BIXOLON SPP-C200 Mobile POS Printer Installation Guide
This guide provides comprehensive instructions for installing and setting up your BIXOLON SPP-C200 mobile printer. Please read through this document carefully before proceeding with the installation.
Package Contents
Upon opening the box, please verify that you have received all the following items:
- BIXOLON SPP-C200 Printer
- Power Adapter
- Power Cable
- USB Cable
- Quick Start Guide
- Warranty Card
Diagram Description: An illustration displays all included components neatly arranged, allowing for easy visual confirmation of the package contents.
Safety Precautions ⚠️
To ensure safe operation and prevent damage to the printer or yourself, please adhere to the following safety guidelines:
- Only use the provided power adapter and cable.
- Do not expose the printer to water, moisture, or extreme temperatures.
- Avoid placing the printer in direct sunlight or near heat sources.
- Do not attempt to disassemble or repair the printer yourself. Contact authorized service personnel.
- Ensure proper ventilation around the printer.
System Requirements
The BIXOLON SPP-C200 is compatible with various operating systems and devices. Ensure your system meets the following requirements:
- Operating Systems: Windows, Android, iOS
- Connectivity: USB, Bluetooth, Wi-Fi (model dependent)
- Available Ports: USB port for initial setup or direct connection.
Installation Steps
Hardware Installation
Follow these steps to connect the physical components of your printer:
- Connect the power adapter to the printer's power port.
- Connect the other end of the power adapter to a wall outlet.
- Connect the USB cable from the printer to your computer or host device.
Diagram Description: An illustration shows the power adapter being plugged into the rear of the SPP-C200 printer and then into a standard electrical socket.
Diagram Description: A visual guide demonstrates how to securely connect the USB cable to the printer's USB port and the corresponding port on a computer.
Software/Driver Installation
To enable communication between your device and the printer, you need to install the appropriate drivers.
- Download Drivers: Visit the official BIXOLON website ([https://www.bixolon.com/](https://www.bixolon.com/)) to download the latest drivers and utility software for your operating system.
- Run Installer: Locate the downloaded file and run the installer.
- Follow Prompts: Follow the on-screen instructions to complete the driver installation. Ensure the printer is connected and powered on when prompted by the installer.
Diagram Description: A screenshot depicts the initial screen of the BIXOLON driver installation wizard, indicating the start of the software setup process.
Connecting the Printer
USB Connection
Connect the printer directly to your computer or POS terminal using the provided USB cable. The operating system should detect the printer, and the installed drivers will enable communication.
Bluetooth Connection ?
For wireless connectivity, pair the printer with your Bluetooth-enabled device:
- Ensure Bluetooth is enabled on your host device (e.g., tablet, smartphone, PC).
- Turn on the printer.
- Press and hold the Feed button for 3 seconds to enter pairing mode. The Bluetooth indicator light will flash.
- On your host device, search for available Bluetooth devices and select "SPP-C200" (or similar) from the list.
- Enter the default PIN code if prompted (usually "0000" or "1234").
- The Bluetooth indicator light will become solid once successfully paired.
Wi-Fi Connection ?
If your model supports Wi-Fi, follow these steps to connect to your wireless network:
- Ensure your Wi-Fi network is active and you have the network name (SSID) and password.
- Turn on the printer.
- Use the printer's utility software or a specific configuration method (refer to advanced manual if needed) to connect to your Wi-Fi network. This often involves temporarily connecting via USB or using a configuration tool.
- The Wi-Fi indicator light will confirm a successful connection.
Basic Operation
Loading Paper ?️
Proper paper loading is essential for reliable printing:
- Open the printer cover by lifting the top lid.
- Insert the paper roll, ensuring the paper unwinds from the bottom of the roll and feeds towards the front.
- Close the cover firmly until it clicks.
- Press the Feed button to advance the paper and check the alignment.
Diagram Description: A clear illustration shows the correct orientation for placing a thermal paper roll inside the printer, with the paper edge positioned to feed correctly.
Printing a Test Page ▶️
Printing a test page helps verify the printer's functionality and connection:
- Ensure the printer is powered on and paper is loaded.
- Press and hold the Feed button for approximately 2 seconds.
- The printer will automatically feed a short length of paper and print a self-test page containing configuration information.
Troubleshooting ❓
Here are solutions to common issues you might encounter:
| Problem | Possible Cause | Solution |
|---|---|---|
| Printer not printing | No power or incorrect power connection. | Check that the power adapter is securely connected to both the printer and the wall outlet. Ensure the power switch is on. |
| Paper jam | Paper is not loaded correctly or is torn. | Open the printer cover, carefully remove any jammed paper, and reload the paper roll correctly. Ensure the paper edge is aligned. |
| Connection error (USB/Bluetooth/Wi-Fi) | Loose cable, incorrect pairing, or network issues. | Verify all cable connections are secure. For Bluetooth, re-pair the device. For Wi-Fi, check network settings and ensure the printer is within range. Restart the printer and host device. |
| Poor print quality | Dirty print head or low-quality paper. | Clean the print head using a recommended cleaning pen or solution. Try using a different roll of thermal paper. |
Specifications
Key technical specifications for the BIXOLON SPP-C200 printer:
| Parameter | Value |
|---|---|
| Print Method | Direct Thermal Receipt |
| Print Speed | Up to 100 mm/sec |
| Resolution | 203 dpi (8 dots/mm) |
| Interface | USB, Bluetooth, Wi-Fi (Optional) |
| Paper Width | 58 mm or 80 mm (depending on model/configuration) |
| Paper Diameter | Up to 50 mm |
| Emulation | BXL / ESC / POS |
| Dimensions (W x D x H) | Approx. 100 x 132 x 110 mm |
| Weight | Approx. 450g (without paper roll) |
