Anko Miniblocks Retro Camera Instructions

Assembly Steps

Follow the numbered steps below to assemble your Retro Camera.

Step 1.1 & 1.2: Begin by assembling the base of the camera body using the pieces indicated in bags 1.1 and 1.2. The initial structure involves attaching several 1x8 and 1x3 blocks to form a rectangular base.

Step 2: Continue building the camera body by adding more blocks, following the specific placement shown in the diagram.

Step 3: Attach a 1x8 block and two 1x6 blocks to the existing structure.

Step 4: Add four 1x8 blocks and two 1x6 blocks to extend the camera body.

Step 5: Attach a 2x16 block to the top of the structure.

Step 6: Add five 1x8 blocks, four 1x6 blocks, and two 1x4 blocks to build up the camera's internal structure.

Step 7: Attach a 1x6 block, two 1x4 blocks, and four 1x2 blocks.

Step 8: Add a 1x8 block to the structure.

Step 9: Attach a 1x6 block, a 1x8 block, and a 1x1 block.

Step 10: Add a 1x12 block, two 1x6 blocks, and two 1x2 blocks.

Step 11: Attach a 2x16 block.

Step 12: Add a 1x8 block, a 1x1 block, and another 1x1 block.

Step 13: Attach two 1x6 blocks and four 1x4 blocks.

Step 14: Add a 1x6 block, two 1x4 blocks, and four 1x2 blocks.

Step 15: Attach a 1x8 block, a 1x1 block, and a 1x1 block.

Step 16: Add a 1x8 block, a 1x1 block, and a 1x1 block.

Step 17: Attach four 1x6 blocks and two 1x2 blocks.

Step 18: Add a 2x16 block.

Step 19: Assemble a base plate using a 6x8 block, two 1x8 blocks, and a 1x1 block.

Step 20: Attach three 1x4 blocks and two 1x2 blocks. Note: some pieces are transparent.

Step 21: Add a 1x8 block and four 1x4 blocks.

Step 22: Continue building the camera body with the indicated blocks.

Step 23: Assemble a base using a 6x8 block and two 1x8 blocks.

Step 24: Attach three 2x4 blocks, one 1x2 block, and two 1x1 blocks.

Step 25: Add a 1x8 block and four 1x1 blocks.

Step 26: Continue assembling the camera body, incorporating printed or sticker elements that resemble a digital display.

Step 27: Attach four 1x2 blocks, one 1x1 block, and one 1x1 block.

Step 28: Connect two 4x4 plates.

Step 29: Add a 1x4 block and a 1x4 block.

Step 30: Continue building the camera body.

Step 31: Attach two 2x8 blocks.

Step 32: Add two 2x6 blocks, two 1x2 blocks, and two 1x1 blocks.

Step 33: Attach a 1x12 block.

Step 34: Add four 1x4 blocks, one 1x1 block, one 1x2 block, and one 1x1 block.

Step 35: Assemble a base using a 6x6 block, a 1x6 block, and a 1x1 block.

Step 36: Attach four 1x8 blocks, a 2x10 block, and a 1x8 block.

Step 37: Add one 1x4 block, one 1x3 block, and one 1x2 block.

Step 38: Attach one 1x4 block, one 1x3 block, and one 1x2 block.

Step 39: Add four 1x4 blocks, one 1x2 block, and one 1x1 block.

Step 40: Attach one 1x6 block, one 1x3 block, one 1x2 block, and one 1x1 block.

Step 41: Add one 1x4 block, two 1x3 blocks, and two 1x2 blocks.

Step 42: Attach one 1x6 block, one 1x3 block, and one 1x2 block.

Step 43: Add two 1x6 blocks and one 1x1 block.

Step 44: Attach two 1x6 blocks, two 2x6 blocks, and two 1x2 blocks.

Step 45: Add two 2x8 blocks and one 1x8 block.

Step 46: Attach one 1x6 block, one 1x1 block, and one 1x1 block.

Step 47: Add three 1x2 blocks, one 1x1 block, and one 1x1 block.

Step 48: Attach one 1x4 block, three 1x2 blocks, and two 1x1 blocks.

Step 49: Add two 1x4 blocks.

Step 50: Attach one 1x4 block, one 1x2 block, and two 1x1 blocks.

Step 51: Add one 1x4 block, one 1x2 block, and two 1x1 blocks.

Step 52: Continue assembling the camera's internal components.

Step 53: Attach one 1x4 block and one 1x4 block.

Step 54: Add one 1x4 block, one 1x1 block, and one 1x1 block.

Step 55: Attach a 1x6 plate.

Step 56: Assemble a component using the indicated blocks.

Step 57: Add one 1x4 block and one 1x4 block.

Step 58: Attach one 1x2 block, one 1x1 block, and one 1x1 block.

Step 59: Add a 1x6 plate.

Step 60: Continue assembling the camera body.

Step 61: Attach a 2x8 block, one 1x1 block, and one 1x1 block.

Step 62: Add one 1x4 block, one 1x1 block, and four 1x1 blocks.

Step 63: Continue building the camera body.

Step 64: Attach one 2x6 block, one 1x3 block, and two 1x1 blocks.

Step 65: Add one 1x2 block, three 1x1 blocks, and one 1x2 block. Note: some pieces are transparent.

Step 66: Attach two 2x2 blocks, one 1x2 block, and one 1x1 block.

Step 67: Add two 1x4 blocks, one 1x1 block, and one 1x1 block.

Step 68: Attach two 1x2 blocks and one 1x1 block.

Step 69: Add one 1x4 block, one 1x1 block, and one 1x1 block.

Step 70: Attach one 1x4 block, one 1x1 block, and two 1x1 blocks.

Step 71: Add one 1x4 block, two 1x6 blocks, and six 1x1 blocks.

Step 72: Attach one 1x4 block, four 1x1 blocks, and two 1x2 blocks.

Step 73: Add one 1x3 block, one 1x1 block, one 1x1 block, and one 1x1 block.

Step 74: Attach one 1x4 block, one 1x1 block, and one 1x1 block.

Step 75: Add three 1x1 blocks, six 1x1 blocks, and one 1x1 block.

Step 76: Attach one 2x6 block and one 1x1 block.

Step 77: Add one 1x6 block and one 2x2 block.

Step 78: Attach one 1x6 block, two 1x1 blocks, and one 1x1 block.

Step 79: Add one 2x6 block and six 1x1 blocks.

Step 80: Attach one 1x8 block, one 1x1 block, and one 1x1 block.

Step 81: Add one 1x6 block, one 1x1 block, and two 1x1 blocks.

Step 82: Attach one 1x8 block and two 1x2 blocks.

Step 83: Continue assembling the camera body.

Step 84: The main camera body is now assembled.

Step 85: Add one 1x3 block, one 1x1 block, one 1x1 block, and one 1x1 block.

Step 86: Attach one 1x4 block, one 1x1 block, and one 1x1 block.

Step 87: Add three 1x1 blocks, six 1x1 blocks, and one 1x1 block.

Step 88: Attach one 2x6 block and one 1x1 block.

Step 89: Add one 1x6 block and one 2x2 block.

Step 90: Attach one 1x6 block, two 1x1 blocks, and one 1x1 block.

Step 91: Add one 2x6 block and six 1x1 blocks.

Step 92: Attach one 1x6 block, one 1x1 block, and one 1x1 block.

Step 93: Add one 1x4 block, one 1x1 block, and two 1x1 blocks.

Step 94: Attach one 1x8 block and two 1x2 blocks.

Step 95: Continue assembling the camera body.

Step 96: Add one 1x4 block, one 1x1 block, and one 1x1 block.

Step 97: Attach one 1x4 block, one 1x1 block, and one 1x1 block.

Step 98: Assemble the top part of the camera.

Step 99: Attach a 1x4 block and transparent pieces.

Step 100: Assemble the top section of the camera.

Step 101: Add a circular piece.

Step 102: Attach a component with a lever.

Step 103: Add a transparent piece.

Step 104: Attach a circular component.

Step 105: Assemble the lens components.

Step 106: Attach the assembled lens to the camera body.

Product Information

This Anko Miniblocks Retro Camera set allows you to build a detailed replica of a vintage camera. The set includes 405 pieces and is recommended for ages 8 and up. The assembly process is broken down into 106 steps, with clear visual guidance provided for each stage.

The finished model features realistic details such as a lens, viewfinder, and control dials, mimicking the appearance of a classic SLR camera. The "Appliance Series" designation suggests it is part of a collection of buildable household items.

Warning: Contains small parts, choking hazard. Not suitable for children under 3 years. Adult assistance is recommended.