IKEA NATTBAD Bluetooth Speaker

Product Overview

The IKEA NATTBAD is a compact Bluetooth speaker designed for wireless audio streaming. It features Spotify Tap™ for quick music control, multi-speaker mode for synchronized audio, and a simple setup process.

What's Included

• NATTBAD Bluetooth Speaker
• 1x AC Power Cord

Getting Started

Connecting Power

1. Connect the AC power cord to the AC power input (5) on the speaker.
2. Plug the other end into a wall outlet.

Turning On and Pairing

1. Shortly press the System button (4) to turn the speaker ON. The LED status light will pulsate white, indicating pairing mode. If pairing mode doesn't start automatically, press and hold the System button (4).

2. Turn on Bluetooth ? on your device (smartphone ?, tablet ?) and select "NATTBAD" from the list of available devices to pair.

3. Once paired, a confirmation sound will be audible, and the LED status light will blink twice.

LED Status Light Indicators (1)

• Pulsating white: Bluetooth ? is searching for a device (pairing mode).
• Steady white: Speaker is on and ready to be used. ✔️
• Blinking red: Factory reset is ongoing. ❗

[Icon: Save these instructions for future use.]

Using the Speaker

Adjusting Volume

Turn the Sound knob (2) counterclockwise ⬅️ to decrease volume or clockwise ➡️ to increase it. Volume can also be controlled from your connected device.

Playback Controls

Use the Sound knob (2) for playback control:

• Short press: Play ▶️ / Pause ⏸️ track.
• Double press: Skip to the next track ➡️.
• Triple press: Play the previous track ⬅️.

Spotify Tap™

Spotify Tap™ allows you to resume and change music directly from the speaker with a press of the Spotify Tap™ button (3). [Spotify logo]

Getting Started with Spotify Tap™:

1. Download the Spotify app from the App Store (iOS) or Google Play Store (Android).
2. Ensure your device is paired via Bluetooth ? to the NATTBAD speaker.
3. Make sure the Spotify app is open (required only for the first use).
4. Press the Spotify Tap™ button (3) to start music.

From then on, a quick press of the Spotify Tap™ button (3) will resume music playback as long as your device is paired and within range.

Changing Music with Spotify Tap™:

While music is playing ?, press the button (3) again to switch to a recommended track.

Connecting Multiple Speakers (Multi-Speaker Mode)

The NATTBAD speaker supports multi-speaker mode, allowing it to connect with other compatible IKEA speakers to play the same music simultaneously.

1. Connect your device to one of the speakers via Bluetooth ?.
2. On another speaker you wish to connect, press and hold the Sound knob (2). The LED status light (1) will double blink white, and a confirmation sound will be emitted from the speakers.
3. Repeat this process for each additional speaker you want to add to the multi-speaker mode.

Disconnecting Speakers from Multi-Speaker Mode

To disconnect a speaker from multi-speaker mode, press and hold the System button (4) for more than 1.5 seconds on that speaker. This will enter pairing mode for that speaker.

Unpairing Bluetooth Devices

To connect a different device, simply turn off Bluetooth ? on the currently paired device. The speaker should automatically enter pairing mode. If not, press and hold the System button (4) to manually enter pairing mode.

Factory Reset

If the speaker is not functioning correctly, perform a factory reset. Press and hold the System button (4) for 8 seconds until the red LED status light stops blinking. You will need to re-pair your device afterward.

Technical Specifications

Safety and Care Instructions

⚠️ WARNING:

• Risk of overheating! Never install in a confined space. Maintain at least 5 mm clearance for ventilation. Do not cover ventilation slots.
• Keep away from open flames, heat sources, and direct sunlight.
• Indoor use only. Avoid dripping, splashing, and placing liquid-filled objects on the device.
• Do not place on other electrical equipment.
• If the power cord is damaged, replace it with a type-approved cord.
• Do not place open flame sources (e.g., candles) on the device.
• The mains plug or coupler serves as the disconnect device and must remain accessible.

IMPORTANT:

• Avoid direct sunlight and heat sources to prevent overheating.
• Do not expose to wet, humid, or excessively dusty environments.
• Wireless range is measured in open air; building materials can affect it.
• High volume may damage hearing.
• Do not touch acoustic components.
• Do not use as a shelf or stand.
• Check the bottom of the product for important markings.

Care Instructions

To clean, disconnect the speaker from the power outlet. Wipe with a slightly damp cloth. Never submerge in water. Dry with a soft cloth before reconnecting.

Note: Never use abrasive cleaners or chemical solvents.

Regulatory Information

This device complies with Part 15 of the FCC Rules and applicable Innovation, Science and Economic Development Canada licence-exempt RSS standards. Operation is subject to two conditions: (1) the device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

ATTENTION: Unauthorized modifications may void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with Class B digital device limits per FCC Rules Part 15, providing reasonable protection against harmful interference in residential installations.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause radio communication interference. If interference occurs, try the following:

• Reorient or relocate the receiving antenna.
• Increase separation between equipment and receiver.
• Connect to a different circuit than the receiver.
• Consult a dealer or qualified radio/TV technician.

Disposal Information

The crossed-out bin symbol ?️❌ indicates this product should not be disposed of with regular household waste. Recycle according to local environmental regulations. Separating this item helps reduce waste and environmental impact.

For more information, contact your IKEA store.

Manufacturer Information

Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN

Importer/Distributor (Mexico): IKEA Supply Mexico, S.A. de C.V., Calle Oriente 158, número 440, Piso 3, Local JD-01, Colonia Moctezuma, Segunda Sección, Alcaldía Venustiano Carranza, C.P. 15530, Ciudad de México. Tel. 55-8310-8310.