V-TAC Solar LED Wall Light with Sensor

Introduction

Thank you for selecting and buying a V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other query, please contact your dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

♻️ This marking indicates that this product should not be disposed of with other household wastes.

⚡ Caution, risk of electric shock.

Multi-Language Manual QR Code: Please scan the QR code [?] to access the manual in multiple languages.

In case of any query/issue with the product, please reach out to us at: support@v-tac.eu

For More products range, inquiry please contact our distributor or nearest dealers.

V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

Technical Data

Warning

1. This is a solar powered lamp; please install the solar panel in a location where it can get enough sunshine.
2. Please note the lighting time depends on sunshine duration & working mode.
3. The On/Off button on the lamp is a power-off switch, helpful to save power consumption. Also, the lamp can still get solar charge during the day when the lamp is turned off.
4. Built-in intelligent IC provides over-charge and over-discharge protection, making it safe & durable.
5. The lamp is equipped with an internal battery pack, which is replaceable. If any need arises, please contact the seller for a correct new battery pack.
6. Non-professionals, please do not disassemble the lamp.
7. Please do not dispose of the battery with household garbage to avoid explosion.

Certifications: ROHS, CE, UK CA, PAP 20

Two Optional Working Modes

The light features two primary modes controlled by a single button, plus a separate button for color temperature.

ON/OFF/Switch Woke Mode

This button controls the power and switches between working modes:

• 1st Press: Lamp flashes once and turns on to Sensor Mode.
• 2nd Press: Lamp flashes twice and turns to Keep Lighting Mode.
• 3rd Press: Lamp turns off.

Switch Lighting CCT

Please press this button to switch the color temperature.

Sensor Mode

Description: Lamp automatically lights up at night. When motion is detected within the range of ≤8 meters, it turns to 60% brightness. After 20 seconds of no motion, it dims to a lower brightness.

[Diagram illustrating Sensor Mode: Shows a person walking towards a light, triggering it. Then shows the person moving away and the light dimming.]

Keep Lighting Mode

Description: Lamp automatically lights up at night and maintains full brightness. After 5 hours, it automatically switches to Sensor Mode.

[Diagram illustrating Keep Lighting Mode: Shows the light at full brightness, then after 5 hours, it transitions to a different state, with a person walking triggering it.]

Wide Application

This solar light is flexibly used for various outdoor locations including:

• Yard
• Garage
• Warehouse
• Garden
• Holiday Resort
• Farm
• Industrial Park
• And more...

Installation

Wall Light Installation

Components: 1x Lamp, 1x Base, 4x Expansion Plugs & Screws, 1x Anti-theft Screw, 1x User Manual.

[Diagram showing Wall Light components and installation steps.]

1. Drill 4 holes with a diameter of 6mm and a depth of 45mm. Fix the expansion plugs into the holes, then attach the base to the wall using screws (M4*40mm).
2. Press the larger button on the lamp to turn it on and select the desired work mode. Press the smaller button to select the desired lighting color.
3. Slide the lamp onto the base.
4. Tighten the anti-theft screw (M3*25mm) to secure the lamp to the base.

[Diagram illustrating the Wall Light installation steps: 1. Drilling and mounting the base. 2. Showing the lamp buttons. 3. Sliding the lamp onto the base. 4. Securing with the anti-theft screw.]

Pillar Light Installation

Components: 1x Lamp, 1x Base, 3x Expansion Plugs & Screws, 1x User Manual.

[Diagram showing Pillar Light components and installation steps.]

[Diagram illustrating the Pillar Light installation steps: Similar to Wall Light installation, involving drilling, mounting the base, attaching the lamp, and securing it.]

Garden Light Installation

Before Installation Note: PLEASE NOTE THE RADAR [motion sensor] [?] SHOULD BE TOWARD THE DESIRED AREA TO BE SENSED.

Components: 1x Lamp, 1x Pole & 1x Base, 3x Screws, 1x User Manual.

[Diagram showing Garden Light components and initial base mounting steps.]

1. Drill 3 holes with a diameter of 8mm and a depth of 65mm. Fix the expansion plugs into the holes, then lock the base with screws (M5*55mm).
2. Press the larger button on the lamp to turn it on and select the desired work mode. Press the smaller button to select the desired lighting color.
3. Insert the lamp into the clamping slot and rotate it clockwise to fix it well.

Before Installation Note: PLEASE NOTE THE RADAR [motion sensor] [?] SHOULD BE TOWARD THE DESIRED AREA TO BE SENSED.

Components: 1x Lamp, 1x Pole & 1x Base, 3x Screws, 1x User Manual.

[Diagram showing Garden Light pole installation steps.]

4. Drill 3 holes with a diameter of 8mm and a depth of 65mm. Fix the expansion bolts into the holes, then lock the base on the ground with flat washers, spring washers, and nuts.
5. Press the larger button on the lamp to turn it on and select the desired work mode. Press the smaller button to select the desired lighting color.
6. Insert the lamp into the pole with the correct direction, and fix it with a screw (M4*8mm).
7. Insert the pole (with the lamp installed) into the base, and then fix it with 3 screws (M5*10mm).

[Diagram illustrating the Garden Light pole installation steps: 1. Drilling and mounting the base. 2. Showing the lamp buttons. 3. Attaching lamp to pole. 4. Inserting pole into base and securing.]