Sharper Image Portable Electric Juice Cup YE-02
Product Specifications
Product Name: Portable Electric Juice Cup
Model: YE-02
- Capacity: 380ml
- Color Options: Pink, Sky Blue, Fruit Green
Materials:
- Cup Cover: Food Grade PP
- Cup Body: Food Grade PC
- Base: Food Grade ABS
- Blade: Stainless Steel 304
Motor Specifications:
- Type: DC3.6V
- Speed (No Load): 22000 rev/min ± 15%
- Speed (Load): 15000 RPM/min ±15%
- Working Current: 10-12A
Battery and Power:
- Battery Type: 3.7V 2000mAh
Dimensions:
- Product Size: 75mm x 75mm x 230mm (L*W*H)
Parts List
The document includes a visual diagram illustrating the exploded view of the portable electric juice cup, identifying key components. The following table details each part:
No. | Name | Material |
---|---|---|
1 | Silicone rope | Silica gel |
2 | Lid | PP |
3 | Silicon rubber sealing ring | Silica gel |
4 | Filter | FP |
5 | Sealing ring | Silica gel |
6 | Cup body | PC |
7 | Blade fixing buckle | ABS |
8 | Blade | SUS304 |
9 | Base | ABS |
10 | LED signal lamp | LED |
11 | Power switch | Silica gel |
12 | Charging jack | Intelligent interface |
13 | Base | ABS |
Instructions for Use
Charging
Before initial use, ensure the battery is fully charged. Use the provided data line. Charging time is approximately 3 hours. The product is compatible with all types of intelligent mobile phone chargers and power banks. A full charge provides power for 10-12 cups of fresh fruit juice.
Safety Precautions
- Do not unscrew the cover while the product is operating.
- Keep hands or other hard materials out of the cup body during operation to prevent accidents.
- Ensure the power switch is off before cleaning.
- Do not immerse the base in water to avoid damage to electronic components.
Operation Guidelines
- The product has a 5-second idle time before operation.
- The maximum continuous juice time is 90 seconds.
- The unit will automatically stop after 5 seconds of idling or 90 seconds of work. The green light will flash. Reset the switch to boot again.
- Avoid pressing the juice continuously for extended periods to prevent overheating and prolong product life.
Motor Lock Protection
If the motor stops due to large fruit pieces or blockage, the line protection program will activate, causing an automatic power-off. The LED will flash red. Turn off the switch, and after the LED stops flashing, touch the switch again to resume normal operation.
Material Care and Cleaning
- Do not use water above 50°C or microwave for disinfection to prevent thermal deformation damage.
- Do not place any parts in dishwashers or other cleaning equipment.
- Do not use steel wool, abrasive cleaning agents, or corrosive liquids for cleaning.
Intended Use and Storage
- This product is designed as a fresh fruit juice machine. It is not intended for grinding meat, nuts, or soy products.
- Store the product in a location not easily accessible to children.
- This product is not intended for use by individuals with reduced physical, sensory, or mental capabilities, or those lacking relevant experience and knowledge, including children, unless supervised.
Manufacturer Support
For personal or family use. In case of uncontrollable failures or issues requiring repair, please contact the manufacturer's customer service. The company is not responsible for damage resulting from unauthorized disassembly of electronic components.
Using Method
Juicing Process:
- Prepare Fruit: Wash the fruit and cut it into small pieces, approximately 1.5x1.5cm. Remove seeds, hard materials, thick skins, or hard shells.
- Load Cup: Fill the cup with fruit up to about 60% of its capacity. Add water so the total amount reaches about 80% of the cup's capacity.
- Operate: Invert the product and press the power switch. The motor will start rotating.
- Juicing Time:
- Apples and pears typically require 1-1.5 minutes of operation.
- Citrus, oranges, and strawberries require 30 seconds to 1 minute.
- Enhance Juicing: Gently shake the product during operation for better juice extraction.
- Completion: Once juicing is finished, turn off the power switch and unscrew the cover for drinking.
- Filtering: If there is excessive fruit residue, use the filter to strain the juice before drinking.
Tips
- Before juicing, clean the cup with pure water. Remember to cut the fruit flesh into 1.5*1.5cm small blocks.
- After loading the pulp, invert the product. First, touch the switch to make the blade rotate, then the product can be used for juicing.
- If the fruit juice is finished, you can turn it over to stop, and then restart if needed. During use, shaking the cup body can improve the juicing effect.
- After pressing the juice, clean the cup with a cup cleaning brush. Never open the machine seat and flush it directly with water, as water entering the base will lead to failure and damage.
Failure Analysis and Troubleshooting
Failure Phenomena | Cause Analysis | Elimination Method |
---|---|---|
Cannot boot or the red light is often on | Low battery | Please charge in time |
Green light flashing (during use) | Idle for 5 seconds or 90 seconds load shutdown protection | Reboot |
Green light flashing (during use) | Motor lock | Exclude the card after rebooting |
Leakage | Silicone ring assembly is not in place | Please reinstall the silicone ring |
Reminder
This product is suitable for charging with all kinds of smart phone chargers and power banks. A 3-hour charge can provide fresh fruit juice for 10-12 cups. Thank you for your use.