Specifications
| Model | Frequency Response | Sensitivity (2.83V @ 1m) | Nominal Impedance | Maximum SPL (Single) | Power Handling (R.M.S.) | Recommended Amplifier Requirements (R.M.S.) | Crossover Frequency | External Dimensions (H x W x D) | Weight |
|---|---|---|---|---|---|---|---|---|---|
| Silver 50 | 47 Hz - 35 kHz | 86dB | 8 Ohms | 104dB | 100 W | 40-100 W | 2.6 kHz | 284 x 165 x 272 mm (11 7/64 x 6 1/2 x 10 3/8") | 5.6 kg (12 lb 6 oz) |
| Silver 100 | 35 Hz - 35 kHz | 87.5dB | 8 Ohms | 106dB | 120 W | 40-120 W | 2.3 kHz | 377 x 230 x 332 mm (14 3/4 x 9 1/16 x 13 5/64") | 9.4 kg (20 lb 12 oz) |
| Silver 200 | 34 Hz - 35 kHz | 87.5dB | 8 Ohms | 108dB | 150 W | 60-150 W | 2.7 kHz | 930 x 254 x 329 mm (36 39/64 x 10 x 12 61/64") | 13.7 kg (30 lb 3 oz) |
| Silver 300 | 31 Hz - 35 kHz | 87.5dB | 8 Ohms | 110dB | 200 W | 80-200 W | 750Hz & 2.8 kHz | 1045 x 274 x 389 mm (41 9/64 x 10 25/32 x 15 5/16") | 19.3 kg (42 lb 9 oz) |
| Silver 500 | 27 Hz - 35 kHz | 90.5dB | 8 Ohms | 111dB | 250 W | 80-250 W | 800Hz & 2.7 kHz | 1095 x 319 x 389 mm (43 7/64 x 12 9/16 x 15 5/16") | 22.5 kg (49 lb 9 oz) |
| Silver C250 | 65 Hz - 35 kHz | 88.5dB | 8 Ohms | 110dB | 150 W | 80-200 W | 650 Hz & 3.3 kHz | 206 x 481 x 272 mm (8 7/64 x 18 15/16 x 10 45/64") | 10.6 kg (23 lb 6 oz) |
Setup and Positioning
Unboxing
Carefully remove all components from the packaging. For models 200, 300, and 500, ensure you have all included accessories such as feet and screws.
Assembling Feet (Models 200, 300, 500 only)
Attach the outrigger feet to the base of the speaker cabinet using the provided screws. Ensure they are securely fastened for stability.
Leveling Feet
Adjust the leveling feet located at the base of the speakers by rotating them. This ensures the speaker is stable and sits flush on the floor, optimizing performance.
Wiring to an Amplifier
Connect speaker wire from your amplifier's positive (+) terminal to the speaker's positive (+) terminal, and from the amplifier's negative (-) terminal to the speaker's negative (-) terminal. Ensure correct polarity for optimal sound.
Speaker Positioning
For 2 Channel Stereo (2.0 Setup)
Place the speakers equidistant from the listening position and the front wall, forming an equilateral triangle with the listener. This typically creates an optimal soundstage.
For Surround Sound (5.1 / 7.1 Setup)
For surround sound, position front speakers (A) at appropriate angles relative to the listener. For 7.1 systems, additional surround speakers (B) should be placed at wider angles. For 5.1 systems, use the 'A' positions for surrounds.
