MCHOSE G3 Wireless Mouse
User's Manual
Product Overview
The MCHOSE G3 Wireless Mouse is designed for versatile use. It features a Type-C port for charging and wired connectivity. Indicator lights are present for Wireless 2, Wireless 1, and 2.4G modes. The mouse includes a Mode Switch Button for changing modes and initiating pairing, a DPI Indicator Light, and a Power Switch. The 2.4G USB dongle is conveniently stored within the mouse cover.
Diagram shows mouse top view with labels: Type-C Port, Wireless 2 Indicator Light, Wireless 1 Indicator Light, 2.4G Indicator Light, Mode Switch Button, DPI Indicator Light, Power Switch, USB Dongle (Stored inside the cover).
Battery Status Indicator: The mouse features a battery status indicator. A flashing red light signals the need for immediate charging. A solid red light indicates that charging is in progress. A solid green light signifies that charging is complete.
Connection Modes
Charging and Wired Connection
To connect the mouse via a cable, plug the USB Type-C cable into the mouse's Type-C port and the other end into a USB port on your computer. The mouse is ready to use immediately. When the mouse is in 2.4G or wireless mode, inserting the USB cable will automatically switch it to wired mode and begin charging.
2.4G Connection
Ensure the power switch is toggled to the 'ON' position. A short press of the power switch selects the 2.4G mode. Retrieve the USB dongle from its storage compartment at the bottom of the mouse and insert it into a USB port on your computer. The mouse is now ready for use.
For manual pairing of the dongle: Press the Mode Switch button until the indicator light flashes, indicating pairing status. Insert the USB dongle into the computer's USB port. Position the mouse close to the USB dongle (within 20cm). The indicator light will turn off upon a successful connection.
Wireless Connection
Toggle the power switch to the 'ON' position. Short press the switch to select 'Wireless 1' mode. To enter pairing mode, press and hold the mode switch button until the indicator light flashes rapidly. On your computer or device, search for the device named 'G3 Mouse'. The indicator light will turn off once the connection is successfully established. The connection procedure for 'Wireless 2' is identical to 'Wireless 1'.
DPI Adjustment
You can adjust the mouse's sensitivity by single-pressing the DPI Switch Button. This action cycles through six different DPI levels, which can also be further customized via the driver software.
The DPI indicator light colors correspond to the selected DPI levels:
- Level 1: Red Light
- Level 2: Green Light
- Level 3: Blue Light
- Level 4: Cyan Light
- Level 5: Yellow Light
- Level 6: Purple Light
Diagram shows a mouse with colored LED indicators for DPI levels.
Charging Instructions
It is recommended to charge the mouse using a computer's USB port. Avoid using substandard, non-compliant, over-voltage, or over-current power adapters. Keep the mouse away from high-temperature devices during charging. If the device will not be used for an extended period, please turn off the power switch.
These charging guidelines are also applicable to other rechargeable electronic devices, such as keyboards, headphones, and speakers.
Warranty Card
Thank you for purchasing this product. Should you encounter any quality issues within the warranty period, please contact customer support. Presenting this warranty card will facilitate comprehensive after-sales service.
| Product Items: | Customer Name: |
| Serial No.: | Contact Address: |
| Purchase Date: | TEL / E-mail: |
| Purchase Channel: | Postcode: |
Important Safety and Compliance Information
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This device generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try correcting the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
