YW05 Bluetooth Speaker Manual

Controls

The speaker features the following controls:

• 1. Power/LED Button: Press and hold to turn the speaker on or off. Press twice to cycle through LED light modes.
• 2. LED Indicator: Shows charging status and operational modes.
• 3. Volume Down / Previous Track Button: Short press to decrease volume. Press and hold to skip to the previous track.
• 4. Play/Pause Button: Press to play or pause music. Also used to answer/hang up calls.
• 5. Volume Up / Next Track Button: Short press to increase volume. Press and hold to skip to the next track.
• 6. Micro SD Card Input: Slot for inserting a Micro SD card.
• 7. Type-C Charging Port: Port for charging the speaker using a Type-C USB cable.

Charging

The speaker requires recharging when switched off.

1. Connect the Type-C end of the supplied USB cable to the speaker's Type-C port (7).
2. Connect the other end of the cable to a PC's USB port or a USB charger (5V, 1A, not included).
3. The LED indicator (2) will glow red during charging. It turns off when fully charged.

Basic Operation

To turn on the speaker, press and hold the power button (1).

Modes:

• Bluetooth Mode: Upon powering on, the speaker defaults to Bluetooth mode.
• Micro SD Mode: If a Micro SD card is inserted into the Micro SD port (6), the speaker will automatically start playing music.

Volume Adjustment

Short press the Volume - (3) or Volume + (5) buttons to decrease or increase the volume.

Using a Micro SD Card

1. Turn on the speaker.
2. Insert a Micro SD card into the Micro SD port (6).
3. The speaker will automatically begin playing music.
4. Press and hold the Volume-/Previous track button (3) to skip to the previous track.
5. Press and hold the Volume +/Next track button (5) to skip to the next track.
6. Press the Play/Pause button (4) to pause or resume playback.

Bluetooth Operation

Pairing Devices:

1. Place the speaker near the Bluetooth device you wish to pair.
2. Power on the speaker.
3. Follow your device's instructions to search for the speaker.
4. The speaker name is "BTP-127". Select it from your Bluetooth device list and enter "0000" as the password if prompted.
5. Once paired successfully, you can stream audio from your Bluetooth device to the speaker.

Notes:

• The speaker can only connect to one Bluetooth device at a time. Connections cannot be interrupted during operation.
• If Bluetooth pairing fails, disable Bluetooth on the unwanted device, restart the speaker, and try searching again.

Commands in Bluetooth Mode:

1. Press and hold the Volume-/Previous Track button (3) to skip to the previous track.
2. Press and hold the Volume +/Next track button (5) to skip to the next track.
3. Press the button (4) to pause or resume playback.

True Wireless Stereo (TWS) Bluetooth Connection

This feature allows connecting two speakers for a stereo experience.

1. Power on two speakers. They will default to Bluetooth mode (indicated by a sound).
2. On one speaker, turn off the Bluetooth function on your phone or other connected device. Then, press and hold the play/pause (4) button on either speaker. A sound will confirm TWS activation. After a few seconds, both speakers will provide a voice prompt, indicating they are connected to each other.
3. Turn on your mobile phone's Bluetooth and search for "BTP-127".
4. Select "BTP-127" to connect your phone to the speakers.
5. A voice prompt will confirm the connection, and you can enjoy music from both speakers.
6. Press and hold the play/pause (4) button again on one speaker to exit TWS mode, reverting to single-speaker playback.

Hands-Free Function

When receiving a call, press the play/pause (4) button to answer. Press it again to end the call.

Technical Features