CASIO Module No.

IMPORTANT INFORMATION - READ FIRST

Water Resistance

For all categories of watches, the following are prohibited:

• Pressing buttons underwater;
• Moving the hands underwater;
• Unscrewing the crown underwater.

If the watch is exposed to salt water, rinse it thoroughly and dry it. Do not wear watches with leather straps while swimming. Avoid prolonged contact of leather straps with water.

Watches are classified by levels (from Level I to Level V) according to their water resistance. Check your watch's level using the table below to determine correct usage.

Notes

• Level I: Watches are not water-resistant. Avoid any moisture ingress.
• Level II: WR (Water Resistant) means the model is waterproof according to ISO 2281. Brief contact with water will not cause any problems.
• Level III: With 5 Bar (50 meters) water resistance, the watch can withstand water pressure of the indicated value and can therefore be used while showering and for brief swimming.
• Level IV: 10 Bar (100 meters) water resistance means the watch can be used for normal swimming and snorkeling.
• Level V: 20 Bar (200 meters) water resistance means the watch can be used for scuba diving (except for depths requiring a helium-oxygen mixture).

When using the product in conditions of rapid temperature changes, slight condensation may form on the inside of the glass. This phenomenon is due to the laws of physics and is not a defect.

CASIO COMPUTER CO., LTD. is not responsible for any damage that may arise from the use of this watch, and does not accept any claims from third parties.

General Notes

Your watch may differ slightly from the illustrations in this manual.

Note on Screw-Lock Crowns

• Some water-resistant watch models are equipped with a screw-lock crown.
• To pull out such a crown, you must unlock it by turning it in the direction shown in the illustration [unlock direction arrow]. Do not use excessive force when pulling out the crown. This may cause damage.
• Note that the watch becomes unprotected from water and moisture when the crown is pulled out. After completing all operations using the crown, return it to its original position and lock it.

MODULES 1362, 1398, 1770, 2799, 3378, 4370

Setting the Current Time

Pull out the crown. Turn it to set the hands to the current time. Push the crown back to its original position.

Illustration showing a watch with a crown.

MODULES 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 1782, 4328, 4394, 4747, 5049, 5284, 5361, 5364, 5375

Setting the Current Time

1. When the second hand is at the 12 o'clock position, pull out the crown. The second hand will stop.
2. Turn the crown to set the hands to the current time, set the minute hand 4-5 minutes ahead of the current time, and then move it back.
3. Close and secure the crown.

Illustrations showing watch dials and crown positions for setting time. The module numbers 5284, 5361, 5364, 5375 are indicated.

MODULES 707, 708, 1331, 1332, 1335, 1336, 1342, 1345, 1346, 1369, 1370, 1373, 1701, 1710, 1711, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, 4393, 5025, 5044, 5058, 5116, 5128, 5180, 5199, 5206, 5207, 5218, 5250, 5340, 5341, 5342, 5343, 5352, 5358, 5383, 5393, 5436, 5507, 5532

Setting the Current Time

1. When the second hand is at the 12 o'clock position, pull out the crown. The second hand will stop.
2. Turn the crown to set the hands to the current time. For more precise setting of the current time, move the minute hand back 4-5 minutes from the desired position, then return it to the current value.
3. Push the crown back to its original position to resume time display.

Setting the Date

• To ensure the date changes at midnight, do not set the date between 8:00 PM and 2:00 AM.
• Pull out the crown to the first click [date setting].
• Turn it to set the desired date.
• Push the crown back to its original position.

Illustration showing watch crown positions: Normal position, First click for date setting, Second click for time setting. A date display showing '30' is also illustrated. The module numbers 5128, 5180, 5199, 5206, 5207, 5218, 5250, 5340, 5341, 5342, 5343, 5352, 5358, 5383, 5393, 5436, 5507, 5532 are indicated.

MODULES 709, 1309, 1333, 1334, 1347, 3716, 5125, 5167, 5223, 5237, 5249, 5339, 5373, 5458, 5474

Setting the Current Time

1. When the second hand is at the 12 o'clock position, pull out the crown. The second hand will stop.
2. Turn the crown to set the hands to the current time. For more precise setting of the current time, move the minute hand back 4-5 minutes from the desired position, then return it to the current value.
3. Push the crown back to its original position to resume time display.

Setting the Date and Day of the Week

• To ensure the date and day of the week change at midnight, do not set the date between 8:00 PM and 2:00 AM.
• Pull out the crown to the first click [date and day of week setting].
• Set the date by turning the crown counter-clockwise.
• Set the day of the week by turning the crown clockwise. Days of the week are indicated in English or Spanish.

Push the crown back to its original position.

Illustrations show watch dials with crown positions for date/day setting. Indicators like 'SUN 30' and 'WED 30' are shown. The module numbers 709, 1333, 1347, 3716 are indicated for one illustration, and other module numbers are listed separately.

WATCHES WITH ILLUMINATION

• Press and hold button L [illumination button emoji ?] to illuminate the watch face.
• Depending on the watch model, the illumination duration is 2 to 3 seconds or 1 second.
• Electroluminescent (EL) elements that provide illumination lose power after prolonged use.
• Frequent use of illumination shortens battery life.
• Illuminating for extended periods or with a low battery charge may cause the watch hands to stop moving for a while.

Illustrations show watches with the 'L' button indicated for illumination.

WATCHES WITH A ROTATING BEZEL

Rotate the bezel to align the mark [triangle symbol ▽] with the minute hand. After some time, you can tell how much time has passed since you aligned the mark with the minute hand.

Illustration of a watch with a rotating bezel, showing markings for time measurement.

TECHNICAL SPECIFICATIONS

PRODUCT INFORMATION

Product Name: Electronic / Electro-mechanical Quartz Wristwatch (Men's/Women's)

Brand: CASIO

Manufacturer: CASIO COMPUTER Co.,Ltd. (CASIO Computer Co., Ltd.)

Manufacturer Address: 1-6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Importer: OOO "Casio", 127015, Russia, Moscow, ul. Butyrskaya, d. 77

Warranty Period: 2 years

Address of Authorized Organization for Claims: Indicated on the warranty card