Infobit iSwitch 201HKL
4K60 2x1 HDMI KVM Switcher Lite
Datasheet V1.0
Description
The 2x1 HDMI2.0 KVM Switch provides great flexibility in integrating cross-platform computer equipment. It allows users to switch easily and reliably between any HDMI computers using a single HDMI-compliant display. The iSwitch 201HKL features two USB 2.0 ports and dedicated keyboard and mouse ports. While using mouse and keyboard control, USB 2.0 can also connect to USB drives and hubs simultaneously. Through the KVM's USB 2.0 hub ports, users can connect USB drives, printers, barcode scanners, webcams, USB microphones/speakers, or other USB devices. Switching can be controlled via front panel buttons, RS232, or keyboard hot keys.
Features
- Use a single set of keyboard, mouse, and monitor to control two computer devices.
- Support hot key commands and mouse gestures for switching inputs.
- Control the KVM switch using front panel buttons, RS232, or keyboard hot keys.
- Keyboard functionality is available without delay after switching input sources.
- Supports resolutions up to 3840x2160@60Hz 4:4:4.
- Compliant with HDCP 2.2 and HDMI 2.0 standards.
- Supports USB 2.0 for printers, USB drives, webcams, USB microphones/speakers, etc.
- Compatible with Unix/Windows/Debian/Ubuntu/Fedora/Mac OS X/Raspbian/Ubuntu for Raspberry Pi and other Linux-based systems.
- Supports hot plugging: connect or disconnect devices to the KVM switch at any time without turning off the devices.
- Supports HDR 10 and Dolby Vision.
- Plug and play functionality.
Package List
- 1x iSwitch 201HKL
- 1x DC to USB power cable
- 2x USB Cables
- 1x User manual
Panels
The front panel features a 'SWITCH' button (1) for selecting PC1 or PC2. Indicators for PC1 (2) and PC2 (3) show the active connection, and a PWR indicator (4) shows power status. There are two USB A 2.0 ports labeled K/M (5) for keyboard and mouse, and two USB A 2.0 ports labeled USB2.0 (6) for other USB devices. The rear panel includes two USB B 2.0 ports (7, 8) for connecting to PC1 and PC2 hosts respectively. There are two HDMI A Input ports (9, 10) for PC1 and PC2. An HDMI A Output port (11) connects to the display. A DC 5V port (12) is for power supply. A 13-pin block terminal (13) is for RS232 control.
| No. | Ports | Descriptions |
|---|---|---|
| 1 | Switch | Switching PC1 or PC2 |
| 2 | Indicator | PC1 Indicator |
| 3 | Indicator | PC2 Indicator |
| 4 | Indicator | Power Status Indicator |
| 5 | 2x USB A 2.0 | Keyboard and Mouse |
| 6 | 2x USB A 2.0 | USB devices |
| 7 | 1x USB B 2.0 | To PC1 host |
| 8 | 1x USB B 2.0 | To PC2 host |
| 9 | 1x HDMI A Input | To PC1 |
| 10 | 1x HDMI A Input | To PC1 |
| 11 | 1x HDMI A Output | To display |
| 12 | DC 5V | Power Supply IN |
| 13 | 1x 3-pin block terminal | RS232 Control |
Specifications
| Attribute | Details |
|---|---|
| Model | iSwitch 201HKL |
| Name | 4K60 2x1 HDMI KVM Switcher Lite |
| Protocol | HDMI 2.0; HDCP 2.2 |
| HDMI Bandwidth | 18Gbps |
| Resolution | Up to 3840x2160@60Hz 4:4:4 |
| HDMI Port | 2x HDMI Type A |
| HDMI Cable | Less than 5 meters at 1080p@60Hz |
| RS232 | 3-pin connector |
| Baud rate | 1152000bps |
| Data bit | 8bits |
| USB2.0 | 2x USB 2.0 type A devices ports |
| PC1/2 | 2x USB 2.0 B |
| K/M | USB-A, Keyboard and mouse |
| Supported OS | Unix/Windows/Debian /Ubuntu /Fedora /Mac OS X/ Raspbian /Ubuntu for Raspberry Pi and other Linux based system |
| Power adapter | DC 5V |
| ESD Protection | Human body model - ±8kV (Air-gap discharge) |
| Temperature | -5°C ~ +70°C |
| Humidity | 5% ~ 90% |
| Product Dimension | 145(L) x 67(W) x 22(H) mm |
| Warranty | 3 years |
Diagram Description
The connection diagram illustrates the setup for the iSwitch 201HKL. It shows two computers, PC 1 and PC 2, each connecting to the KVM switch via HDMI and USB B ports. PC 1 connects to INPUT-1 and its USB B port connects to the KVM's PC1 USB B port. PC 2 connects to INPUT-2 and its USB B port connects to the KVM's PC2 USB B port. A display device connects to the KVM's HDMI OUTPUT port. The KVM's K/M port is used for connecting a keyboard and mouse. The KVM's USB2.0 ports are for connecting additional USB devices such as USB drives or webcams. An RS232 port is also shown for serial control.
