NATTBAD Bluetooth Speaker
User Manual and Instructions
Product Overview
The NATTBAD is a Bluetooth speaker designed for indoor use, offering wireless audio playback and multi-speaker connectivity.
Key Features:
- Bluetooth connectivity ?
- Spotify Tap™ ? for music control
- Multi-speaker mode for synchronized audio
- Adjustable volume via sound knob
- LED status indicator
Getting Started
Initial Setup:
- Connect the power cord to the speaker's AC power input (5) and plug the other end into a wall outlet.
- Press the System button (4) briefly to turn the speaker ON. The LED status light will pulsate white, indicating pairing mode. If pairing mode does not start automatically, press and hold the System button (4).
- Turn on Bluetooth on your device (phone, tablet, etc.) and pair it with "NATTBAD". A confirmation sound will play, and the LED status light will blink twice upon successful pairing.
Diagram Description: Illustration of a coiled power cord. Diagram showing the power cord being connected to the speaker's power input port (labeled 5), and then the plug being inserted into a wall socket.
Using the NATTBAD Speaker
LED Status Light Indicators:
- Pulsating white: Bluetooth is searching for a device (pairing mode).
- Steady white: Speaker is ON and ready for use.
- Blinking red: Factory reset is in progress.
Adjusting the Volume
Turn the Sound knob (2) counterclockwise to decrease volume or clockwise to increase volume. Volume can also be controlled from the connected device.
Diagram Description: Diagram showing the Sound knob (2) being turned left/right to adjust volume (indicated by volume icons ?/?).
Changing Tracks
- Short press the Sound knob (2) to pause/play ▶️/⏸️ the current track.
- Double press the Sound knob (2) to skip ⏭️ to the next track.
- Triple press the Sound knob (2) to play ⏮️ the previous track.
Spotify Tap™
Spotify Tap™ allows you to resume music playback or change tracks directly from the speaker with a button press.
To start music with Spotify Tap™:
- Download the Spotify app from your device's app store (App Store for iOS, Google Play Store for Android).
- Ensure your device is paired via Bluetooth with the NATTBAD speaker.
- Open the Spotify app (this is only necessary for the first use).
- Press the Spotify Tap™ button (3) to start music.
From then on, a quick press of the Spotify Tap™ button (3) will resume music playback as long as your device is paired and within range.
Changing Music (Spotify Tap™): While music is playing, press the Spotify Tap™ button (3) again to switch to a recommended track.
Diagram Description: Diagram showing the speaker with a finger pressing the Spotify Tap™ button (3), with the Spotify logo and text 'Spotify Tap™'.
Connecting More Speakers (Multi-Speaker Mode)
The NATTBAD speaker supports multi-speaker mode, allowing it to connect with other compatible IKEA speakers to play the same music simultaneously.
- Connect your device to one speaker via Bluetooth ?.
- On another speaker you wish to connect, press and hold the Sound knob (2). The LED status light (1) will blink white twice, and a confirmation sound will be heard. Repeat this for each additional speaker.
Diagram Description: Diagrams illustrating multi-speaker connection: a phone/tablet connecting to a speaker via Bluetooth (? symbol), and then a second speaker being connected by pressing its Sound knob (2). A third diagram shows multiple speakers connected in a chain.
Disconnecting Speakers from Multi-Speaker Mode
To disconnect a speaker, press and hold the System button (4) for more than 1.5 seconds. This will activate pairing mode on that speaker.
Unpairing Bluetooth Devices
To connect a different device, turn off Bluetooth on the currently paired device. The speaker should automatically enter pairing mode. If not, press and hold the System button (4) to manually enter pairing mode.
Factory Reset
If the speaker is not functioning correctly, perform a factory reset. Press and hold the System button (4) for 8 seconds until the LED status light stops blinking red. You will need to re-pair your device after a factory reset.
Safety and Important Information
WARNINGS:
- Overheating Risk: Do not install in confined spaces. Maintain at least 5 mm ventilation space around the product. Do not cover ventilation slots with curtains or other objects.
- Never place the product near open flames or heat sources, including direct sunlight.
- Use indoors only. Avoid exposure to dripping or splashing. Do not place liquid-filled objects (e.g., vases) on the apparatus.
- Do not place on other electrical equipment.
- If the power cord is damaged, replace it with a type-approved cord for your country.
- No open flame sources, like lit candles, should be placed on the device.
- The mains plug or appliance coupler serves as the disconnect device and must remain easily accessible.
IMPORTANT:
- Keep the speaker away from direct sunlight and heat sources to prevent overheating.
- Do not expose to wet, moist, or excessively dusty environments, as this may cause damage.
- Wireless range is measured in open air. Building materials and placement can affect range.
- Listening at high volumes can damage hearing.
- Do not touch acoustic components.
- Do not use the product as a shelf or stand.
- Check the bottom of the product for important markings.
Care Instructions:
Before cleaning, disconnect the speaker from the power outlet. Wipe the surface with a slightly damp cloth. Never submerge the speaker in water. Dry with a soft cloth before reconnecting to power.
Note: Never use abrasive cleaners or chemical solvents, as they can damage the product.
Technical Data
- Manufacturer: IKEA of Sweden AB
- Address: Box 702, SE-343 81 Älmhult, SWEDEN
- Model Name: NATTBAD
- Type number: E2405
- Input: 100-240 VAC, 50-60 Hz
- Standby Power Consumption: 0.3 W
- Rated Power Consumption: 250-140 mA
- Auto Standby: 1 min
- Operating temperatures: 0° C to 40° C (32° F to 104° F)
- Operating humidity: 0 to 95 % RH
- Dimensions (mm): 123 x 92 x 179 mm
- Bluetooth Version: V 5.3
- Wireless range (unobstructed): 10 m
- Operating frequency: 2400 - 2483.5 MHz
Compliance Information
This device complies with Part 15 of the FCC Rules and applicable Innovation, Science and Economic Development Canada licence-exempt RSS standards. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. If interference occurs, try the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a different circuit than the receiver.
- Consult a dealer or qualified radio/TV technician for assistance.
The crossed-out wheeled bin symbol ?️ indicates that the product should be disposed of separately from household waste and recycled according to local environmental regulations. Proper disposal helps reduce waste and minimize negative impacts on health and the environment.
Trademarks
Bluetooth®: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. IKEA uses these marks under license. Other trademarks and trade names are the property of their respective owners.
Spotify Tap™: Spotify Tap™ is a trademark owned by Spotify. IKEA's use of this mark is under license. Other Spotify trademarks, logos, etc., are the exclusive property of Spotify or its licensors.
Made for Apple: Accessories identified with "Made for Apple" badges are designed for specific Apple products and certified by the developer to meet Apple performance standards. Apple is not responsible for the operation or compliance of these accessories.
Importer/Distributor Information (Mexico)
Importer/Distributor: IKEA Supply Mexico, S.A. de C.V., Calle Oriente 158, número 440, Piso 3, Local JD-01, Colonia Moctezuma, Segunda Sección, Alcaldía Venustiano Carranza, C.P. 15530, Ciudad de México. Tel. 55-8310-8310.
Read and follow all safety and operation instructions before using this product. For indoor use only. Consult electrical specifications on product labeling.
