Overview
The Infobit iTrans WP70HBC is a 2x1 wall plate transmitter and receiver kit designed for extending USB-C and HDMI signals over HDBT 3.0 technology. This kit supports uncompressed 4K@60Hz 4:4:4 8-bit SDR and 4K@60Hz 4:2:2 12-bit HDR video, along with audio, USB 2.0, and control signals up to 40m/131ft via a single Cat 6A or higher cable.
The transmitter features both USB-C and HDMI inputs, with the USB-C port supporting full-featured functionality including video, data, and 60W charging. The receiver is ideal for scenarios requiring USB signal extension to interactive displays.
Key Features
- HDBT 3.0 technology for uncompressed 4K@60Hz transmission.
- Simultaneous transmission of video, audio, USB 2.0, and control signals.
- PoH+ support for powering the remote device.
- Automatic and manual input switching.
- RS232 for device control and firmware updates.
Specifications
For detailed technical specifications, including input/output resolutions, maximum data rates, and operating conditions, please refer to the full datasheet.
Transmission Distance
The transmission distance varies based on the cable type used. Cat 6A or 7 cables are recommended for optimal performance, supporting up to 40m/131ft for 4K@60Hz 4:4:4 signals.
Wiring and Panel Description
The document provides detailed diagrams and descriptions for the front and rear panels of both the transmitter and receiver units, along with essential wiring instructions and warnings.
For more information, visit Infobit AV.
