Tranya X3 Sports Open Earbuds
User Manual
Package List
[Image: Two Tranya X3 earbuds within their magnetic charging case.]
Wireless Earbuds * 2
[Image: A small booklet labeled 'User Manual'.]
User Manual * 1
[Image: A Type-C charging cable.]
Type-C Charging Cable * 1
Important Notes
- Register your product on tranya.com to get an EXTRA three-month warranty for free.
- Before using the X3 wireless earbuds, please charge both the case and earbuds.
- If both earbuds don't sync together, please reset the earbuds.
[Diagram: Shows earbuds being placed into the charging case.]
- If the earbuds don't charge, please clean the charging slot on the case and the contact surface on the earbuds.
[Diagram: Close-up of a charging case slot and the contact points on an earbud.]
- If the sound becomes low without control, please clean the inside mesh of the earbuds by needle or cleaner kit for earbuds.
Power Off
Automatically: When the charging case is at low battery or out of power, the earbuds will not automatically power on/off, please turn them on/off manually.
[Diagram: Earbuds placed inside the charging case, indicating automatic power off.]
Manually: Long press and hold EACH earbud for 4 seconds.
[Diagram: Shows hands holding earbuds, with a timer icon indicating 4 seconds.]
Wearing
- Put the earbuds into your ears.
[Diagram: Earbud being inserted into an ear.]
- Rotate the earbuds till the end of the ear hook is inserted behind the ear, and confirm.
[Diagram: Earbud being rotated for a secure fit behind the ear.]
Connect the Earbuds
- Power on the earbuds and turn on the Bluetooth in your phone.
[Diagram: Earbuds powering on, and a smartphone screen showing Bluetooth settings.]
- Select "X3" and confirm.
[Diagram: Smartphone screen showing a list of Bluetooth devices with "X3" highlighted.]
Charging
Case Power Display:
[Diagram: Charging case with indicator lights showing battery levels: <25% (one white light), 25%-50% (two white lights), 50%-75% (three white lights), 100% (four white lights).]
Charging the Earbuds:
Charging: White indicator is on; Fully charged: White indicator is off.
[Diagram: Earbuds inside the charging case with a white indicator light illuminated.]
Charging the Case:
Charge it with the included Type-C cable.
Charging: Red indicator light is on; Fully charged: Green indicator light will be on.
[Diagram: Charging case connected to a Type-C cable, showing red and green indicator lights.]
Smart Touch Control
| Function | Left Earbud (L/R) | Right Earbud (L/R) |
|---|---|---|
| Play/Pause | Tap one time | Tap one time |
| Volume down | Tap twice | - |
| Volume up | - | Tap twice |
| Previous track | Tap 3 times | - |
| Next track | - | Tap 3 times |
| Answer a call | Tap one time | Tap one time |
| Reject/End a call | Press and hold for 1 second | Press and hold for 1 second |
| Activate Siri/other voice control software | Tap 4 times | Tap 4 times |
| Game Mode | Press and hold for 1 second | Press and hold for 1 second |
Note: Game Mode automatically returns to normal mode after power off.
Power On
Automatically:
[Diagram: Earbuds removed from the charging case, indicating automatic power on.]
Manually: Long press and hold BOTH earbuds for 4 seconds.
[Diagram: Shows hands holding earbuds, with a timer icon indicating 4 seconds.]
How to Reset the Earbuds
If your earbuds stop syncing with each other, please follow below steps to reset the earbuds:
- Turn off the earbuds and put them back to the charging case, then you will see both indicators light.
[Diagram: Earbuds placed inside the charging case.]
- Press and hold the button on the case up to 8-10s until the white lights on the earbuds and case flash 3 times at the same time.
[Diagram: Finger pressing a button on the charging case, with flashing lights indicated.]
- The earbuds will sync together and enter the pairing mode automatically.
[Diagram: Earbuds showing pairing mode indicators.]
FAQ
- Q: Why does signal interruption occur in some places, such as along the railway and the airport?
- A: There are usually lots of underground cable lines along the places mentioned above, which might cause electromagnetic interference and result in the signal interruption.
- Q: My earbuds don't charge, what can I do?
A: Please try to follow below steps:
- Clean the charging slot on the charging case.
[Diagram: Close-up of a charging case slot.]
- Clean the charging connector on earbuds.
[Diagram: Close-up of an earbud's charging connector.]
- Clean the charging slot on the charging case.
- Q: Why won't my earbuds power on/off automatically?
- A: The earbuds would not power off automatically when the case is at low battery or out of power. Please recharge the case. And you can long press for four seconds to power on and long press for four seconds to power off the earbuds.
- Q: Will the Bluetooth mouse cause the signal interference?
- A: Perhaps. When your Bluetooth mouse and earbuds are connected to the same device, it might happen.
