Model: VV1-6C-AU

[Image: A diagram of the VEVOR Hydroponic Tower. It features a central water reservoir at the base, with multiple stacked, cup-shaped growing modules forming a vertical tower. A pump is visible inside the reservoir, connected to tubing that runs up through the tower. The model number VV1-6C-AU is displayed.]

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us via Technical Support and E-Warranty Certificate at www.vevor.com/support.

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

Instructions

Thank you very much for choosing this product. Please read all the instructions before using it. The information will help you achieve the best possible results.

PLEASE NOTE! Drawings in this manual are for illustration purposes only and in some details may differ from the actual product.

ATTENTION! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in serious injury or even death. The device or product used in the warning instructions is referred to pet bunk bed. Please place in a position that children cannot climb or move, so that the product does not fall over and injure children.

Usage Safety

1. Select an area for assembly that is clean and free of any debris that might cause persons working on the assembly to trip.
2. Do not lift heavy parts or assemblies. Use crane, jack, tackle, fork trucks or other mechanical devices.
3. Preview the assembly instructions in your operator's manual before proceeding further.
4. After completing assembly, thoroughly inspect the machine to be sure that all nuts, bolts or any other fastener assemblies have been thoroughly tightened.
5. This product is not a toy or a washing vessel and should not be used for any purpose other than a shampooer.
6. The drainage pipe of the product, please use the clamp firmly connected to avoid water leakage. The other end of the drain pipe should be placed in the household drain sink or drain pipe, and remember that the end accessories of the drain pipe should not be placed with electrify things to avoid electric shock.
7. Avoid to use any hard objects or any chemicals which can dissolve plastic to clean the basin.
8. Please put the product in a flat place for use. When using the product on sloping or uneven ground, there is a risk of rollover during use.

SAVE THESE INSTRUCTIONS

Technical Parameters

Part & Hardware List -- Hydroponic Tower

Assembly -- Hydroponic Tower

Figure 1: Water Storage Tank Base Assembly

[Image Description: Shows the bottom of the water storage tank (B*1). Four foot pads (A*4) are being installed onto the designated points at the outer bottom edge of the tank.]

Figure 2: Pump and Hose Connection

[Image Description: Illustrates connecting the pump (L*1) and hose (N*1). Step 1: Insert one end of the hose (N*1) into the outlet nozzle of the pump (L*1) and attach the pump to the bottom of the water storage tank. Step 2: Place the female connector of the pump under the water storage drum lid (C*1) and secure it with the retainer coil (M*1) to prevent it from falling. Step 3: Place the lid (C*1) onto the tank and route the hose (N*1) out of the designated hole for use.]

Figure 3: Staggering Water Towers

[Image Description: Depicts six water tower sections (E*6) being staggered at a 36-degree angle relative to each other. It suggests installing two sections together initially to facilitate subsequent steps.]

Figure 4: Initial Tower Installation

[Image Description: Shows the first step of passing the hose (N*1) through the central opening of the water tower sections. The second step involves installing two assembled water tower sections onto the cover of the water storage tank (C*1).]

Figure 5: Continuing Tower Assembly

[Image Description: Illustrates passing the hose through the already assembled water towers. The water towers are then staggered at a 36-degree angle to the tower below. The remaining group of water towers is installed in turn.]

Figure 6: Top Link Body Connection

[Image Description: Shows connecting the hose (N*1) to the inlet mouth of the top link body (I*1). A clamp (G*1) is used to secure this connection. The top link body (I*1) is then assembled onto the water tower structure.]

Figure 7: Electrical Connections

[Image Description: Depicts connecting the adapter (J*1), the smart switch (K*1), and the female port of the water pump (L*1) together as shown in the diagram.]

Figure 8: Filling and Balancing

[Image Description: Shows the water storage bucket being filled with a 20-liter nutrition solution using a folding funnel (S*1). The water inlet nozzle (D*1) is covered. The intelligent switch is inserted into the power supply. The base feet are adjusted to achieve a 90-degree balance, ensuring nutrient solution flows through each layer of the water tower.]

Figure 9: Pump Maintenance

[Image Description: Illustrates pump maintenance. A flat-head screwdriver (Q*1) is used to pry open the front cover of the pump. The old pump filter cotton (R*4) is removed and replaced with a new one. The top cover is then reattached.]

Operation Method

1. Before installation, check the accessories according to the accessories list for any omissions or damage. Ensure the water pump, smart switch, and adapter can be used normally, the water storage bucket is not broken, and the water tower outlet is not blocked.
2. The hydroponic tower should be installed on a flat and hard ground.
3. Planting should ensure that the number of plants in each layer is consistent and even (it is recommended that there are 5 plants in a layer). Otherwise, it may cause deformation of the water tower due to long-term uneven stress. It is necessary to check and adjust regularly to ensure that the force is even in a circle.
4. Check and adjust the water level in the tank weekly.
5. Add nutrients weekly.
6. Your hydroponic tower requires continuous power and water replenishment weekly.
7. Adjust the frequency of using the water pump according to the season and local environment.

Troubleshooting & Maintenance

Reminder

Intelligent switch connection, please refer to the intelligent switch built-in manual to perform.

Correct Disposal

This product is subject to the provision of European Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

Manufacturer & Representatives

Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

EC REP: E-CrossStu GmbH.
Address: Mainzer Landstr.69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.
Address: C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD.
Address: 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd.
Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730