Onn. 2.1 Soundbar S3237
Model: S3237
Introduction
This document provides instructions for setting up and operating the Onn. 2.1 Soundbar S3237. It covers features, connections, remote control functions, and troubleshooting.
Package Contents
Ensure all the following items are included in your package:
- Onn. 2.1 Soundbar
- Remote Control
- Power Adapter
- Audio Cables (e.g., 3.5mm to 3.5mm, RCA to 3.5mm)
- User Manual
Product Overview
The Onn. 2.1 Soundbar features a sleek design and delivers enhanced audio for your entertainment system. It includes multiple input options for versatile connectivity.
Connections
Connect your audio sources to the soundbar using the appropriate cables:
- Optical Input: Connect to a TV or audio device with an optical output using an optical cable.
- AUX Input: Connect to a device with a 3.5mm audio output using a 3.5mm to 3.5mm cable.
- RCA Input: Connect to a device with RCA audio outputs using RCA cables.
- Bluetooth: Pair your Bluetooth-enabled device wirelessly.
Remote Control
The remote control allows you to manage the soundbar's functions:
- Power Button: Turns the soundbar on or off.
- Volume Up/Down: Adjusts the audio volume.
- Input Select: Cycles through available audio inputs (Optical, AUX, RCA, Bluetooth).
- Mute: Silences the audio output.
- EQ Modes: Select preset equalizer settings (e.g., Movie, Music, News).
- Bass/Treble: Adjusts bass and treble levels.
Operation
- Connect the power adapter to the soundbar and plug it into a power outlet.
- Turn on the soundbar using the power button on the unit or the remote control.
- Select the desired input source using the remote control or the input button on the soundbar.
- If using Bluetooth, ensure the soundbar is in Bluetooth mode and pair your device.
- Adjust the volume and sound settings as needed.
Troubleshooting
Refer to the following table for common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound | Volume is too low or muted. | Increase volume or unmute. |
| No sound | Incorrect input source selected. | Select the correct input source. |
| No sound | Audio cables are not connected properly. | Check all cable connections. |
| Bluetooth connection issues | Device is not in pairing mode. | Ensure the soundbar is in Bluetooth pairing mode. |
| Bluetooth connection issues | Device is too far from the soundbar. | Move the device closer to the soundbar. |
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
