Dualtron Spider II Personal Mobility Product Manual

Diagram and Functions

The Dualtron Spider II features an accelerator, handle stem, handle post (steering tube), QR lever, locking slide, front fender, front suspension, front motor, F&R 10inch tube tire, front lamp, LED lamp button, charging port, rubber deck, controller, folding hook, kick stand, and turn signal.

Handlebar Functions

Specifications

Product

Display

Motor

Machine

Brake

Charger

Tire

Suspension

*Disclaimer: This is not a legal opinion or legal advice. The information provided herein (including in the App) is for your convenience and information purpose only. It is not intended to cover every piece of law and/or regulation that may be applicable to this product. DUALTRON explicitly hereby disclaims any and all warranty and/or representation, express or implied, related to completeness, accuracy, up-to-date of such information. DUALTRON reserves the right but not obligation to correct, implement and/or update the information. You shall use the information at your own risk. It is your sole responsibility to learn and understand any and all the law and/or regulation, requirements, prohibition, restriction and/or limitation imposed by either law, government authority, court, private party or the others that may apply to your use of this product.
*Theoretical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 25 km/h on average on pavement.
*Typical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 50 km/h on average on pavement. (Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.)
*Max.Speed: tested while riding with a full battery, 75kg load, 25°C, straight road on flat road with no wind. (Some environmental factors can affect max speed, uneven roads, crooked roads, temperature, wind, etc.)

Packing List

Accessories included with the Dualtron Spider II:

• Battery charger x1
• Manual
• Screw Cap x 2
• Multitool x 1

Bluetooth Connection

APP Download Guide

Method 1

1. Scan the QR code to download the APP.
2. Choose the mobile phone system that suits you to install, and register / log in.

Method 2

1. Search "DUALTRON" in the application and download it, and register / log in.

Pair the Bluetooth on the APP

1. Power on the scooter.
2. Click "Search vehicle" and pair with your scooter. The scooter is connected to the Dualtron app when the Bluetooth symbol lights up.
3. Select "bind as owner". (No one else can connect, only people authorized by you are allowed to connect. Authorizations are created on the app.)

Assembly

Step 1: Release the QR lever and move the locking slide upwards. You must hold the steering tube with your hand to prevent falling down and hitting.
Step 2: Lay the steering tube down while raising the locking slide.

Attach the handlebar body and tighten the 4 screws. (When tightening the screw, the first step screw is 90% tight, you must tighten it diagonally, according to the order 1-4-2-3; The second step all screws are 100% tightened.)

How to Ride

1. Power on the scooter and choose the speed mode. Please choose the speed mode before riding! Note: Speed mode can be chosen via the Dualtron app.
2. Stand on the footboard with one foot and push off with the other foot to start gliding. Make sure you have disabled SAFE mode. (SAFE mode setting via Dualtron app. Deactivate safe mode by squeezing brake lever.)
3. Put both feet on the footboard and stand stably. Pull the throttle to speed up.
4. Slow down by releasing the throttle and squeezing brake levers.
5. To turn, shift your body and turn the handlebar slightly. Please watch out for road conditions, sufficient turning space is required.

When hard braking, serious danger or injury may occur. Maintain a moderate speed and look out for potential hazards.

Folding

Step 1: Loosen the QR lever and move the locking slide upward.
Step 2: You must hold the steering tube with your hand to prevent falling down and hitting.
Step 3: Lay the steering tube down while raising the locking slide.

Lock the handlebar hook to the footrest. Ensure that the handlebar is locked when lifting the scooter.