DUALTRON VICTOR
Personal Mobility
PRODUCT MANUAL
Product Information
Pictures for reference only, subject to our existing products.
Scan the QR code to download the latest user materials and obtain the latest updates and safety instructions. [QR code for app download]
DUALTRON - The dream of electric technology.
Manufactured by MINIMOTORS.
Diagram And Functions
Scooter Diagram
Illustration of the Dualtron Victor scooter showing key components:
- Handlebar cover
- Handlebar bracket
- Handle post (steering tube)
- QR lever
- Locking slide
- Front suspension
- Front fender
- Front motor
- 10inch tube tire
- Charging port
- Front lamp
- Rear fender
- Kick stand
Handlebar Functions
| Name | Function | Operation method |
|---|---|---|
| Warning Light Button (Multiswitch) | Turn on the warning light | Press the Warning Light Button; the left & right signals will keep blinking until pressed again. |
| Motor system selection button (Multiswitch) | Enable SINGLE/DUAL drive mode | Switch modes through pressing the button. |
| Power button | Turn on/off power | 1. Press and hold the Power button to turn on/off the scooter. 2. Press the button to adjust the speed gear. |
| Set button | Settings | 1. Press and hold the Set button to enter/exit ECO mode. 2. Press the button to switch battery voltage/percent indication. |
| Mode button | Mode selection | 1. Press and hold the Mode button to enter/exit the mode setting, and automatically return to the main interface after 30s. 2. Press the Mode button to switch TRIP/RANGE/ODO. |
| Accelerator | Speed up | Pull the throttle to accelerate. |
Specifications
| Item | Parameter |
|---|---|
| Product | Model: Dualtron Victor |
| Battery Capacity: 60V24Ah CN / 60V30Ah (LG or Samsung) | |
| Range: 80km / 100km | |
| Charging Ambient Temperature: 0 to 40°C (Battery temperature exceeds 55°C, BMS start protection program.) | |
| Battery Management System: Over-heating, short circuit, over-current, over-discharge and over-charge protection | |
| Rider | Max. load: 120kg |
| Recommended Age: 16-60 years old | |
| Required Height: 3'11" - 6'6" (120-200 cm) | |
| Display | Type: New EY3 display (DUALTRON APP available) |
| Motor Type: BLDC Hub Motor | |
| Nominal Power: 1200Wx2 | |
| Machine | Net Weight: 33.5kg |
| Max. Slope: Around 43% [23°] | |
| Drive System: Single/ Dual drive | |
| Speed: 25km/h | |
| Length x Width x Height: 1110 x 609 x1247mm | |
| Folded: Length x Width x Height: 1110 x 279 x560mm | |
| Wheelbase: Approx.880mm | |
| Ground Clearance: Approx.155mm | |
| Traversable Terrain: Asphalt/flat pavement; obstacles < 5 cm; gaps < 5 cm | |
| Operating Temperature: -5 to 45°C | |
| Storage Temperature: -20 to 50°C | |
| Brake | Machine Brake: Hydraulic brake |
| Electric Brake: ABS&EBS (Indicating the battery temperature exceeds 55°C, BMS start protection program, ABS/EBS fails.) | |
| Input Voltage: 100-120V/200-240V~ | |
| Charger Max. Output Voltage: 66.4V 1.75A | |
| Tire | Type: 10 inch tube tire |
| Tire Pressure: 50 psi | |
| Material: Rubber | |
| Suspension | Type: F&R suspension cartridge (replaceable) |
| Optional: Softest, Medium soft, Medium, Medium hard, Hardest |
Disclaimer: This is not a legal opinion or legal advice. The information provided herein (including in the App) is for your convenience and information purpose only. It is not intended to cover every piece of law and/or regulation that may be applicable to this product. DUALTRON explicitly hereby disclaims any and all warranty and/or representation, express or implied, related to completeness, accuracy, up-to-date of such information. DUALTRON reserves the right but not obligation to correct, implement and/or update the information. You shall use the information at your own risk. It is your sole responsibility to learn and understand any and all the law and/or regulation, requirements, prohibition, restriction and/or limitation imposed by either law, government authority, court, private party or the others that may apply to your use of this product.
*Theoretical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 25 km/h on average on pavement.
*Typical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 50 km/h on average on pavement. (Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.)
*Max.Speed: tested while riding with a full battery, 75kg load, 25°C, straight road on flat road with no wind. (Some environmental factors can affect max speed, uneven roads, crooked roads, temperature, wind, etc.)
Packing List
Accessories included with the Dualtron Victor:
- Battery charger x1
- Manual
- Screw Cap x 2
- Multitool x 1
- Folding Bracket
- screw x 2
Bluetooth Connection & APP Download Guide
APP Download Guide
Method 1
1. Scan the QR code to download the APP. [QR code for app download]
2. Choose the mobile phone system that suits you to install, and register / log in.
Method 2
1. Search "DUALTRON" in the application and download it, and register / log in.
Available on: [App Store logo] [Google Play logo]
Pair the Bluetooth on the APP
Steps to pair your scooter with the Dualtron app:
- Power on the scooter.
- Click "Search vehicle" and pair with your scooter. The scooter is connected to the Dualtron app when the Bluetooth symbol lights up. [Bluetooth symbol]
- Select "bind as owner". (No one else can connect; only people authorized by you are allowed to connect. Authorizations are created on the app.)
Assembly
Instructions for assembling the Dualtron Victor:
- Release the QR lever, raise the locking slide upwards, raise the steering tube, then lower the locking slide downward. Tighten the finishing screw properly to lock the QR lever so that the locking slide is firmly fixed in any direction, and check for looseness during use.
- Loosen the QR lever, pull the locking slide inward and raise the handlebar, then close the QR lever and tighten the set screw. Place the locking slide up to the safety line and lock it so that it is firmly fixed with the QR lever. Always check for looseness during use.
How to Ride
Guide to operating the Dualtron Victor:
- Power on the scooter and choose the speed mode. Please choose the speed mode before riding! Note: Speed mode can be chosen via the Dualtron app.
- Stand on the footboard with one foot and push off with the other foot to start gliding. Make sure you have disabled SAFE mode. (SAFE mode setting via Dualtron app. Deactivate safe mode by squeezing brake lever.)
- Put both feet on the footboard and stand stably. Pull the throttle to speed up.
- Slow down by releasing the throttle and squeezing brake levers.
- To turn, shift your body and turn the handlebar slightly. Please watch out for road conditions; sufficient turning space is required.
When hard braking, serious danger or injury may occur. Maintain a moderate speed and look out for potential hazards.
Folding
Instructions for folding the Dualtron Victor:
- Loosen the QR lever, push the locking slider inward and fold the handlebars down.
- Loosen the QR lever and move the locking slide upward. You must hold the steering tube with your hand to prevent falling down and hitting.
- Lay the steering tube down while raising the locking slide.
- Lock the handlebar hook to the footrest. Ensure that the handlebar is locked when lifting the scooter.
