Electric Nail Trimmer

Introduction

Thank you for purchasing the Electric Nail Trimmer. Please read this manual thoroughly before operating this device.

Specifications

Caution

• The blade is sharp. Keep out of reach of children under 1 year old. Children between 1 and 12 years old should use this product only under adult supervision.
• Store the product safely and out of children's reach to avoid injury or misuse.
• Avoid contact with any body part other than nails to prevent injury.
• When the product is in operation, avoid touching the blades, accessories, or other tools to prevent malfunction or failure.
• Charge the product fully before first use to ensure the battery is adequately powered.
• This product is designed for nail trimming only; do not use it on other body parts.
• Do not use this product on wounds or broken skin.
• Do not wash or immerse the product in water. Keep it away from water and fire.
• Do not use the product while it is charging.
• The product contains a rechargeable battery. Do not expose it to fire or high temperatures.
• Handle the product carefully. Discontinue use if it is damaged due to impact or fall.
• Do not modify, disassemble, or attempt to repair the product yourself.

Parts Description

The Electric Nail Trimmer includes the following components:

• Cover: Protective casing for the device.
• Floodlight: Integrated light to illuminate the nail area.
• Indicator light: Shows the operational status (e.g., charging, power).
• Switch key: Button to turn the device on/off and switch gears.
• Storage box: Compartment to collect nail clippings.
• Nail clippers: The cutting mechanism for trimming nails.
• Finger position: Designated area for placing the finger during use.
• Charging port: Port for connecting the charging cable (Type-C).

The device is shown from different views: Front, Back, Top, and Right.

Package Contents

• 1 x Nail Trimmer
• 1 x Type-C Charging Cable
• 1 x Cleaning Brush

Instructions for Use

Usage Reminder

Using the Device

1. Startup:

   Press the switch key for 1 second to start gear 1 (low-speed). The work indicator light will illuminate. Press the switch again to activate gear 2 (high speed). To shut down, press the switch again; the work indicator light will turn off.

2. Operation:

   Remove the protective cover before use. Position the product with the indicator light facing up (storage bin facing down). Place your finger in the designated area, align your nail with the hole, and gently press the nail into the hole. Move the nail or the product slowly (avoid rapid movements or excessive pressure) to round the entire nail.

Tips for Best Performance

• Avoid trimming the same area repeatedly for extended periods to prevent damage.
• This product integrates cutting and grinding functions. It is normal to produce fine dust similar to nail shavings during use.
• To protect the motor, the product will automatically shut down after 5 minutes of continuous operation.

Cleaning

Turn off the product. Slightly pull the left side of the storage bin cover to open it. Dispose of the nail shavings from the storage bin and clean the bin with a small brush. Do not clean the storage bin while the machine is powered on.

Charging

• Please charge this product under the following conditions:
  • When using this product for the first time.
  • If you press the switch and the product does not start, the work indicator light flashes and then goes out.
• Use the provided Type-C charging cable with a power adapter (5V output) to charge this product.
• During normal charging, the indicator light will flash slowly and remain solid when charging is complete. A full charge takes approximately 1-2 hours.