Manual for Electric Nail Clippers

Safety Matters

Please read these safety instructions carefully before first use.

• ⚠️ Babies under 1 year old are prohibited from using. Children aged 1-12 must be operated and used by a guardian.
• ⚠️ The blade is sharp and should only be used by children under adult supervision.
• ⚠️ Ensure proper placement to prevent children from touching or playing with the device, to avoid danger.
• ⚠️ Do not touch any body parts other than nails with the blade to avoid danger. During continuous operation, avoid leaning against anything other than nails, such as clothing or accessories, near the blade. Failure to do so may damage the blade or cause foreign objects to enter the blade, resulting in damage.

Matters Needing Attention

Please read these points carefully before first use.

• For first-time use, charge the device for at least 1 hour to ensure the internal battery is fully charged. Recharge every three months if not in use.
• This product is intended solely for trimming nails and is not suitable for other body parts.
• Do not use this product if there are wounds or problems around the nails.
• Do not wash or soak the product in water for cleaning. Keep away from water and fire sources.
• Keep out of reach of children.
• Do not use this product while it is charging.

Prohibited Actions

• Do not immerse the product in water or any other liquid.
• This product contains a built-in rechargeable battery. Do not expose it to fire or high temperatures during charging.
• Do not knock or drop the product. If the product is damaged due to collision or falling, discontinue use.
• Do not transform, disassemble, or repair this product yourself.

Product Introduction

This section provides an overview of the electric nail clipper and its components.

Product Views:

• Front View: Shows the main body of the device. Key features include an auxiliary light at the top, a pilot lamp, an on-off key, and a charging port located at the bottom.
• Right View: Displays the side of the device, indicating the location of the function key and the charging port.
• Rear View: Features the scrap silo (nail dust bin) and the tool head.
• Top View: Illustrates the top of the device, clearly showing the opening for the tool head.

Usage Method

1. Switch Operations

• Power On: Press and hold the 'on' key for approximately 3 seconds. The green indicator light will illuminate.
• Shutdown:
  • From the startup state, press and hold the power button for approximately 3 seconds to shut down the device.
  • The device will automatically shut down if no operation is performed for more than 15 seconds after being powered on.
• Gear Switching: Press the switch key to toggle between gears.
  • 1st (Low) Speed: The green indicator blinks once.
  • 2nd (High) Gear: The green indicator blinks twice.

2. Use

• Remove the front cover. Ensure the device is oriented with the indicator light facing upwards and the nail dust bin facing downwards.
• Insert the nail to be trimmed into the blade opening. Gently guide the nail in the direction of the blade. Move the nail or device slowly (not too fast) to ensure the entire nail is rounded.

Tip:

• ? Avoid staying in the same area for extended periods to prevent excessive pruning of the nail.