Copenhagen LED gen2 small
BRS561 LED24/740 II DN10 GR CLO C10K FQQ
Brand: Philips Lighting
Product Overview
The original Copenhagen luminaire was co-designed with Copenhagen's Office of City Architecture in the 1960s with the aim of enhancing the aesthetic appeal of the city through lighting. This timeless luminaire design comes in two types: Copenhagen City LED Gen2 is for city and residential areas where light comfort is important; Copenhagen LED Gen2 delivers high performance for road lighting applications. The second generation of Copenhagen LED is available in a range of sizes, from mini to mega. This makes it suitable for any type of application while ensuring the dimensions of the luminaire and pole are well balanced, so every installation blends harmoniously into its surroundings. Various suspensions are available, allowing a variety of mounting options to provide maximum freedom during installation. Thanks to the built in Philips LEDGINE-O engine, and the wide range of application-tailored optics, Copenhagen LED luminaires deliver the right amount of light and in the right direction on your street, enabling important energy savings. The luminaire is available with one or two Zhaga-D4i (ZD4i) System Ready (SR) sockets, which makes the luminaire future ready. This means Copenhagen LED Gen2 is ready to pair with advanced control and lighting software applications such as Interact, or sensors such as the Philips Outdoor Sensor Bundle (OSB). And because the top SR socket is integrated into the canopy, it has no impact on the beautiful, clean design of the luminaire. Furthermore, every Copenhagen LED Gen2 BPS559, BRS561, BRS562 and BRS563 luminaire is uniquely identifiable, thanks to the Signify Service tag app. By simply scanning a QR code, placed inside the door of the mast or directly on the luminaire, you can instantly access the configuration of the luminaire. This makes maintenance and programing operations faster and easier and enables you to create a digital library of lighting assets and spare parts.
A stylized graphic depicting a series of ascending steps, symbolizing architectural integration or progression.
Product Data
| Category | Specification |
|---|---|
| General Information | |
| Lamp family code | LED24 [LED Module 2400 lm] |
| Light source color | 740 neutral white |
| Light source replaceable | Yes |
| Number of gear units | 1 unit |
| Driver/power unit/transformer | Power supply unit with DALI interface and constant light output |
| Driver included | Yes |
| Optical element | Flat glass |
| Optical cover/lens type | Flat glass |
| Luminaire light beam spread | Distribution narrow 10 |
| Control interface | DALI |
| Connection | Cable 10 m without plug |
| Protection class IEC | Safety class II |
| Flammability mark | Yes |
| CE mark | Yes |
| ENEC mark | ENEC mark |
| Warranty period | 5 years |
| Optic type outdoor | Distribution narrow 10 |
| Constant light output | Yes |
| Number of products on MCB of 16 A type B | 26 |
| EU RoHS compliant | Yes |
| Light source engine type | LED |
| Product family code | BRS561 [Copenhagen gen2 LED Small] |
| Light technical | |
| Upward light output ratio | 0 |
| Standard tilt angle posttop | 0° |
| Standard tilt angle side entry | 0° |
| Operating and electrical | |
| Input Voltage | 220/240 V |
| Input Frequency | 50 to 60 Hz |
| Initial CLO power consumption | 14.8 W |
| Average CLO power consumption | 14.8 W |
| End CLO power consumption | 15 W |
| Inrush current | 21 A |
| Inrush time | 0.225 ms |
| Power Factor (Min) | 0.93 |
| Controls and dimming | |
| Dimmable | Yes |
| Mechanical and housing | |
| Housing Material | Polyethylene |
| Reflector material | Polymethyl methacrylate |
| Optic material | Glass |
| Optical cover/lens material | Glass |
| Fixation material | Aluminum |
| Mounting device | Side-entry for diameter 48 mm |
| Optical cover/lens shape | Flat |
| Optical cover/lens finish | Clear |
| Overall height | 312 mm |
| Overall diameter | 380 mm |
| Effective projected area | 0.08 m² |
| Color | Gray |
| Dimensions (Height x Width x Depth) | 312 x NaN x NaN mm |
| Approval and application | |
| Ingress protection code | IP66 [Dust penetration-protected, jet-proof] |
| Mech. impact protection code | IK08 [5 J vandal-protected] |
| Surge Protection (Common/Differential) | Luminaire surge protection level until 6 kV differential mode and 6 kV common mode |
| Initial performance (IEC compliant) | |
| Initial luminous flux (system flux) | 2088 lm |
| Luminous flux tolerance | +/-7% |
| Initial LED luminaire efficacy | 141 lm/W |
| Init. Corr. Color Temperature | 4000 K |
| Init. Color Rendering Index | ≥70 |
| Initial chromaticity | (0.3818, 0.3796) SDCM <5 |
| Initial input power | 14.8 W |
| Power consumption tolerance | +/-10% |
| Init. Color Rendering Index Tolerance | +/-2 |
| Over time performance (IEC compliant) | |
| Control gear failure rate at median useful life* L100 | 100000 h |
| Lumen maintenance at median useful life* | 100000 h |
| Application conditions | |
| Ambient temperature range | -30 to +25 °C |
| Performance ambient temperature Tq | 25 °C |
| Product data | |
| Full product code | BRS561 LED24/740 II DN10 GR CLO C10K FQQ |
| Order product name | 871951413563500 |
| EAN/UPC - Product | 8719514135635 |
| Order code | 919008635240 |
| Numerator - Quantity Per Pack | 1 |
| Numerator - Packs per outer box | 1 |
| Material Nr. (12NC) | 919008635240 |
| Net Weight (Piece) | 5.400 kg |
Dimensional Drawing
A diagram illustrating the luminaire's physical dimensions. It specifies a side-entry diameter of 48 mm, an overall height of 312 mm, and an overall diameter of 380 mm. The diagram also indicates the luminaire's ingress protection rating as IP66 and its mechanical impact protection rating as IK08.
Photometric Data
Two polar intensity diagrams are presented, detailing the light distribution characteristics of the BRS561 luminaire. These diagrams, labeled OFPC1 and OFPL1, show luminous intensity in candela per 1000 lumens (cd/1000 lm) across various angles. The Light Output Ratio (L.O.R.) is noted as 0.88. The diagrams are based on the BRS561 FG T25 1 xLED24-4S/740 DN10 configuration and include specific photometric parameters like Imax and C/γ angles.
