BASS JAXX

VITAL TRUE WIRELESS EARBUDS

INSTRUCTION MANUAL

Thank you for purchasing the Vital True Wireless Earbuds. This manual provides more information about the wireless earbuds, please read the instructions before using.

Product Overview

Earbuds

Left Side

[Image of left earbud]

On/Off Button/Play/Pause Music, Answer/End Call
LED Indicator

Right Side

[Image of right earbud]

On/Off Button/Play/Pause Music, Answer/End Call
LED Indicator

Charging Case

[Image of charging case with earbuds inside]

LED Indicator (Charging Case)
Micro USB Charging Port

Package Contents

Vital True Wireless Earbuds x 1 pair
Portable Charging Case x 1
Micro USB Charging Cable x 1
Instruction Manual x 1

Specifications

Driver Diameter: 10 mm
Impedance: 32 Ohms
Frequency Response: 20 Hz – 20K Hz
Sensitivity: 96 dB +/- 3 dB
Earbud Battery Capacity: Li-ion 3.7V 35 mAh Per Earbud
Charging Case Battery Capacity: Li-ion 3.7V 500 mAh (6 Times)
Playtime: 1.5 Hours Per Charge
Total Playtime: 10 Hours
Charging Time: 1.5 Hours
Bluetooth Range: 32.8 Feet
IPX4 Water Protection (For Earbuds Only)
Charging Method: Magnetic Charging Case
Micro USB Charging Cable Included

Power On/Off

Power On

Press and hold down the On/Off Button of earbuds for 3 seconds and the LED will flash.

Power Off

Press and hold down the On/Off Button of earbuds for 4 seconds and the LED will turn off.

Pair the wireless earbuds with your mobile device

Keep the distance between the earbuds and mobile device within 32.8 feet.
De-activate the Bluetooth function on your mobile device.
Power on both earbuds simultaneously by pressing the On/Off buttons for 3 seconds and wait for 3 to 5 seconds for auto pairing. The Left earbud has indicator blinking alternatively in Red and Blue. The Right earbud will be blinking in Blue slowly when auto pairing is done successfully on L/R earbuds.
Activate the Bluetooth function on your mobile device and select "VITAL TWS" from the list shown.
After pairing is successful, both earbuds will start blinking slowly in blue.

*Attention: If the auto pairing is not successful, manual pairing between earbuds is essential by following below procedures:

Make sure the earbuds are charged.
De-activate the Bluetooth function on your mobile device. (if you had been paired the earbuds to some other mobile device(s) nearby, please sure to de-activate those device(s) too).
Power on both earbuds simultaneously by pressing the On/Off buttons for 3 seconds and wait for 3 to 5 seconds for auto pairing. (Keep the Bluetooth function off on your mobile device before this operation.)
Activate the Bluetooth function on your mobile device and select "VITAL TWS" from the list shown.
After pairing successfully, both earbuds will start blinking slowly in blue.

Reconnect the wireless earbuds to your mobile device

When powered on, the wireless earbuds will automatically connect with the last successfully paired device.

Disconnect the wireless earbuds from your mobile device

Power off the wireless earbuds; or
Switch off the Bluetooth on your mobile phone; or
Leave the earbuds 60ft away from your mobile phone or further.

Answer / Reject a call

When receive a call, press the On/Off Button once (on either earbud) to accept the call, or answer the call normally via your mobile phone. Press and hold 2 seconds to reject it.

End a call

To end the call, just press On/Off button at any side of earbud with Beep sound to end it.

Functions

Pause / Play Music: Short Press on On/OFF Button
Go back to previous song: Press Left On/Off Button for 1 second.
Advance to next song: Press Right On/Off Button for 1 second.
Volume up: Double click Right On/Off button to increase
Volume down: Double click Left On/Off to reduce

Charging your Earbuds

Open the charging case cover.
Insert the Vital Earbuds into the charging case.
The earbuds will start the charge once the on/off button on charging case is pressed.
The Red LED of earbuds will be turn on when charging the earbuds.
Once fully charged, the LED will be off.
The LED display on charging case shows the level of charging case battery capacity.

Recharge Charging Case

For your safety, please always use appropriate 5V input charger/Adapter to charge the product.

DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product.

Use the Micro USB charging cable provided with the packaging.
Connect the Micro USB plug to Micro USB charging port on the charging case, then connect the USB plug to a USB port on a computer or wall adapter to begin charging.
The last digit of LED display will be flash during charging.
The LED display will show 100 and stop flashing after fully charged.

NOTE:

You must select a qualified charger from a regular manufacturer.
You must charge the charging case and earbuds if it has been not used for more than 12 months.

[Image of USB Plug and Micro USB Plug]

FAQ

If the wireless earbuds cannot be paired with your device, please try the following:
- Ensure that your earbuds are in pairing mode or reconnection mode
- Ensure that Bluetooth search function of your mobile device is activated.
If the wireless earbuds will not turn on:
- Make sure the earbuds are fully charged.
Can I change the battery for the earbuds?
- The wireless earbuds and charging case use a built-in non-detachable battery which cannot be removed.
If the charging case cannot be recharged:
- If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered.

Safety instructions for the lithium battery and charging the product

The input voltage to the product is 5V 1A.
In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product.
Only charge the product at ambient temperatures between 10 deg °C/ 50 deg °F and 40 deg °C/104 deg °F.
Do not heat above 70 deg °C/158 deg °F, eg. Do not expose to sunlight or throw into fire.
Switch off the product after use.
Please note that we won't take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Models: VITAL True Wireless Earbuds

Google Docs
Google Drive
Download [pdf]
Download Optimized

File Info : application/pdf, 1 Pages, 428.94KB

GetApplicationAttachment.html?id=5105816 Microsoft Excel 2016

	MIRO True Wireless Earbuds Instruction Manual \| BASS JAXX Comprehensive instruction manual for BASS JAXX MIRO True Wireless Earbuds, covering setup, pairing, functions, charging, and safety guidelines.
	Phantom True Wireless Earbuds Instruction Manual \| Bass Jaxx Official instruction manual for Phantom True Wireless Earbuds by Bass Jaxx. Learn how to pair, charge, use functions, and troubleshoot your earbuds.
	Porta True Wireless Earbuds EP-0707 IM Instruction Manual Instruction manual for Porta True Wireless Earbuds (Model EP-0707 IM) by Bass Jaxx. Covers setup, pairing, functions, charging, safety, and FCC compliance.
	Bass Jaxx Clique True Wireless Earbuds Instruction Manual Instruction manual for Bass Jaxx Clique True Wireless Earbuds, covering setup, pairing, functions, charging, and safety information.
	BASS JAXX CLASSIC True Wireless Earbuds Instruction Manual Comprehensive instruction manual for the BASS JAXX CLASSIC True Wireless Earbuds, covering setup, pairing, functions, charging, specifications, and safety information. Includes FCC compliance details.
	Agility True Wireless Earbuds Instruction Manual - Bass Jaxx EP-0649 Comprehensive instruction manual for Bass Jaxx Agility True Wireless Earbuds (Model EP-0649). Learn how to power on, pair, use functions, charge, and troubleshoot your earbuds.
	Phantom True Wireless Earbuds Instruction Manual Instruction manual for Phantom True Wireless Earbuds by Bass Jaxx, detailing setup, usage, functions, charging, and safety information.
	Sonata True Wireless Earbuds EP-0665 Instruction Manual Official instruction manual for the Bass Jaxx Sonata True Wireless Earbuds (Model EP-0665), covering setup, pairing, functions, charging, and troubleshooting.