Zyxel NWA90AX Wireless Access Point Quick Start Guide

Introduction

This guide provides instructions for the initial setup and configuration of the Zyxel NWA90AX Wireless Access Point. The NWA90AX is a WiFi 6 access point designed for high-performance wireless networking.

Package Contents

Verify that the following items are included in the package:

• NWA90AX Unit
• Power Adapter
• Ethernet Cable
• Mounting Bracket and Screws
• Quick Start Guide (this document)

Hardware Overview

The NWA90AX features the following ports and indicators:

• Power Port: Connect the power adapter here.
• Ethernet Port (PoE/WAN): Connect to your network switch or router. Supports Power over Ethernet (PoE).
• Reset Button: Press and hold for 10 seconds to restore factory default settings.
• LED Indicators: Indicate power, system status, and WiFi activity.

Hardware Setup

1. Connect Power: Connect the power adapter to the NWA90AX and plug it into a power outlet. Alternatively, if using PoE, connect the Ethernet cable to a PoE-enabled switch.
2. Connect to Network: Connect the Ethernet port of the NWA90AX to your router or network switch using the provided Ethernet cable.
3. Mounting (Optional): If wall-mounting, use the provided bracket and screws to secure the NWA90AX to a wall.

Initial Configuration

You can configure the NWA90AX using the Zyxel Nebula cloud management platform or as a standalone device.

Option 1: Nebula Cloud Management

1. Register Device: Go to the Zyxel Nebula portal (https://nebula.zyxel.com/) and register your NWA90AX using its serial number and MAC address.
2. Create Site: Create a new site or select an existing one within your Nebula organization.
3. Add Device: Add the NWA90AX to your site. The device will automatically download its configuration from the Nebula cloud.

Option 2: Standalone Mode

1. Connect to Management PC: Connect your computer to the NWA90AX via the Ethernet port. Ensure your computer is on the same subnet as the NWA90AX's default IP address (usually 192.168.1.2).
2. Access Web Interface: Open a web browser and enter the default IP address of the NWA90AX.
3. Login: Use the default username and password (refer to the device label or separate documentation for defaults).
4. Configuration Wizard: Follow the on-screen wizard to set up your WiFi network name (SSID), password, and other basic settings.

LED Indicators

Understanding the LED indicators:

• Power LED: Solid green indicates power is on.
• System LED: Blinking green indicates normal operation. Solid or blinking amber may indicate an issue.
• WiFi LED: Solid green indicates WiFi is active. Blinking green indicates WiFi traffic.

Troubleshooting

If you encounter issues:

• Ensure all cables are securely connected.
• Verify the power supply.
• If using PoE, check the switch's PoE capabilities.
• If unable to access the web interface, try resetting the device to factory defaults using the reset button.
• Consult the full user guide on the Zyxel website for more detailed troubleshooting steps.

Support

For further assistance, visit the Zyxel support website at https://www.zyxel.com/support/.