STF Allure Portable Wireless Speaker

Welcome

Thank you for purchasing the STF Allure portable wireless speaker. This manual will guide you through its features and operation to ensure optimal performance. Please read it carefully before use.

Note: For best results, ensure the speaker is fully charged before its first use.

Table of Contents

01. Package Contents

• Wireless Speaker: 1 piece
• Charging Cable: 1 piece
• User Guide: 1 piece

02. Product Diagrams

Speaker Diagram

1. Previous Song / Volume Down: Press and hold to decrease volume. Press once to go to the previous song.

2. Play / Pause: Press once to play or pause audio. Press and hold to activate pairing mode.

3. Next Song / Volume Up: Press and hold to increase volume. Press once to go to the next song.

4. LED Illumination: Press to control LED lighting effects.

5. Equalizer (EQ): Press to cycle through equalizer presets.

6. Power On/Off: Press and hold for 4 seconds to turn the speaker on or off.

7. Mode Change: Press to switch between functions (Bluetooth, USB, Micro SD, FM Radio, AUX).

Rear Panel Diagram

1. Type-C Charging Port: For charging the speaker.

2. USB Memory Input: For playing audio from a USB drive.

3. Micro SD Memory Input: For playing audio from a Micro SD card.

4. 3.5mm Auxiliary Audio Input: Connect external audio devices via a 3.5mm cable.

5. 6.3mm Microphone Input: For connecting a microphone.

03. Specifications

• Wireless Connection: Bluetooth 5.3
• Wireless Range: 10 m (33 ft)
• TWS Wireless Connection: Yes
• Speaker Diameter: 5" x 2 (12.7 cm)
• Impedance: 4 ohm
• Output Power: 20 W
• Sound Pressure Level: 86 dBSPL
• Frequency Range: 90 Hz - 18 kHz
• Battery Capacity: 3000 mAh
• Playback Time: 3 hours
• Charging Time: 5 hours
• Power Input: 5 Vcc 1 A
• Charging Port: Type-C
• Memory Input: USB / Micro SD
• Memory Storage Capacity: Up to 32 GB (MP3 format)
• FM Radio: Yes
• Auxiliary Audio Input: 3.5 mm x 1
• Microphone Input: 6.3 mm x 1
• Illumination Type: RGB LED

04. Usage Instructions

Powering On and Off

To Power On/Off: Press and hold the Power button (6) for 4 seconds.

Wireless Connection

1. Turn on the speaker. The wireless connection mode will activate automatically.
2. On your device (phone, tablet, laptop), go to Bluetooth settings and select "STF ALLURE" to pair.
3. If prompted for a password, enter "0000".
4. Once paired, the speaker will remain connected until manually disconnected or the connected device is reset.

Note: Ensure you are within 60 cm (approx. 2 ft) of the speaker during initial pairing and avoid obstructions.

True Wireless Stereo (TWS) Function

1. Turn on both speakers by pressing and holding the Power button (6) for 4 seconds on each. Wireless connection mode will activate automatically.
2. On both speakers, briefly press the Power button (6) once.
3. You will hear a sound indicating that the two speakers are connecting in TWS mode.

Note: For TWS connection, ensure no other devices are already connected wirelessly to the speakers. This function is only available in wireless mode.

Audio Playback

• Volume Up: Press and hold the "Next Song / Volume Up" button (3).
• Volume Down: Press and hold the "Previous Song / Volume Down" button (1).
• Play/Pause: Press the Play/Pause button (2) once.
• Next Song: Press the "Next Song / Volume Up" button (3) once.
• Previous Song: Press the "Previous Song / Volume Down" button (1) once.

Note: When using the auxiliary input, song selection (next/previous) must be controlled by the connected device.

3.5mm Auxiliary Audio Input

1. Turn on the speaker. Wireless mode activates automatically.
2. Insert a 3.5mm audio cable into the auxiliary port (4). The speaker will automatically switch to AUX mode.
3. Control playback and volume using the connected device.

USB Memory / Micro SD Function

1. Turn on the speaker. Wireless mode activates automatically.
2. Insert a USB drive or Micro SD card into the corresponding port (2 or 3). Music in MP3 format will play automatically.
3. Use the playback controls (1, 2, 3) to manage your music.

Note: Ensure audio files are in MP3 format. The maximum supported capacity for memory cards is 32 GB.

FM Radio Function

1. Turn on the speaker. Press the Mode Change button (7) until you hear "FM Radio".
2. Volume Up: Press and hold the "Next Song / Volume Up" button (3).
3. Volume Down: Press and hold the "Previous Song / Volume Down" button (1).
4. Scan Stations: Press the Play/Pause button (2) once to scan for FM stations.
5. Next Station: Press the "Next Song / Volume Up" button (3) once.
6. Previous Station: Press the "Previous Song / Volume Down" button (1) once.

Equalizer (EQ)

You can modify the speaker's equalizer settings in any playback mode.

1. Press the EQ button (5) to cycle through the 5 available equalizer presets.

Microphone Function

1. Insert a microphone into the 6.3mm microphone input (5).
2. To select between 3 echo effect levels for the microphone, press and hold the Mode button (7) for 2 seconds.

LED Illumination

Press the LED Illumination button (4) to control the RGB lighting effects.

Speaker Indications

Refer to the diagrams for button functions and port locations.

05. Warranty

Stuffactory, S.A. de C.V. warrants this product for a period of 5 years against manufacturing defects from the date of purchase.

To Make a Claim:

1. Contact Stuffactory via phone at 33 8995 2505 or email at soporte@stuffactory.mx.
2. Ensure the warranty is properly sealed and signed by the retailer.
3. Present the original purchase receipt with the date of purchase clearly visible and in good condition.

Warranty Void If:

• The product has been used in conditions other than normal (e.g., water damage, fire, physical damage).
• The product has not been operated according to the user manual.
• The product has been opened, altered, or repaired by unauthorized personnel.

06. Contact

For customer support and warranty claims, please contact Stuffactory:

• Phone: 33 8995 2505 (National Toll-Free)
• WhatsApp: 33 2181 9661
• Email: soporte@stuffactory.mx

You can also find the complete manual on our website: www.stf.tech.

Important Safety Information & Compliance

• Read the user manual of any device connected to the speaker thoroughly.
• This device may not cause harmful interference and must accept any interference received, including interference that may cause undesired operation.
• Do not expose the speaker to high temperatures or open flames.
• Do not attempt to disassemble or repair the speaker yourself. Contact authorized technical support.
• Avoid using the speaker in humid environments that could cause damage.

Trademarks: Stuffactory®, STF® and their logos are licensed exclusively to Stuffactory, S.A. de C.V.