onn. 32" 2.0 Soundbar Quick Start Guide

What's in the Box?

• 1. Soundbar
• 2. Remote control
• 3. AAA batteries
• 4. Power cable
• 5. HDMI cable
• 6. Wall mounting kit
• 7. Wall mounting template
• 8. Quick Start Guide

Get to Know Your 32" 2.0 Soundbar

Front Panel:

• 1. Status indicator
• 2. Wall mount point
• 3. HDMI (ARC) port
• 4. Aux in port
• 5. USB port
• 6. Optical port
• 7. Power port

Back Panel Controls:

• 8. Power on/off button
• 9. Source button
• 10. Volume up button
• 11. Volume down button

LED Indicator Status:

• Red: Standby mode
• Green: Optical source
• White: Aux in source
• Blue: Bluetooth mode
• Yellow: HDMI mode
• Purple: USB Source

Setup Instructions

Step 1: Insert Batteries

For the remote control, do not mix old and new batteries, and do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cad, Ni-MH, etc.) batteries.

[Diagram: Battery insertion into remote control]

Step 2: Connect to Power

Use the included power cable to connect your 32" 2.0 Soundbar to a wall outlet.

TIP: Place your 32" 2.0 Soundbar at the front edge of your TV stand for the best sound experience.

[Diagram: Power cable connected to soundbar and wall outlet]

Step 3: Connect to Your TV

Connect your 32" 2.0 Soundbar to the HDMI port on your TV labeled "ARC" with the included HDMI cable.

If your TV does not have an HDMI ARC jack, you can connect your TV to the soundbar using other connections such as Optical, Bluetooth, Aux, or USB.

If your TV does not have an HDMI ARC port, use the included optical cable along with the HDMI cable to connect.

[Diagram: HDMI ARC connection between TV and soundbar]

Step 4: Select Input

Use the remote that came with your TV to select the HDMI input (source) you used to connect your 32" 2.0 Soundbar.

[Diagram: TV input selection menu showing HDMI input]

Setting Up with Roku TV

If you have a Roku TV:

Simply use the remote that came with your Roku TV and follow steps 2 and 3. The rest is automatic, including linking your Roku account.

To read the Privacy Policy & Terms of Use, press the '*' button on your Roku TV remote.

Follow the on-screen instructions on your TV to set up your 32" 2.0 Soundbar.

For All Other TVs

You may need to enable your TV's HDMI-CEC and ARC settings.

Hints and Tips

LED Indicator Status:

• When the LED indicator is flashing, the Bluetooth is in disconnected status.
• When the LED indicator is solid, the Bluetooth is connected.

Automatic Standby: The Soundbar will automatically switch to standby mode when no audio input is received for over 20 minutes. It will wake up automatically with any source input again.

Troubleshooting:

If the unit doesn't function correctly, unplug it, wait 30 seconds, and plug it back in.

Wall Mounting Instructions

Model: 100056522

Tools needed (not included): Pencil, Screwdriver, Drill (optional for pilot holes).

Included: Wall Mounting Template, Screws (47 x 4mm), Screw Brackets (40 x 8mm).

Step 1: Prepare the Wall

Place the included wall mounting template against the wall at the desired location. Mark the two bracket holes using a pencil.

[Diagram: Wall mounting template placed on wall, pencil marking holes]

Step 2: Attach Brackets to Wall

Insert the screws into the plastic brackets. Fasten the screws and screw brackets securely to the wall on the marked bracket holes.

Screw Size: 47mm x 4mm (1.85" x 0.157")

Screw Bracket Size: 40mm x 8mm (1.575" x 0.315")

[Diagram: Screws inserted into brackets, brackets mounted on wall]

Step 3: Hang the Soundbar

Carefully hang the soundbar onto the mounted screws/brackets.

[Diagram: Soundbar being hung on wall-mounted brackets]

Dimensions for template: 668.7mm (26.327 inches) between bracket holes.

Legal & Compliance

FCC Compliance:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Statement: To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Important Safety Instructions:

1. Read all safety and operating instructions before operating the product.
2. Keep these instructions for future reference.
3. Heed all warnings on the appliance and in the operating instructions.
4. Follow all operating and use instructions.
5. Do not use this apparatus near water or moisture (e.g., in a wet basement or near a swimming pool).
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources (radiators, heat registers, stoves, amplifiers, etc.).
9. Do not defeat the safety purpose of polarized or grounding plugs. If the provided plug does not fit your outlet, consult an electrician.
10. Protect the power cord from being walked on or pinched, especially at the plugs and where it exits the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. Use caution when moving cart/apparatus combinations to avoid tip-over injuries.
13. Unplug the apparatus during lightning storms or when unused for long periods.
14. Refer all servicing to qualified personnel. Servicing is required if the apparatus is damaged (e.g., power cord, liquid spilled, objects fallen, exposed to rain/moisture, does not operate normally, or has been dropped).
15. Do not install in a confined space (e.g., bookcase) without adequate ventilation. Do not impede ventilation by covering openings with items like newspaper or curtains.
16. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place liquid-filled objects (like vases) on the apparatus.
17. WARNING: The mains plug is used as a disconnect device; it shall remain readily operable.
18. This equipment is a Class II or double-insulated electrical appliance and does not require a safety connection to electrical earth.
19. CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN.
20. The equipment shall be used at a maximum ambient temperature of 35°C.
21. WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
22. Batteries should not be exposed to excessive heat (sunshine, fire, etc.).
23. WARNING: Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.
24. Keep new and used batteries away from children.
25. If the battery compartment does not close securely, stop using the product and keep it away from children.
26. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Trademarks:

Roku TV Ready and the Roku TV Ready logo are trademarks of Roku, Inc.

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Additional Information

Manufacturer: F&D (Shenzhen Fenda Technology Co., Ltd.)

Customer Name: Walmart

Document Version: A/0

Date: June 02, 2021 (Page 1), June 18, 2021 (Page 2)

Order Number: GM2100405

Company Model: SB2128

Part Number: 12.005.0004.05142 (Page 1), 12.005.0004.05141 (Page 2)

Customer Model: 100056522

Product Name: Instruction Manual / Wall Mounting Schematic Card

Packaging Designer: Ma Ye

Graphic Designer: Li Ying

Project Manager: Tu Minghui

Business: He Shuaifang

Compliance: Chen Zhonghua

Structure Engineer: Yang Dajun

Electrical/Software: Yang Hong

Acoustic Engineer:

Material Specifications:

• Tolerance: 0-50mm: -0.2/+0.3mm; 50-150mm: -0.5/+1mm; >150mm: -1/+1.5mm.
• All materials must meet RoHS 2.0, Reach environmental, and WEEE recycling requirements.
• All sticker materials must meet Fenda reliability test standards (60°C high temp, -20°C low temp, 93% humidity for 24 hours), requiring labels to not lift when attached to the product.
• Paper: 128G coated paper (Page 1), 80g book paper (Page 2).
• Dimensions: 570x108mm (unfolded), 190x108mm (folded) (Page 1); 800x80mm (unfolded), 160x80mm (folded) (Page 2).
• Printing: 2-color printing, double-sided, colorfast (Page 1); Single color double-sided printing (Page 2).
• Process: No nails, adhesive for joints.