Installation Instructions
Product: Philips LLC785x/00
Model Variants:
- Light Grey: LLC7850/00, LLC7852/00, LLC7854/00, LLC7856/00
- Dark Grey: LLC7851/00, LLC7853/00, LLC7855/00, LLC7857/00
General Information
This document provides installation instructions for the Philips LLC785x/00 lighting node.
Document Number: 4422 845 46135
Date: 30 September 2021
Dimensions and Specifications
Dimensions:
- Height: 41.8 mm (1.65 in)
- Width/Depth: 88.8 mm (3.50 in)
- Depth: 41.0 mm (1.61 in)
Operating Conditions:
- Max Temperature: 70 °C
- Min Temperature: -40 °C
- Relative Humidity (RH): 5-95%
Weight: 0.13 kg
Installation Steps
Step 1: Warning and Preparation
⚠️ Warning: Handle the product with care during installation.
Ensure installation environment meets the specified temperature and humidity conditions.
Step 2: Wiring Connections
The LLC785x/00 requires specific wiring connections. The driver must have short protection and basic insulation from the mains power supply.
- Line: Connect to the mains power line.
- Neutral: Connect to the mains power neutral.
- AUX (24 Vdc, Iout ≤ 1A): Auxiliary power connection.
- SR+
- SR-/SGND
- Not connected: Terminal marked for no connection.
The diagram shows these connections clearly labeled for a 'Designer Guide' context.
Step 3: Mounting
The product is shown mounted onto a surface, likely a ceiling or wall, with electrical connections made.
Step 4: Zhaga Book 18 Connection
Connect the device to a Zhaga Book 18 LEX-R interface. This involves a push-to-connect mechanism, indicated by "Push 20~50N".
Step 5: Power Check
After connections are made, check the LED status to confirm power is correctly supplied to the device.
RF Exposure Information
This device complies with EU requirements (2014/53/EU) regarding the limitation of public exposure to electromagnetic fields for health protection. The device meets RF specifications when used at a distance of 322 mm from the body.
Signify declares that the radio equipment type LLC7850/00, LLC7851/00, LLC7852/00, LLC7853/00, LLC7854/00, LLC7855/00, LLC7856/00, and LLC7857/00 are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at: http://www.philips.com/red
Legal and Company Information
©2019-2021 Signify Holding. All rights reserved. Specifications are subject to change without notice.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.
UK Importer: Signify Commercial UK Limited, 3, Guildford Business Park, GU2 8XG
For more information, visit: www.philips.com/lighting