Sonoff SWV Zigbee Smart Water Valve Quick Guide V1.2
Brand: Sonoff
Product Type: Smart Water Valve Controller
Product Overview
The Sonoff SWV is a Zigbee-enabled smart water valve designed for home automation. It allows for remote control and automation of water flow within your home. This quick guide provides essential information for installation, setup, and usage.
Installation and Setup
Follow these steps to install and set up your Sonoff SWV Zigbee Smart Water Valve:
Step 1: Battery Installation
Open the battery cover. Insert 2x AA batteries. Close the battery cover securely.
Visual Description: The diagram shows the main valve body, a compartment for batteries, and an LED indicator light. The steps illustrate opening the cover, inserting batteries, and closing the cover.
Step 2: Water Pipe Connection
Connect the valve to your water pipe system, ensuring the inlet and outlet are correctly oriented. Ensure a watertight seal is achieved to prevent leaks.
Visual Description: A diagram illustrates the valve being fitted onto water pipes, clearly labeling the 'Inlet' and 'Outlet' ports.
Step 3: Pairing with Zigbee Gateway
Download the eWeLink App on your smartphone. Add your Sonoff Zigbee Bridge or another compatible Zigbee gateway to the app. Then, add the SWV device to your Zigbee gateway following the app's instructions.
Visual Description: The process is shown through a series of images: downloading the eWeLink app, adding a Zigbee bridge, and then pairing the SWV device with the gateway, indicated by LED lights and app interfaces.
Step 4: Communication Distance Verification
Verify the effective communication distance between the SWV device and your Zigbee gateway to ensure stable connectivity.
Visual Description: A diagram depicts a user holding the valve at a distance from the Zigbee gateway, with an indicator showing the verification process.
Cautions
- Do not use new and old batteries together.
- Do not use rechargeable batteries.
- Do not expose the device to water or moisture.
- Ensure proper installation to avoid leaks.
- Handle the device with care to prevent damage.
- (Translated from Chinese) Do not disassemble or modify the device.
Technical Requirements and Testing
Technical Requirements:
- Size: Unfolded 720*120mm, folded 80*120mm
- Material: 105g copperplate paper
- Printing: Four-color printing
- Craft: Accordion 9-fold
- Environmental Compliance: All materials and processes meet EU WEEE and RoHS requirements.
Test Specifications:
| Test Item | Test Condition | Tolerance A | Tolerance B | Tolerance C | Unit/Size |
|---|---|---|---|---|---|
| RoHS Detection | Report (Valid for one year) | ||||
| Pressure Test | 125°C / 70°C | ±0.05 | ±0.10 | ±0.15 | 3<L≤6 |
| Glow Wire Test | 650°C / 750°C | ±0.10 | ±0.15 | ±0.20 | 6<L≤16 |
| UV Aging Test | 72h x 48H | ±0.20 | ±0.30 | ±0.45 | 16<L≤30 |
| Acetic Acid Test | 3min / 5min | ±0.25 | ±0.35 | ±0.50 | 30<L≤120 |
| Salt Spray Test | 24/36/48H | ±1° | 50°≤L≤120 | ±0.5° | 0<L≤10 |
| High Temperature Storage | 70°C | ±0.3° | 120°≤L≤400 | ±0.15° | 10<L≤50 |
| PC, White | |||||
| Low Temperature Storage | -40°C | ||||
| High Temperature Storage | 40°C / 70°C | ||||
| RCA Test | 100 cycles / 150 cycles | ||||
| Alcohol/Pencil Hardness Test | 3H / 4H | ||||
| Adhesion Test | Silk screen printing |
Note: The table contains specific test parameters and tolerance levels for various material and performance tests.
Compliance Information
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
SAR Warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
EU Declaration of Conformity
Shenzhen Sonoff Technologies Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
WEEE Disposal and Recycling Information
This symbol ♻️ indicates that the product must not be disposed of with household waste. It should be returned to a designated collection point for recycling of electrical and electronic equipment. Proper disposal prevents negative consequences for the environment and human health.
CE Frequency Information
For CE Frequency: Zigbee 2405-2480 MHz, EU Output Power: Zigbee 2.4GHz/10dBm.
