Introduction
The Bluestone Magnetic Car Mount is designed to be a durable and versatile solution for holding smartphones in vehicles. Its sleek black design complements any car interior. The flexible gooseneck arm allows for positioning the device in various directions for optimal viewing. The suction cup base features a sticky adhesive for enhanced stability, ensuring the mount remains secure on the dashboard or windshield during journeys.
Package Contents
- 1x Magnetic Phone Holder
- 1x Socket
- 2x Metal Plates
- 1x Suction Cup Stand
Product Overview
Image shows the Bluestone Magnetic Car Mount with a smartphone attached. The mount features a flexible gooseneck arm, a magnetic head holding the phone, and a suction cup base.
Diagram labeling the components of the Bluestone Magnetic Car Mount: Magnet (top part holding the phone), Gooseneck Body (flexible arm), Ball & Joint (connecting arm to base), Suction Cup (base for mounting), and Lever (for securing the suction cup).
Specifications & Features
- Magnetic Square: Approximately 4 cm on each side
- Magnetic action for a strong hold
- Includes 2 Metal Plates for different mounting methods
- Stand Height: Normally 23.5 cm tall
- Suction Cup Diameter: 6.5 cm
- Strong and secure suction cup adheres to any flat surface
- Rubber grip all around the Magnet for enhanced phone stability
- Gooseneck Arm provides flexibility for any viewing angle
- 360° rotating phone bracket
- Easy Installation
- Sticky suction cup for enhanced adhesion
- Can adhere to windshield or dashboard
Illustration of a hand placing a smartphone onto the magnetic head of the car mount.
How to Use
1. Unboxing: Unpack all components and verify all items are present.
2. Assembly:
- Take the magnetic square and align it with the stand's socket.
- Screw the joint part onto the back of the square loosely.
- Leaving the joint loose allows the ball to pop into the socket easily.
- Once the ball is seated in the socket, tighten the knob securely.
3. Mounting:
- Remove the protective plastic film from the suction cup.
- Place the mount on the dashboard or windshield in the desired location.
- Pull down the lever on the bottom of the stand to ensure the suction is extra secure.
4. Attaching Phone:
- Place one of the magnetic plates on your phone.
- Position the phone against the magnetic square on the mount; it should attach strongly.
- Pull the phone away from the mount to remove it.
Care and Safety
- Use this unit only for its intended purpose.
- Keep the unit away from heat sources, direct sunlight, humidity, water, or any other liquids.
- Do not expose the device to extremely high or low temperatures, as this may damage it.
- Do not operate the unit if it has been wet or moist to prevent electric shock or injury, and to avoid damage to the unit.
- Do not use the unit if it has been dropped or damaged in any way.
- Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
- Keep the unit out of reach of children.
- This unit is not a toy.
