Fender American Original Precision Bass (0190120XXX)
Parts Layout
This section presents a parts layout diagram for the American Original Precision Bass. It features front and back views of the instrument, with various components labeled with reference numbers (1-29) indicating their positions on the bass body, neck, and headstock.
Parts List
| REF# | DESCRIPTION | PART NUMBER |
|---|---|---|
| 1 | BODY AM ORIGINAL 60'S P-BASS 3TSB | 7710947500 |
| 1 | BODY AM ORIGINAL 60'S P-BASS LPB | 7710945502 |
| 1 | BODY AM ORIGINAL 60'S P-BASS OWT | 7710945505 |
| 2 | NECK AM ORIGINAL 60'S P-BASS RW | 7710948000 |
| 3 | KEY SET VINT BASS | 0078834000 |
| 4 | BUSHING STRING POST VINT BASS | 0019509049 |
| 5 | SCREW SMAB 3 X 3/8 RHP NI | 0011357049 |
| 6 | STRING GUIDE 60'S AM VINT | 0095422000 |
| 7 | SCREW SMA 5 X 5/8 OHP NI | 0015602049 |
| 8 | SCREW WOOD 8 X 2 OHP STL BRITE NI | 0058060000 |
| 9 | THUMB REST | 0992036000 |
| 10 | SCREW SMAB 5 X 1 OHP NI | 0015610049 |
| 11 | PICKGUARD 63 P-BASS BRN SHELL | 0097223000 |
| 12 | SCREW SMAB 4 X 1/2 OHP NI | 0015578049 |
| 13 | KNOB KNURLED CHROME | 0991366000 |
| 14 | CONTROL 250K 10% | 0990831000 |
| 15 | SET SCREW 8-32 X 3/16 | 0994922000 |
| 16 | NUT HEX 3/8-32 X 3/32 TK NI | 0016352049 |
| 17 | WASHER LOCK INTL 3/8 X .500 X .020 | 0022384049 |
| 18 | CAPACITOR CERAMIC DISC .1µF 50V | 0094393000 |
| 19 | JACK PHONE OPEN CIRCUIT | 0021956049 |
| 20 | WASHER FLAT 3/8 X .614 NI | 0031153049 |
| 21 | WASHER FLAT 3/8 X .687 | 0016436049 |
| 22 | BRIDGE ASSY P/J BASS CHROME | 0990804100 |
| 22A | BRIDGE PLATE JAZZ BASS | 0010538070 |
| 22B | BRIDGE SECTION VINTAGE BASS | 0019469000 |
| 22C | SET SCREW 6-32 X 7/16 OVPT SL NI | 0016105049 |
| 22D | SCREW M 6-32 X 1-1/2 RHP NI | 0015842049 |
| 22E | SPRING COMPRESSION 1-1/16 #144 | 0018689049 |
| 23 | PICKUP/SHIELD ASSY 63 P-BASS | 0095620000 |
| 24 | SCREW 4 X 1-1/4 WOOD RND PH NI | 0027035049 |
| 25 | STRAP BUTTON NI .156 | 0994915000 |
| 26 | SCREW WOOD 6 X 1 OHP NI | 0016188049 |
| 27 | SCREW WOOD 5 X 5/8 OHS NI | 0095368000 |
| 28 | BRIDGE COVER CHROME P-BASS | 0010108000 |
| 29 | PICKUP COVER STEEL CHROME VINT P-BASS UPG | 0096825000 |
| * | P-BASS CASE BLACK | 0096233011 |
Wiring Assembly
The wiring assembly diagram illustrates the internal electronic connections. It shows the pickup assembly connected to the volume control, which is then linked to the tone control and a capacitor (.1µF). The output jack is also depicted, along with a shield and a black wire leading to the bridge plate.
Switch and Control Function
This section highlights the control layout, indicating the placement of the pickup assembly, master volume knob, master tone knob, and the output jack on the bass guitar's pickguard.
Additional Specification Detail
Fret Size
Fret Size: Vintage. Fret dimensions are provided before installation: 2-13/16 inches length, 0.045 inches height, 0.083 inches width. Note: Neck thickness dimensions may vary slightly due to hand sanding and finishing.
Neck Profile
Neck Profile: Vintage "C". Includes diagrams showing the 1st fret profile and 12th fret profile cross-sections.
Tuning Machines
Staggered Tuning Machines Set: Part Number 0078834000. Outer shaft diameter: .552 inches. Includes a diagram of the tuning machine and its thru-hole diameter (.730 inches).
Hardware
Saddle Height Adjustment Screws: Part Number 0016105049.
Truss Rod Adjustment Nut: Part Number 0058171000.
Slotted Set Screws are also depicted.
Logo
Logo: Vintage '63 P-Bass applied over the finish. Includes patent numbers (2,968,204, 2,976,755, 2,573,254) and design numbers (187,001).
Pickup Specifications
| POSITION | MAGNETS | DC RESISTANCE | POLARITY |
|---|---|---|---|
| NECK | ALNICO 5 UNBEVELED | 5.7 - 6.3KΩ | SOUTH |
| BRIDGE | ALNICO 5 UNBEVELED | 5.7 - 6.3KΩ | NORTH |
