Bluestone MC12 Auto-Clamping Car Mount

Introduction

The Auto Clamping Dashboard Mount is designed to be a durable and versatile car accessory. Its sleek black design complements any car interior. The mount features an adjustable arm that allows for placement in various directions, offering flexible usage. The suction cup base includes a sticky adhesive for enhanced stability, ensuring the mount remains secure on dashboards or windshields during journeys.

Package Contents

• 1x Clamp and Release Phone Holder
• 1x Socket
• 1x Suction Cup Stand

Product Overview

The main product image displays the Bluestone MC12 Auto-Clamping Car Mount, featuring a clamp-style phone holder, an extendable arm, and a suction cup base. Key adjustable points are labeled as 'Angle', 'Tighten Knob', 'Extendable Arm', and 'Adjustable Angle'.

Detailed views of the product components are also provided. These include the phone holder with its 'Clamp Tighten Button' and 'Bottom Clamps', the adjustable 'Ball' joint, the 'Suction Cup' base, the clamp 'Wings', and the 'Extension Knob'. The 'Mount Body' and 'Lever' for securing the suction cup are also visible.

Specifications & Features

Specifications:

• Mount Body Dimensions: 6 cm x 10.5 cm with a 3.5 cm depth
• Adjustable Clamp Range: 5.5 cm to 9 cm
• Clamp Wings Expansion: Up to 10.5 cm
• Stand Height (Normal): 12 cm
• Stand Height (Extended): Up to 16 cm
• Suction Cup Diameter: 6.5 cm
• Phone Holder Feet Width: 3 cm

Features:

• Strong and secure suction cup for adhesion to any flat surface.
• Tight-fitting clamp with rubber grips for secure phone holding.
• Quick-use spring-loaded clamping mechanism.
• Extendable arm for optimal viewing angle adjustment.
• 360° rotating phone bracket for versatile positioning.
• Easy installation process.
• Sticky suction cup for enhanced grip.
• Suitable for attachment to windshields or dashboards.

How to Use

Constructing the Mount:

1. Unbox all components and verify contents.
2. Screw the joint part onto the back of the mount body, keeping it loosely attached.
3. Ensure the ball joint can be easily inserted into the socket.
4. Once the ball is in the socket, tighten the knob to secure it.
5. Remove the protective plastic peel from the suction cup.
6. Place the mount on the desired location on the dashboard or windshield.
7. Squeeze the clamp wings to expand the holder.
8. Insert the phone into the clamp and press it towards the back of the mount to close the clamps and secure the phone.
9. Pull down the lever on the bottom of the stand to ensure the suction is extra secure.
10. Use the two feet on the bottom to adjust the length for better phone fit, especially for larger phones.
11. Squeeze the wings again to release the phone.

Care and Safety

• Do not use this unit for any purpose other than its intended use.
• Keep the unit away from heat sources, direct sunlight, humidity, water, or any other liquids.
• Do not expose the device to extremely high or low temperatures, as this may damage the battery.
• Do not operate the unit if it has been wet or moist to prevent electric shock, injury, or damage to the unit.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Keep the unit out of reach of children.
• This unit is not a toy.

Battery Disposal:

This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures.