Steve Harris Precision Bass MN (014-1032-305)
Parts Layout
This section provides a visual representation of the Fender Steve Harris Precision Bass guitar, indicating the location of various components with numbered callouts.
Diagram Description: The diagram shows the outline of a Precision Bass guitar. On the left, a front view details the headstock, neck, body, pickguard, bridge, and control cavity. On the right, a rear view shows the neck plate and strap buttons. Numbered circles point to specific parts:
- 1: Body
- 2: Neck
- 3-5: Tuning machines (keys) and associated bushings
- 6: String guide
- 7: Screw for string guide
- 8: Pickguard
- 9: Screw for pickguard
- 10: Pickup (identified as Split Coil)
- 11: Screw for pickup
- 12-13: Control knobs (Master Volume, Master Tone)
- 14-15: Hardware for control mounting (washer, nut)
- 16: Output Jack
- 17-19: Hardware for output jack/controls (washer, nut)
- 20: Bridge (identified as High Mass Bridge Assy)
- 21: Screw for bridge
- 22: Neck plate
- 23: Neck mounting screws
- 24-25: Strap buttons and screws
Parts List
The following table details the components of the Steve Harris Precision Bass, including reference numbers, descriptions, and part numbers.
| REF # | DESCRIPTION | PART NUMBER |
|---|---|---|
| 1 | BODY P BASS MPL OWT STRP B&P | 7706734505 |
| 2 | NECK P BASS STEVE HARRIS MN MX B&P | 7706733000 |
| 3 | KEY ASSY BASS W/O BUSH | 0076568049 |
| 4 | BUSHING FOR KEY | 0076568000 |
| 5 | SCRW SMAB 3x3/8 RHP NI | 0011357049 |
| 6 | STRING GUIDE DISC BASS | 0013235000 |
| 7 | SCRW SMAB 4x1/2 OHP NI | 0015578049 |
| 8 | PICKGUARD STEVE HARRIS CHROME | 0077932000 |
| 9 | SCRW SMAB 4x1/2 OHP NI | 0015578049 |
| 10 | PICKUP STEVE HARRIS SD SPB-4 | 7700153000 |
| 11 | SCRW SMA 8x1-3/4 OHP NI | 0015636049 |
| 12 | KNOB STD P BASS CHROME NS003 | 0081501000 |
| 13 | CONTROL 250K 10% AUDIO META | 0990831000 |
| 14 | WASHER LOCK INTL 3/8 X .687 | 0016436049 |
| 15 | NUT HEX 3/8-32x3/32 TK NI | 0016352049 |
| 16 | JACK PHONE 1/4 - OUTPUT | 0047329400 |
| 17 | WSHR FLAT 3/8x.614 NI | 0031153049 |
| 18 | WASHER LOCK INTL 3/8 X .687 | 0016436049 |
| 19 | NUT HEX 3/8-32x3/32 TK NI | 0016352049 |
| 20 | FENDER HIGH MASS BRIDGE ASSY | 0091066000 |
| 21 | SCRW SMAB 5x1 OHP NI | 0015610049 |
| 22 | PLATE NECK MTG-CHR, STD STR | 0033024000 |
| 23 | SCREW 4X1-1/4 WOOD RD PH NI | 0027035049 |
| 24 | BUTTON STRAP NI 0.156 | 0994915000 |
| 25 | SCRW WOOD 6x1 OHP NI | 0016188049 |
Wiring Diagram
This section illustrates the internal electronic connections of the Steve Harris Precision Bass.
Diagram Description: The wiring diagram shows the signal path from the pickups to the controls and output jack. The diagram features:
- Split Pickups: Connected to the volume and tone controls.
- Master Volume: Potentiometer controlling the overall output level.
- Master Tone: Potentiometer controlling the treble roll-off, connected via a capacitor.
- Capacitor: Specified as 0.05μf, part of the tone control circuit.
- Output Jack: The 1/4" jack where the instrument cable is plugged in.
- Ground Connection: A black wire is shown running from the circuit to the bridge, providing a ground connection.
Switch & Control Function
This section details the layout and function of the guitar's controls.
Diagram Description: The diagram displays the control plate area of the bass. It shows the placement of the Master Volume knob and the Master Tone knob. The split pickups are also indicated in their position on the body.
