Manuals+

Anko Miniblocks Monster Truck Instructions

Product Overview

This document provides detailed, step-by-step assembly instructions for the Anko Miniblocks Monster Truck.

Brand: Anko

Product Line: Miniblocks

Model: Monster Truck

Piece Count: 259

Recommended Age: 6+ years

Vehicle Series

Difficulty Level: Moderate

Product Codes: K: 43-539-697 | T: 71-016-627

Step 1

Parts Required:

Connect the two yellow connector pieces to the two grey angled connector pieces.

Step 2

Parts Required:

Assemble these bricks to form the base structure of the truck.

Step 3

Parts Required:

Attach the two grey connector pieces to the black flat plate. Then, attach the two grey angled connector pieces to the structure.

Step 4

Parts Required:

Connect the grey connector piece to the ends of the two long wooden-colored rods.

Step 5

Parts Required:

Assemble the blue connector pieces, orange cylinder, blue cylinder, and orange rods into a sub-assembly.

Step 6

Parts Required:

Connect the three black connector pieces together in a line.

Step 7

Parts Required:

Assemble the blue connector pieces, orange cylinder, blue cylinder, and orange rods into a sub-assembly. This appears to be a repeat of Step 5's parts, but the assembly diagram shows connection to the existing structure.

Step 8

Parts Required:

Connect the sub-assembly created in Step 7 to the main truck chassis.

Step 9

Parts Required:

Attach the two black 1x8 beams to the main structure. Then, attach the four black 2x2 bricks with side studs to the beams.

Step 10

Parts Required:

Attach these pieces to the main structure of the truck.

Step 11

Parts Required:

Assemble these bricks onto the black 4x10 plate to create a new component.

Step 12

Parts Required:

Add these various black and orange bricks to the main structure of the truck.

Step 13

Parts Required:

Assemble the wheel, base piece, and triangular piece. Attach this assembly to the main structure.

Step 14

Parts Required:

Attach these grey decorative pieces to the sides of the truck body.

Step 15

Parts Required:

Attach the red and orange plates to the top of the truck body. Apply the decorative tiger claw pieces to the sides of the truck.

Step 16

Parts Required:

Add these black and grey pieces to form the interior structure of the truck.

Step 17

Parts Required:

Assemble a sub-assembly using these parts.

Step 18

Parts Required:

Attach these orange plates and bricks to the sides of the truck's body.

Step 19

Parts Required:

Attach these black and orange pieces to the truck body, building up the sides.

Step 20

Parts Required:

Attach the orange pieces, including the decorative tiger claw elements, to the front of the truck to form the hood and grille area.

Step 21

Parts Required:

Attach these black pieces to the rear section of the truck chassis.

Step 22

Parts Required:

Attach the black 2x4 plate to the top of the truck's cabin. Place the six black bricks with 'RACING' decals onto the plate.

Step 23

Parts Required:

Attach these orange and black pieces to the front hood section of the truck.

Step 24

Parts Required:

Attach these orange and black pieces to the sides of the truck's cabin area.

Step 25

Parts Required:

Attach the transparent grey windshield piece and the black bricks to the front of the truck.

Step 26

Parts Required:

Attach these black pieces and decorative elements to the top of the truck's cabin.

Step 27

Parts Required:

Assemble a sub-assembly using these parts, which will likely form part of the engine or suspension.

Step 28

Parts Required:

Connect the three black connector pieces together.

Step 29

Parts Required:

Assemble these grey rod and connector pieces into a sub-assembly.

Step 30

Parts Required:

Assemble the wheels: attach the red wheel rims to the black tires. Then, attach these wheel assemblies to the truck chassis using the wooden rod and black cylinder pieces.

Step 31

Parts Required:

Assemble a sub-assembly with these parts.

Step 32

Parts Required:

Assemble these black and orange connector pieces.

Step 33

Parts Required:

Assemble these connector pieces into a Y-shaped configuration.

Step 34

Parts Required:

Assemble these black connector pieces.

Step 35

Parts Required:

Connect the sub-assembly created in Step 34 to the main structure.

Step 36

Parts Required:

Assemble a sub-assembly using these parts.

Step 37

Parts Required:

Assemble these black connector and cylinder pieces.

Step 38

Parts Required:

Assemble these black connector and cylinder pieces.

Step 39

Parts Required:

Connect the sub-assembly created in Step 38 to the main structure.

Step 40

Parts Required:

Assemble the wheels: attach the red wheel rims to the black tires. Then, attach these wheel assemblies to the truck chassis using the wooden rod and black cylinder pieces. This is for the rear wheels.

Step 41

Parts Required:

Connect the front and rear wheel assemblies to the main truck chassis to complete the vehicle.

Step 42

Parts Required:

Insert the wooden rod piece into the front suspension mechanism.

Models: 43-539-697, 71-016-627, IM 43539697 Mini Blocks Monster Truck, IM 43539697, Mini Blocks Monster Truck, Blocks Monster Truck, Monster Truck

PDF preview unavailable. Download the PDF instead.

43539697 Manual ?srsltid=AfmBOoqu5GHts3nijPDYeb Q2TsuMkIjLLGy0JzkdS-Oz MhG4sGIVfL Adobe PDF library 15.00 Adobe Illustrator CC 22.0 (Windows)

Related Documents

Preview Anko Miniblocks Cavalier in Tea Cup Instructions
Step-by-step assembly instructions for the Anko Miniblocks Cavalier in Tea Cup set, featuring 1062 pieces and suitable for ages 8 and up. This guide details the construction of the Animal Series model.
Preview Anko Miniblocks Pink Carnation Pot Assembly Instructions
Detailed step-by-step assembly guide for the Anko Miniblocks Pink Carnation Pot, a 405-piece building block set. Learn how to construct this floral display with clear instructions and part lists.
Preview Anko Miniblocks Coffee Machine Set Assembly Instructions
Detailed assembly guide for the Anko Miniblocks Coffee Machine Set, featuring step-by-step instructions and part identification for building a replica coffee machine.
Preview Anko Miniblocks Coffee Machine Set Instructions
Detailed assembly instructions for the Anko Miniblocks Coffee Machine Set, featuring 671 pieces and recommended for ages 8 and up. This guide provides step-by-step visual and textual instructions for building the coffee machine and grinder.
Preview Anko Miniblocks Telephone With Flowers: Assembly Instructions & Guide (43-541-973)
Step-by-step assembly guide for the Anko Miniblocks Telephone With Flowers building set (Model 43-541-973). Features 213 pieces and is suitable for ages 6 and up. Includes safety warnings for small parts.
Preview Anko Miniblocks Red Rose Pot: Assembly Instructions | 43-541-904
Step-by-step assembly instructions for the Anko Miniblocks Red Rose Pot (347 pieces). Learn how to build this detailed floral model. Includes warnings and age recommendations.
Preview Anko 120 Piece Construction Blocks Set for Kids
Anko 120 Piece Construction Blocks Set. A versatile building toy for children aged 3+, encouraging creativity, imagination, and fine motor skills with a variety of colorful blocks and connectors.
Preview Anko Miniblocks Sunflower Pot Assembly Instructions
Step-by-step guide to assembling the Anko Miniblocks Sunflower Pot, featuring 359 pieces. Suitable for ages 8 and up. Includes detailed instructions for building the pot, stem, leaves, and sunflower head.