Manuals+

PRUVEEO D90-4CH Dash Cam User Manual

This manual provides comprehensive instructions for the PRUVEEO D90-4CH dash cam.

05 Device Layout

This section details the physical components and buttons of the dash cam.

Device Components:

Button Functions:

ButtonFunctions

[?] Power Button

Press to turn on or off the screen. Press and hold for 3 seconds to turn the device on or off.

[✅] OK Button

Press to confirm a selection while in setting mode. In Recording Mode, acts as Emergency Lock (Press to manually lock/unlock the video file during recording).

[☰] Menu Button

Please stop recording first. Press Once / Twice to switch between settings, press and hold for 3 seconds to exit the menu. Press and hold for 3 seconds to switch between video recording/playback modes. In Playback mode, press to switch between the four cameras.

[▶️/☰] Button

Press to navigate UP through options in settings mode. Press to start/stop video recording. Press and hold for about 3 seconds to take a photo [?].

[▶️/☰] Button

Press to navigate DOWN through options in settings mode. Press to switch the image between the four cameras. Press and hold for 3 seconds to turn the Audio recording on/off.

[↩️] Reset Button

Press and hold for 5 seconds to reset the device if it operates erratically, hangs up, or freezes.

Package Contents

The package typically includes the following items:

Installation Guides

06 Dash Cam Installation

Follow these steps to install the dash cam:

  1. Place the dash cam on the mount. Carefully route the power cable around the windscreen and tuck it under the trim.
  2. Plug the power cord into a 12V DC power outlet or the car cigarette lighter.
  3. Connect the power cord to the camera. The camera will auto-start recording once powered on.

The dash cam automatically powers on when plugged into a 12V accessory socket or cigarette lighter and the vehicle is started. To turn the device on manually, press and hold the power button [?] until the welcome screen appears. The camera will automatically start recording when powered on.

You need to insert a memory card [?] before recording. Ensure the dash cam is powered down before inserting or removing a memory card. Gently push the memory card into the slot until it clicks, and allow the spring release to push the card out.

Power the dash cam by connecting the charger to the car cigarette lighter and the dash cam. Ensure the dash cam records to your memory card properly. Before using a new memory card, format it within the camera using the format function. Always back up important data before formatting.

Mount the rear camera and dash cam as shown in the diagrams. Use the provided rear camera cable to connect the rear camera to the front camera.

07 Rear Camera Installation

To install the waterproof rear camera with a parking assist function:

  1. Locate a suitable mounting position for the rear camera (e.g., rear windshield or license plate area) ensuring a clear view behind the vehicle.
  2. Clean the mounting surface thoroughly with an alcohol wipe for proper adhesion.
  3. Use the included mounting bracket or adhesive pad to secure the camera.
  4. Route the rear camera cable along interior trim panels, headliner, and pillars towards the front of the vehicle, using cable clips or tucks.
  5. Connect the rear camera cable to the "Rear Cam" port on the main dash cam unit.
  6. For parking assist, connect the rear camera's trigger wire to the reverse light circuit. Locate reverse light wires (near rear lights/trunk) and use a multimeter/tester to identify the power wire.
  7. Connect the trigger wire to the reverse light wire using a wire tap or solder. This enables the rear camera to display automatically when the vehicle is in reverse.
  8. Test by shifting into reverse. The dash cam display should switch to the rear camera view with parking assist lines.
  9. Adjust the rear camera's angle and position for optimal viewing. Some cameras allow image flipping/mirroring.
  10. Secure any loose cables with ties or tucks to prevent interference.
  11. The rear camera's red wire provides 12-volt power. It's not necessary to connect if parking assist is not used. For parking assist, connect the red wire to the reverse light power source to automatically display the rear camera view when in reverse.

08 3M Adhesive Mount Installation

Step 1: Clean the area of the windshield where you plan to stick the 3M adhesive mount.

Step 2: Attach the windshield sticker applicator (included) to the windshield to make it easier to remove the 3M adhesive mount later.

Step 3: Peel off the protective film from the adhesive on the mount.

Step 4: Press the adhesive side of the mount firmly against the windshield for about 30 seconds. Allow the adhesive to set for 2 hours before attaching the dash cam.

Step 5: Try and move the mount to check for stability. Attach the dash cam to the mount and adjust the recording angle.

09 Suction Cup Mount Installation:

Step 1: Clean the windshield area where you plan to place the suction cup mount.

Step 2: Peel off the plastic protective film on the suction cup mount.

Step 3: Ensure the locking lever is in the UP position.

Step 4: Press the mount's button down with good force to create suction.

Step 5: Rotate the mount's lever down to lock it.

Step 6: Try and move the mount to check for stability. Attach the dash cam to the mount and adjust the recording angle.

Memory Card Management

10 Inserting the Memory Card [?]

Your device accepts memory cards with a maximum capacity of 256 GB. Compatibility may vary by manufacturer and type; using an incompatible card may damage the unit or data.

To insert a memory card:

It is recommended to reformat a memory card [?] each time you transfer videos to a computer, or at least once a month. Reformatting keeps data and file structure clean, preventing error messages and missing images, and helps prevent corruption.

11 Removing the Memory Card [?]

Before removing a memory card, you must first unmount it for safe removal.

To remove a memory card:

  1. Press the Video Capture button to stop recording.
  2. Press and hold the power button [?] to turn off the unit.
  3. Gently push in and release the memory card until it unlocks.

DO NOT remove the memory card while the device is transferring or accessing information, as this may result in data loss, corruption, or damage. PRUVEEO is not responsible for any loss resulting from the use of damaged memory cards.

12 Formatting the Memory Card [?]

Performing this operation will format the memory card and erase all files, including locked videos. Ensure important footage is backed up before formatting.

To format the SD card:

  1. Press the Video Record button to stop recording.
  2. Press the MENU button [☰] twice to enter General Settings.
  3. Press the DOWN button [⬇️] to navigate to the "Format" option.
  4. Press OK [✅] to format the SD card.
  5. Press and hold the Menu button [☰] for 3 seconds to exit.

Format the card on the dash cam before using it. Always back up important data before formatting.

Parking Mode Details

To use the Parking Mode feature, you must also use the ACC Hardwire Kit. Please search for and purchase the "PRUVEEO ACC Hardwire Kit" on Amazon.com [?️].

ACC Hardwire Kit Wiring:

Warm Tips: When installing the ACC hardwire kit, please refer to the actual product.

Automatic Parking Mode: The ACC (ignition-switched) detection feature allows the dash cam to switch to parking mode automatically when the vehicle's engine turns off and switch back to normal recording when the engine turns on.

For installation information regarding the ACC hardwire kit, search for "acc hardwire kit parking mode" on YouTube.com [▶️].

Note: If you have difficulties with HWK installation, you can contact PRUVEEO for assistance with Fuse Schematics.

There are 2 options under parking mode; Time Lapse is recommended.

Important Note: If you do not use the parking mode function, please change "Gravity Sensing" to LOW sensitivity. Otherwise, the dash cam may lock videos, preventing deletion by the loop recording function, which can fill the memory card with locked videos and cause the recorder to fail.

Time-lapse Recording: This technique manipulates frame rate for creative filming and editing. Frame rate and playback speed are usually the same, but in time-lapse, the frame rate is stretched, making time appear to speed up during playback.

Record video at one frame per second to conserve memory and reduce review time. Time-lapse recordings are saved in the VIDEO folder and contain images but no sound.

⚠️ Caution: When NOT using the parking monitoring function, please turn it off. Otherwise, recorded video will be in fast-forward mode.

To turn off Parking Monitor:

  1. Press MENU [☰] twice to enter General Settings.
  2. Press the UP [⬆️] or DOWN [⬇️] button to navigate to the "Parking Monitor" option.
  3. Press OK [✅] to view the current selection (Off / Gravity Sensing [⚖️]/ Time Lapse).
  4. Press the UP [⬆️] or DOWN [⬇️] button to select the OFF option.
  5. Press OK [✅] to confirm your entry.
  6. Press and hold the Menu button [☰] for 3 seconds to exit.

Please scan the QR code or open the URL in your browser to view the installation video for the ACC hardwire kit: t.ly/21NNu.

Advanced Features and Settings

IR LED

Turn the infrared lights on or off.

To configure IR LED:

  1. Press MENU [☰] twice to access General Settings.
  2. Press the UP [⬆️] or DOWN [⬇️] button to navigate to the "IR LED" option.
  3. Press OK [✅] to confirm your entry.
  4. Using the Auto option is recommended.
  5. Press and hold the Menu button [☰] for 3 seconds to exit.

System Volume

Increase or decrease the volume of your dash cam.

To adjust System Volume:

  1. Press MENU [☰] twice to enter General Settings.
  2. Press the UP [⬆️] or DOWN [⬇️] button to navigate to the "System Volume" option.
  3. Press OK [✅] to display the current selection (High/Middle/Low/Close).
  4. Press OK [✅] to confirm your selection.
  5. Press and hold Menu [☰] for 3 seconds to exit.

Key Sound

Turn the device's button sound effect on or off.

To configure Key Sound:

  1. Press MENU [☰] twice to enter General Setup.
  2. Press the UP [⬆️] or DOWN [⬇️] button to navigate to the "Key Sound" option.
  3. Press OK [✅] to see the current selection (On/Off).
  4. Press the UP [⬆️] or DOWN [⬇️] button to turn this feature on or off.
  5. Press OK [✅] to confirm your entry.
  6. Press and hold the Menu button [☰] for 3 seconds to exit.

Date and Time

Change the time and date of the unit.

To set Date and Time:

  1. Press MENU [☰] twice to enter General Settings.
  2. Press the UP [⬆️] or DOWN [⬇️] button to navigate to the "Date and Time" option.
  3. Press OK [✅] to display the date/time in the format YYYY/MM/DD HH:MM:SS.
  4. Press the UP [⬆️] or DOWN [⬇️] key to change the highlighted number.
  5. Press OK [✅] to move to the next date/time segment and repeat step 4.
  6. Press OK [✅] again to confirm your entry.
  7. Press the Menu button [☰] to exit the date and time setting.
  8. Press and hold the Menu button [☰] for 3 seconds to exit.

Set Time Zone

Updates the time automatically with your time zone.

To set Time Zone:

  1. Press MENU [☰] twice to enter General Settings.
  2. Press the UP [⬆️] or DOWN [⬇️] button to navigate to the "Set Time Zone" option.
  3. Press OK [✅] to view the current selection.
  4. Press the UP [⬆️] or DOWN [⬇️] button to make your selection.
  5. Press OK [✅] to confirm your entry.
  6. Press MENU [☰] to exit settings.

Daylight Saving

Enable / Disable Daylight Saving Time.

To configure Daylight Saving:

  1. Press MENU [☰] twice to enter General Settings.
  2. Press the UP [⬆️] or DOWN [⬇️] button to navigate to the "Daylight Saving" option.
  3. Press OK [✅] to view the current ON/OFF status for this feature.
  4. Press the UP [⬆️] or DOWN [⬇️] button to enable or disable this feature.
  5. Press OK [✅] to confirm your entry.
  6. Press MENU [☰] to exit settings.

GPS Speed Unit

Select GPS speed unit (built-in GPS logger).

To set GPS Speed Unit:

  1. Press MENU [☰] button twice to enter General Settings.
  2. Press the UP [⬆️] or DOWN [⬇️] button to navigate to the "GPS Speed Unit" option.
  3. Press OK [✅] to view the current selection (KM/H / MP/H / OFF).
  4. Press the UP [⬆️] or DOWN [⬇️] button to make your selection.
  5. Press OK [✅] to confirm your entry.
  6. Press MENU [☰] to exit settings.

GPS Information

View the current GPS signal status.

To view GPS Information:

  1. Press MENU [☰] twice to enter General Settings.
  2. Press the UP [⬆️] or DOWN [⬇️] button to navigate to the "GPS Information" option.
  3. Press OK [✅] to view the current GPS signal status.
  4. Press MENU [☰] to exit.

Wi-Fi [?]

Connect to Wi-Fi to operate the dash cam.

To configure Wi-Fi:

  1. Press MENU [☰] twice to enter General Settings.
  2. Press the UP [⬆️] or DOWN [⬇️] button to navigate to the "WiFi" option.
  3. Press OK [✅] to see the current ON/OFF status of this feature.
  4. Press the UP [⬆️] or DOWN [⬇️] button to change your selection.
  5. Press OK [✅] to confirm your selection.
  6. Press MENU [☰] to exit settings.

Alternatively, use a hotkey: Press and hold OK [✅] for about 3 seconds to turn the Wi-Fi feature on/off.

Wi-Fi Connection Guide

The dash cam's built-in Wi-Fi allows you to change settings and play/download recorded video using a smartphone app.

To view the GPS track of a video, download the video to your phone first.

The effective working distance of Wi-Fi is 5 meters.

Downloading the Wi-Fi App

The Wi-Fi app is available for free download from the Apple App Store™ and Google Play Store™.

To Pair the Camera with Your Device

  1. Turn on the camera. Stop recording by pressing the Video Recording button.
  2. Press and hold the OK [✅] button for about 3 seconds to start the Wi-Fi function (or start it via the menu).
  3. The LCD screen will display the Wi-Fi SSID and password.
  4. On your smartphone/tablet, search for a Wi-Fi hotspot, select the network, and enter the password '12345678' to connect. Once connected, you can use the Wi-Fi function key. Press and hold the Wi-Fi key to exit.
  5. Open the GFGCAM application on your smartphone/tablet.

You can also scan the QR code to download the GFGCAM APP.

Playback and Software

Restore Factory Settings

Performing this operation resets all device settings to their original values. All custom settings will be lost.

To restore factory settings:

  1. Press MENU [☰] twice to access General Settings.
  2. Press the UP [⬆️] or DOWN [⬇️] button to navigate to the "Restore Factory Settings" option.
  3. Press OK [✅] to display YES / NO confirmation.
  4. Press the UP [⬆️] or DOWN [⬇️] key to make your selection.
  5. Press OK [✅] to confirm your selection.
  6. Press and hold the Menu button [☰] for 3 seconds to exit.

Video Playback

You can play videos on the device or a computer. To play on a computer, use an SD card adapter [?]. Remove the memory card, insert it into an adapter, and then insert the adapter into the computer.

Video Folders:

The video files and photos recorded by the four cameras (FRONT, LEFT, REAR, RIGHT) are stored in these folders.

To play a video on the device:

  1. Stop recording and press and hold the M button [☰] to switch to Playback mode.
  2. Use the UP [⬆️] and DOWN [⬇️] buttons to scroll to the desired video.
  3. Press the OK [✅] button to play.
  4. During playback: Use OK [✅] to pause, UP [⬆️] (press and hold) to rewind, and DOWN [⬇️] (press and hold) to fast forward.

GPS Video Playback

Play back recordings in a special application to view speed and location information along with footage.

Access Video Files: Insert the micro SD card [?] into your computer to access video files.

To open a GPS video file:

  1. Once the application is opened, navigate to the top menu bar and click File > Open to browse your files.
  2. Browse to the video file, select it, and click Open to load it into the application. You can also select multiple videos at once.
  3. After a short loading time, the video will start playing automatically, displaying real-time speed and location information.

Warm Tips

Most dash cam problems are caused by the memory card [?] not meeting speed and endurance requirements. PRUVEEO recommends High Endurance 128GB or 256G MicroSDXC memory cards for the D90-4CH dash cam to ensure stability and reliability.

PLEASE DO NOT USE "Generic Class 10" cards from third-party suppliers, as they are not made for 4-channel recording dash cams.

PDF preview unavailable. Download the PDF instead.

D904CH-TYPE-C-User Manual-20241026 ?v=1729915634 Adobe PDF library 16.00 Adobe Illustrator 25.4 (Windows)

Related Documents

Preview PRUVEEO D90-4CH Dash Cam User Manual
Comprehensive user manual for the PRUVEEO D90-4CH Dash Cam, covering safety, installation, features, operation, and troubleshooting.
Preview Dash Cam Mount Installation Guide: Suction Cup and 3M Adhesive
This guide provides step-by-step instructions for installing dash cam mounts using both suction cup and 3M adhesive methods. Learn how to properly clean surfaces, apply mounts, and ensure stability for your dash camera.
Preview PRUVEEO D90-4CH Dash Cam User Manual
Comprehensive user manual for the PRUVEEO D90-4CH Dash Cam, covering safety information, installation, features, operation, and troubleshooting.
Preview PRUVEEO D90-4CH Dash Cam User Manual
Comprehensive user manual for the PRUVEEO D90-4CH dash cam, covering installation, operation, features, and troubleshooting. Learn how to set up and use your dash cam for optimal performance.
Preview PRUVEEO Smart Acc Hardwire Kit: Dash Cam Installation & Parking Mode Guide
Install your PRUVEEO Smart Acc Hardwire Kit for dash cams. This quick guide covers product overview, safety, installation steps, specifications, and low voltage protection for parking mode. Visit pruveeo.us for support.
Preview PRUVEEO Dash Cam User Manual
Comprehensive user manual for the PRUVEEO Dash Cam, covering safety information, device layout, installation, memory card management, video settings, loop recording, date stamp, plate number, exposure, WDR, audio recording, G-sensor, Wi-Fi connectivity, parking monitor, system settings, and video playback.