Anko Miniblocks Red Rose Pot Assembly Instructions

Step 1

Take one 8x8 plate and another 8x8 plate. Connect them as shown.

Step 2

Assemble two base units. Each unit uses four 1x5 bricks and four small cylindrical pieces, arranged as depicted.

Step 3

Attach one 1x5 brick to the structure from Step 2, following the indicated connection point.

Step 4: Building Pot Walls (Part 1)

Begin constructing the pot's walls. Use the provided pink bricks: four 1x2, two 1x4, and two 2x4 pieces. Assemble them onto the base structure as shown.

Sub-steps A, B, C, and D detail the precise placement of pink and grey components to form the initial layers of the pot.

Step 5: Building Pot Walls (Part 2)

Continue building the pot's walls. Use pink bricks: two 2x6, two 1x4, and two 1x2 bricks. Attach these pieces as indicated by the red arrows.

Sub-steps A, B, and C show the assembly of additional pink components.

Steps 6-7: Adding Layers

Add further layers to the pot structure using brown 1x8 and 1x6 bricks, along with pink 8x8 plates. Step 7 specifically shows attaching brown 2x6 and 1x8 bricks to a pink plate.

Step 8: Pot Base Detail

Construct a section of the pot's base. Use grey bricks: four 1x2, two 1x4, and two 1x2 pieces. Attach them as depicted.

Steps 9-10: Pot Base Assembly

Continue assembling the pot's base structure. Use grey and brown bricks as shown in the diagrams for steps 9 and 10, connecting them to form a solid foundation.

Step 11: Connecting Pot Sections

Attach the assembled base section (from steps 6-10) to the main pot structure. The diagram shows how the grey base connects to the larger grey body of the pot.

Step 12: Attaching Pink Curved Pieces

Attach pink curved pieces to the pot structure. Use four pink 2x4 curved pieces. Sub-steps A, B, C, and D illustrate the detailed assembly and placement of these decorative elements.

Step 13: Adding More Pink Details

Add more pink structural and decorative pieces. Use two pink 1x8 bricks and two pink 1x6 bricks. Assemble as shown. Sub-steps A, B, C, and D guide the attachment of these components.

Steps 14-15: Pot Top Assembly

Assemble the top section of the pot. Step 14 uses eight pink 1x2 bricks. Step 15 involves attaching pink 1x2, 1x4, and 1x8 bricks, with sub-steps A, B, and C showing detailed connections for the pot's rim.

Step 16: Placing Pot Inserts

Place three brown circular pieces onto the designated studs on the top of the pot structure.

Step 17: Assembling Plant Stem Base

Begin assembling the plant stem. Use green pieces: one tube, one 1x1 brick, two small green leaf-like pieces, and two small red flower pieces. Attach them together as shown.

Steps 18-21: Building the Main Stem

Construct the main stem of the rose plant. This involves connecting multiple green cylindrical segments and red 1x1 bricks. Steps 18-21 show the sequential assembly, including adding red leaf-like pieces to the stem.

Step 22: Stem Ready for Insertion

The fully assembled stem is shown, ready to be inserted into the pot.

Steps 23-25: Adding Decorations and Inserting Stem

Add small decorative elements to the pot. Step 23 adds green and orange pieces. Step 24 adds yellow/gold pieces. Step 25 shows inserting the assembled stem into the pot and adding more small green and orange decorative pieces around the base.

Steps 26-27: Further Stem Assembly

Continue assembling more stem segments using green and red pieces. Step 27 shows attaching green leaf pieces to the stem.

Step 28: Assembling Rose Bud Base

Begin assembling the base of the rose bud. Use red and green pieces as depicted.

Steps 29-31: Constructing Rose Bud

Build the rose bud structure. Step 29 uses red bricks. Step 30 assembles the yellow/gold core. Step 31 attaches red petal pieces to the rose bud base.

Step 32: Main Assembly View

A view showing the main assembly of the pot with the stem inserted.

Steps 33-34: Rose Base Assembly

Assemble the base for the rose flower. Step 33 shows a green steering wheel-like component. Step 34 involves attaching red pieces to this green base.

Steps 35-37: Rose Core and Petals

Assemble the main structure of the rose. Step 35 builds the base. Step 36 assembles the yellow/gold core. Step 37 attaches red petal pieces to the rose core.

Steps 38-39: Rose Petal Attachment

Attach green leaf-like pieces to the rose base (Step 38). Step 39 shows attaching more red petal pieces to the rose structure.

Step 40: Partially Assembled Rose

A view of the rose with some petals attached.

Steps 41-43: Rose Flower Base

Assemble the base components for the rose flower. Use green circular pieces and a green rod. Step 41 shows initial green pieces. Step 42 inserts a green rod. Step 43 adds more green circular pieces.

Steps 44-47: Rose Flower Structure

Continue building the rose flower. Step 44 attaches red pieces. Step 45 builds more structure. Step 46 assembles the yellow/gold core. Step 47 attaches red petal pieces to the core.

Steps 48-50: Final Petal Attachment

Attach the remaining red petal pieces to the rose flower. Step 48, 49, and 50 show the sequential attachment of these final red components, along with green leaf-like pieces.

Step 51: Final Assembly

The final step shows the completed Red Rose Pot model, with the fully assembled rose attached to the stem and pot.