessory 1 or 2 operates a humidifier.

Highest Relative Humidity: Set the 'Dehumidify To' level (e.g., 60%), with a range of 20% to 90%. Default is 60%. This feature is available when Accessory 1 or 2 operates a dehumidifier.

Image Description: A diagram shows the 'Humidity' interface with settings for 'Humidify To' and 'Dehumidify To'.

Ventilation Setup (HRV / ERV)

Users can configure ventilation settings for different time periods (Wake, Leave, Return, Sleep) within a programmable schedule. The ventilation fan runs for a specified amount of time per hour (e.g., 30 min/hr, 45 min/hr).

Image Description: Diagrams show 'VENTILATION FAN' and 'VENTILATION Wake' interfaces, allowing users to set ventilation times per hour.

WiFi Setup

NOTICE: To use the WiFi features, users must accept the Terms of Use available at https://www.watts.com/terms-of-use. The product can still be used without WiFi features if terms are not accepted.

The thermostat includes a step-by-step tutorial for WiFi connection setup:

1. Step 1: Agree to Terms of Use: Press 'AGREE' to accept the terms.
2. Step 2: Turn on WiFi: Select 'On' for WiFi.
3. Step 3: Network SSID: Select your wireless network name from the list. The network must support WPA2 security encryption.
4. Step 4: Enter WiFi Password: Use the on-screen keyboard to enter the WiFi password.
5. Step 5: ZIP/Postal Code: Enter your ZIP or postal code to determine your location for weather information.
6. Step 6: Time Source: Select whether the time is set automatically from the Internet or manually.

Image Description: A series of diagrams illustrate the WiFi setup process, showing the Terms of Use agreement, WiFi toggle, Network SSID selection, password entry keyboard, ZIP/Postal code input, and Time Source selection.

Watts® Home App Integration

To view and adjust the WiFi Thermostat using a mobile phone or tablet, download the Watts Home mobile app from the Apple® iTunes® Store or the Google Play® Store.

Add Thermostat to App

1. Step 1: Create Account: Create a new account and log in using your username and password.
2. Step 2: Register Device: On the thermostat, navigate to the WiFi menu and press 'Register Device'.
3. Step 3: Edit Location: In the app, swipe left (Apple) or long-hold (Android) to edit the Location name.
4. Step 4: Add New Device: Press the Location name and select 'Add New Device'.
5. Step 5: Enter Code and Name: Enter the 8-digit registration code displayed on the thermostat into the mobile app. Then, enter the thermostat's room name.

After these steps, the thermostat will be listed on the Devices page in the app.

Image Description: A sequence of screenshots shows the process of adding a thermostat to the Watts Home app, including account creation, thermostat registration, editing location, adding a new device, and entering the registration code.

Using the App

The app provides access to various functions:

• Settings: Access app settings, manage devices, users, account, help, and privacy.
• Locations: Add, edit, or remove locations. Toggle 'Away' mode to save energy when away.
• Devices: View and manage connected devices.
• Thermostat View: Displays current indoor temperature, allows adjustment of heat-to/cool-to settings, shows temperature limits, and lets you select the operating mode (Off, Heat, Cool, Auto).

Additional app functions include editing schedules, viewing energy usage, refreshing data, and accessing thermostat settings.

Image Description: Screenshots illustrate the app's interface for Settings, Locations, Devices, and the Thermostat control screen.

Account Management and Settings

Within the app, users can manage their account and notification preferences:

• Settings: Configure notification preferences (Push, Email, Text) and user preferences (Language, Temperature Scale, Measurement Scale).
• My Account: Update user name and email address.
• Invite Users: Grant access to other users for devices at a specific location.

Image Description: Screenshots show the 'Settings' interface for notifications and preferences, the 'My Account' screen for updating user details, and the 'Invite Users' feature.

Support and Contact Information

For assistance, visit the website or contact tekmar:

• Website: tekmarControls.com
• Email: tekmar.customerservice@wattswater.com
• Phone: 1-800-438-3903

Additional Information:

• Model: 563_U - 02/20
• Manufacturer: tekmar Control Systems Ltd.
• Parent Company: WATTS