Porta True Wireless Earbuds - EP-0707 IM Instruction Manual

Product Overview

The diagram illustrates the Porta True Wireless Earbuds and their charging case. It labels four key components: 1. LED Light-up / Built-in Microphone 2. Touch Control / On/Off Button (also used for Play/Pause Music, Answer/End Call) 3. USB Type-C Charging Port 4. A Metal Clip on the charging case.

Package Contents

• 1(One) Pair Earbuds (1.3in. x 0.7in. x 0.7in. / 3.3cm x 1.9cm x 1.9cm each)
• 1(One) Portable Charging Case (2in. x 2.1in. x 0.9in. / 5cm x 5.4cm x 2.4cm)
• 1(One) Charging Cable (10in. / 25cm)
• 1(One) Instruction Manual

Specifications

Operation

Power On/Off

Power On

Press and hold down the ON/OFF Button of earbuds for 3 seconds and the LED will flash.

Power Off

Press and hold down the ON/OFF Button of earbuds for 4 seconds and the LED will turn off.

Pairing the Wireless Earbuds with Your Mobile Device

Automatic Pairing

1. Keep the distance between the earbuds and mobile device within 32.8 feet.
2. De-activate the Bluetooth function on your mobile device.
3. Remove the protective stickers from the earbuds and place them back into the charging case. Take both earbuds out from the charging case and wait for 3 to 5 seconds for auto pairing. The earbud LED will blink White. The other earbud will stop blinking when auto pairing is done successfully.
4. Activate the Bluetooth function on your mobile device and select "EP-0707 TWS" from the list shown.
5. After successful pairing, both earbuds' LEDs will stop blinking.

Manual Pairing (if auto pairing fails)

Attention: If auto pairing is not successful, manual pairing between earbuds is essential by following these procedures:

1. Make sure the earbuds are charged.
2. De-activate the Bluetooth function on your mobile device. (If the earbuds have been previously paired to other nearby devices, ensure those devices' Bluetooth is also deactivated.)
3. Power on both earbuds simultaneously by pressing the ON/OFF buttons for 3 seconds and wait for 3 to 5 seconds for auto pairing. (Keep the Bluetooth function off on your mobile device during this step.)
4. Activate the Bluetooth function on your mobile device and select "EP-0702 TWS" from the list shown.
5. After successful pairing, both earbuds' LEDs will stop blinking.

Connecting and Disconnecting

Reconnect the Wireless Earbuds to Your Mobile Device

When powered on, the wireless earbuds will automatically connect with the last successfully paired device.

Disconnect the Wireless Earbuds from Your Mobile Device

• Power off the wireless earbuds.
• Switch off the Bluetooth on your mobile phone.
• Leave the earbuds 60ft away from your mobile phone or further.

Call Management

Answer / Reject a Call

When receiving a call, press the ON/OFF Button once (on either earbud) to accept the call, or answer the call normally via your mobile phone. Press and hold for 2 seconds to reject it.

End a Call

To end the call, press the ON/OFF button on either earbud. A Beep sound will indicate the call has ended.

Functions

• Pause / Play Music: Short Press on ON/OFF Button
• Go back to previous song: Double click left ON/OFF button.
• Advance to next song: Double click right ON/OFF button.
• Voice Assistant: Press and hold ON/OFF button for 2 seconds.

Charging

Charging Your Earbuds

Steps

1. Open the charging case cover.
2. Remove the protective stickers between the earbuds and the charging case.
3. Insert the Earbuds into the charging case.
4. The earbuds will start charging automatically.
5. The LED indicator light of the Earbuds will be turned on when charging.
6. Once fully charged, the LED will turn off.

Note

If charging does not start, take out both earbuds from the charging case and reinsert them after a few seconds.

Recharge Charging Case

⚠️ For your safety, please always use an appropriate 5V output charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product.

Charging Steps

1. Use the USB Type-C charging cable provided with the packaging.
2. Connect the USB plug to a USB port on a computer or wall adapter, then connect the USB Type-C plug to the USB Type-C charging port on the charging case to begin charging.
3. The last digit of the Battery Level Indicator will be flashing during charging.
4. Once fully charged, the Battery Level Indicator will stop flashing.
5. The Earbuds Battery Charging Indicator will be flashing during the earbuds are charging and will turn off after fully charged.

Notes

• You must select a qualified charger from a regular manufacturer.
• You must charge the charging case and earbuds if they have not been used for more than 6 months.

A simple diagram shows two types of plugs: a standard USB-A plug on the left, and a USB Type-C plug on the right.

⚠️ CAUTION: The USB Type-C charging cable included with this item is intended for use with this product. Only use the included USB Type-C charging cable to charge this product.

Frequently Asked Questions (FAQ)

If the wireless earbuds cannot be paired with your device

Please try the following:

• Ensure that your earbuds are in pairing mode or reconnection mode.
• Ensure that the Bluetooth search function of your mobile device is activated.

If the wireless earbuds will not turn on

• Make sure the earbuds are fully charged.
• Make sure the protective stickers are removed from the Earbuds.

Can I change the battery for the earbuds and the charging case?

The wireless earbuds and the charging case use a built-in non-detachable battery which cannot be removed.

If the charging case cannot be recharged

• If you use a power outlet, ensure that the power supply is connected securely and the outlet works.
• If you use a computer, ensure that it is connected and the USB port is powered.

Safety Instructions for the Lithium Battery and Charging

• The input voltage to the product is 5V 1A.
• In order to charge the product in a safe manner and under reliable conditions, please only adopt a certified appropriate charger/adapter for charging the product.
• Only charge the product at ambient temperatures between 10 °C / 50 °F and 40 °C / 104 °F.
• Do not heat above 70 °C / 158 °F, e.g., do not expose to sunlight or throw into fire.
• Switch off the product after use.
• Please note that the manufacturer won't take any responsibility for any wrong operation (e.g., voltage higher than 5V) as this may result in severe injury or loss of property, and they cannot control the operating process during the time the user is using this product.
• In extreme cases, abuse or misuse of the Lithium battery pack can lead to explosion, heat generation, fire development, or smoke development.

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note on Testing and Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Warning Statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by 1616 Holdings, Inc. is under license. Other trademarks and trade names are those of their respective owners.