BIXOLON SPP-C200/C300 Mobile Printer

Manual Information

This Bluetooth Connection Manual provides information on the connection of Bluetooth-enabled iOS or Android Host devices with the printer. BIXOLON maintains ongoing efforts to enhance and upgrade the functions and quality of all its products. Product specifications and/or user manual content may be changed without prior notice.

Precautions

1. To connect the printer with another device via Bluetooth, the devices must be within 10m of one another. The connection is broken if the distance between devices exceeds 10m.
2. The maximum separating distance may be shortened if transmission obstacles, such as cement walls, are present.
3. If a device (such as a microwave oven, wireless LAN, etc.) that uses the same frequency is present, transmission may be interrupted. Separate the printer and Bluetooth-enabled device from such interrupting devices by a distance of at least 5m.

Bluetooth Information Print

A BIXOLON SPP-C200/C300 mobile printer is shown. It features a paper output slot at the top. On the front panel, there are indicator lights labeled ERROR, BATT, and STATUS. Below these lights are two buttons: the [Power button] and the [Feed button].

To print Bluetooth information:

1. Turn the printer power off and close the printer paper cover.
2. Press and hold both the [Feed button] and [Power button] simultaneously to turn on the printer.
3. Release the two buttons after the Self-Test printing begins.

Bluetooth Connection Instructions

This manual focuses on the use of iOS and Android Host devices. For other Host devices, please refer to the relevant Host device manual.

4-1 iOS Mode

1. Select the [Settings icon].
2. Select "Bluetooth".
3. Select the printer to connect.
4. Bluetooth communication is available.

4-2 Android Mode

1. Select the [Settings icon].
2. Select "Bluetooth".
3. Select the printer to connect.
4. Bluetooth communication is available.

Troubleshooting

If Bluetooth is not searched on an iOS device, follow the guide below:

• Check whether the printer is connected to another Bluetooth device. The printer may not be found on your iOS device if it is connected to another Bluetooth device.

Check the printer's STATUS LED:

• STATUS LED on: Indicates the printer is not connected to other devices via Bluetooth.
• STATUS LED blinks: Indicates the printer is connected to another device via Bluetooth.

You may need to disconnect the connection to another Bluetooth device or turn the printer off and on again.

[Information] Printer is automatically connected to the last iOS device which was connected.

Revision History