Technical Data
| Parameter | Specification |
|---|---|
| MODEL | VT-1193 |
| SKU | 23032, 23033 |
| LUMENS | 95 Lm |
| LED WATTS | 0.5 W |
| COLOR TEMPERATURE | 3000K |
| SOLAR PANEL | DC 5.5V, 1W Monocrystalline |
| BATTERY | 2200mAh, Li-Ion, DC: 3.7V |
| CHARGING TIME | 11-13 Hours |
| WORKING TIME | 18-20 Hours |
| SENSOR TYPE | PIR Sensor |
| SENSOR DEGREE | 50° |
| DIMENSION | 126x83x252mm |
| MATERIAL | Aluminium+PC |
WEEE Number: 80133970
Rating: IP54
Warranty: 2 Year
Introduction & Warranty
Thank you for selecting and buying a V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact your dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
Multi-Language Manual: Please scan the QR code to access the manual in multiple languages.
In case of any query/issue with the product, please reach out to V-TAC EUROPE LTD. at: support@v-tac.eu. For more product range inquiries, please contact your distributor or nearest dealers. V-TAC EUROPE LTD. is located at Bulgaria, Plovdiv 4000, bul. L. Karavelow 9B.
Warnings
1. Please make sure to turn off the power before starting the installation.
2. Installation should be done by a certified electrician.
3. The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
Disposal Information: This marking indicates that this product should not be disposed of with other household wastes. [Recycling symbol indicating separate collection] ♻️
Installation Diagram
Step 1: Shows a mounting plate with an arrow indicating "UP".
Step 2: Illustrates attaching the mounting plate to a wall using screws and plastic expansion bolts.
Step 3: Depicts aligning the lamp body with the mounted plate, with an "UP" indicator on the plate.
Step 4: Shows securing the lamp body to the plate with screws.
Step 5: Illustrates the sensor's detection area, showing a 50° angle and a range of 3-4 meters from the light fixture.
Installation Instruction
- Drill two holes on the wall and insert two plastic expansion bolts in it.
- Fix the metal plate on the plastic expansion piece with self-tapping screws.
- Fix the lamp body on the plate and tighten the screws.
- Switch on.
Function of Sensor
- Press the switch to turn on.
- The light turns to 100% brightness when motion is detected and dims to 10% light when people move away.
- The light turns off automatically after a period of inactivity.
Maintenance & Warning
- Do not use solvents, petrol, etc., as this may damage the light.
- Clean the light with a dry, lint-free cloth.
- Check the solar panel for dirt regularly. If dirt is present, remove it to guarantee flawless function of the product.
- Especially during winter, keep the product free from snow and ice.
- Confirm the installation direction is correct (the solar panel should be at the top).
- Confirm no objects are blocking the solar panel from receiving sunlight.
- Keep away from fire.
- Do not immerse the product in water.
