AUTOPHIX 9500 Multi-System Scanner User Manual
Safety Precautions
To prevent personal injury or damage to the vehicle and/or the scanning tool, please read this user manual first and observe the following safety precautions during each operation on the vehicle:
- Always perform vehicle testing in a safe environment.
- Do not attempt to operate or observe the tool while driving. Operating or observing the tool distracts the driver and may cause a fatal accident.
- Use eye protection that complies with ANSI standards.
- Work with the vehicle in a well-ventilated workspace: Exhaust fumes are poisonous.
- Shift the transmission to PARK (for automatic transmission) or NEUTRAL (for manual transmission) and ensure the parking brake is engaged.
- Keep the scanning tool dry, clean, and free of oil/water or grease. If necessary, clean the scanning tool exterior with a mild detergent on a clean cloth.
Tip: When using the product, plug it into the socket before starting the vehicle.
About the 9500
Coverage
The 9500 works on most American, European, and Asian OBDII-compatible vehicles manufactured after 1996.
1999-2021 Hyundai: Supports most Hyundai vehicles with a 16PIN OBD interface and 12V power supply. Examples include Accent (HC), Accent(HC)-U.S., Accent/Verna(HCI), Accent(LC), Accent (MC), Accent(RB), Accent/Solaris(RBr), Accent/Solaris(HCR), Atos Prime(MXL), Atos(MX), Atos(MXI)-PDF, Creta(GS), Creta(GSB), Creta(GSR), Creta(SU2I), Centennial(LZ), Equus/Centennial(VI), Elantra Coupe(JK), Elantra(AD), Elantra(ADA), Elantra(ADI), Elantra(CN7), Elantra(HD), Elantra(MD), Elantra(MDI), Elantra(UD), Elantra(XD), Eon(HA), G70(IK), G70(IK)-U.S., G80(DH), G80(DH)-USA, G80(RG3), GV80(JX1), G90(HI), G90(HI)-USA, Genesis Coupe(BK), Genesis Coupe(BK Genesis(BH), Genesis(BH US)-USA, Genesis(DH) Getz(TB), Grand i10 Nios/Aura(A13), Grand i10/Xcent(BA), Grand Santafe(NC), Grandeur(XG), Grandeur/Azera(HG), Grandeur/Azera(IG), Grandeur/Azera(TG), H-1 Truck(SR), H-1(A1), H-1/iMAX/iLOAD(TQ), H-100 TRUCK(HR), H350(EU), HB20(HB), HB20(BR2), HD Coupe(GK), i10(IA), i10(PA), i10(AC3), i20(GB), i20(IB), i20(PB), i20(BC3), i30(FDe), i30(GD), i30(GDe), i30(PD), i30(PDE), i30N(PDEN), i30/Elantra Neos(FD), i40(VF), IONIQ Electric(AE EV), IONIQ Hybrid(AE HEV), IONIQ Phev(AE PHEV), ix20(JC), ix35 FCEV(LM FCEV), ix35(EL), Kona(OS), Kona Electric(OS EV), Kona Electric(OSe EV), Kona Electric(OSI EV), Kona Hybrid(OS HEV), Matrix(FC), Nexo(FE), Palisade(LX2), Reina(CB), Santafe(TM), Santafe(TMA), Santro(AH2), Santafe Sport(DMA), Santafe(CM), Santafe(DM), Santafe(DMI), Santafe(SM), Sonata Hybrid(LF HEV), Sonata Hybrid(LF HEV)-USA, Sonata Hybrid(YF HEV), Sonata Hybrid(YF HEV)-USA, Sonata Hybrid(YF HEV US)-U.S., Sonata(DN8), Sonata Hybrid(DN8 HEV), Sonata(DN8A)-pro Mexiko, Sonata(EF), Sonata(LF), Sonata(LFA), Sonata(NF), Sonata(YFI), Sonata (YFA)-USA, Sonata/i45(YF), Terracan(HP), Trajet XG(F0), Tucson FFV(JM FFV), Tucson(JM), Tucson (LM)-BRAZIL, Tucson/ix35(LM), Tucson (TL), Tucson (TLe), Tucson (TLI), Veloster(FS), Veracruz/ix55(EN), Verna(RBI), Veloster N(JSN), Veloster(JS), Venue(QX), Venue(QXI), Accent(HC), Accent(RB), Accent(MC), Přízvuk(LC), Azera(HG), Azera(TG), Elantra(AD), Elantra(ADA), Elantra GT(PD), Elantra(MD).
2000-2021 KIA:
Supports most KIA vehicles with a 16PIN OBD interface and 12V power supply. Examples include Besta(TP), Cadenza (VG), Cadenza (YG), Carens (FJ), Carens (UN), Carens/Rondo(RP), Carnival/Sedona (GQ), Carnival/Sedona (VQ), Carnival/Sedona (YP), Carnival (YP) - Israel Carnival(YPI), Cee'd(ED), Cee'd(JD), Cee'd (CD), Ceed PHEV(CD PHEV), Ceed(CD) - ProCeed (Shooting Brake), Ceed(CD) - Sportswagon, Cerato/Forte(BD), Cerato/Forte(BDm), Cerato(LD), Cerato/Forte(TD), Cerato/Forte(YD), Cerato/Forte(YDm), K900(RJ), K2500/K2700/K3000/K3000S(PU), K5 HEV(DL3 HEV)- K5 (DL3), Mohave/Borrego (HM), Niro(DE HEV), Niro(DE HEV)-pro Mexiko, Niro(DE EV), Niro(DE PHEV), Niro(DE PHEV)-pro Mexiko, Opirus(GH), Optima HEV(JF HEV)- Optima PHEV(JF PHEV), Optima (JF), Optima(JFA) - Pro Střední a Jižní Ameriku, Optima(QF)-Pro Střední a Jižní Ameriku, Optima HEV(TF HEV), Optima(TF), Optima/Magentis(MG), Optima/Magentis(MS), Pegas/Soluto (AB), Picanto(SA), Picanto (TA), Picanto/Morning(JA), Pregio (FP), Quoris(KH), RIO(BC), RIO(JB), RIO(QBR), RIO(UB), RIO(FB), RIO(SC), RIO(YB), Seltos(SP2), Seltos(SP2i), Sephia (FB12), Shuma/Spectra(SD), Sorento(BL), Sorento (UM), Sorento(XM), Sorento (UMA)-pro Střední a Jižní Ameriku, Sorento(XMA)-pro Střední a Jižní Ameriku, Soul EV(SK3 EV), Soul EV(SK3 EV)-pro Mexiko, Soul(SK3), Soul(SK3)-Pro Mexiko, Soul(SK3A), Soul EV(PS EV), Soul(AM), Soul(PS), Soul(PS)-pro Mexiko, Sportage(KM), Sportage(SL), Sportage(SLE), Sportage(QL), Sportage(QL)-pro Mexiko, Sportage(QLE), Sportage(QLE)-Pro Mexiko, Stinger(CK), Stonic(YB CUV), Telluride(ON), Telluride(ON)-pro Mexiko, Venga(YN), XCeed PHEV(CD CUV PHEV), XCeed(CD CUV), Amanti(GH), Borrego(HM), Cadenza (VG), Cadenza(YG), Forte(BDm), Forte(YD), Forte (YDm), Forte/Forte Koup(TD), Forte(BD), K5(DL3A), K900(RJ), K900(KH), Niro(DE EV), Niro(DE HEV), Niro(DE PHEV), Optima Hybrid (JF HEV), Optima Hybrid(TF HEV), Optima PHEV(JF PHEV), Optima(JF), Optima (JFA), Optima(MG), Optima (MS), Optima(TF/QF), RIO(BC), RIO(JB), RIO(SC), RIO(UB), Rondo(UN), Sedona(GQ), Sedona(VQ), Sedona (YP), Sephia(FB), Sorento(BL), Sorento (UMA), Sorento(XM), Seltos(SP2), Soul EV (PS EV), Soul EV(SK3 EV), Soul(AM), Soul(PS), Soul(SK3), Spectra(LD), Spectra(SD), Sportage(AL), Sportage(KM), Sportage(QL), Sportage(SL), Stinger(CK), Telluride(ON).
Product Specifications
- 2.8" LCD display, 320 x 240 pixels, color screen
- Operating voltage: 8V-18V
- Operating temperature: 0-60 "C (32-140 "F)
- Storage temperature: -20-70°C (-4-158°F)
Appearance and Button Description
The AUTOPHIX 9500 scanner features a clear LCD display and intuitive buttons for navigation and operation.
1. LCD DISPLAY: Shows test results. Backlit display with a resolution of 320 x 240 pixels.
2. [OK] BUTTON: Confirms selection (or action) from the menu.
3. [ESC] BUTTON: Cancels selection (or action) from the menu or returns to the previous menu.
4. [LEFT] SCROLL BUTTON: In menu mode, moves left through menus and submenus. When scrolling through data interface, the left button can be used to go to the previous screen.
5. [RIGHT] SCROLL BUTTON: In menu mode, moves right through menu items and submenus. When scrolling through data interface, the right button can be used to go to the next screen.
6. [UP] SCROLL BUTTON: In menu mode, moves up through menu items and submenus. When loading data for more than one screen, scroll up to the previous screen for more data.
7. [DOWN] SCROLL BUTTON: In menu mode, moves down through menu items and submenus. When loading data for more than one screen, scroll down to the next screen for more data.
8. OBD-16PIN CONNECTOR: Connects the scanning tool to the vehicle's Data Link Connector (DLC).
9. [I/M] BUTTON: Quick check of emission readiness status and verification of the drive cycle.
10. [READ DTC] BUTTON: Quick reading of vehicle fault codes.
I/M Readiness Status:
- MIS: Jiskra (Spark)
- CCM:
- CAT:
- HCAT:
- EVAP:
- AIR:
- O2S:
- HTR:
- EGR:
Notes: MIL Yellow - Dashboard MIL ON; MIL Gray - Dashboard MIL OFF @ - not supported; - complete; Y - not complete.
Operation Instructions
Connect 9500
- Turn on the ignition.
- Locate the 16-pin Data Link Connector (DLC) in the vehicle.
9500 Functions
For Hyundai KIA
This product primarily tests Hyundai and KIA brands. Select [For Hyundai KIA] to display the following:
Select Vehicle Brand:
- OBDII
- Pro Hyundai
- Oil Reset
- Record Last Test
- Pro Hyundai Diagnose
- Pro KIA Diagnose
General Area:
- Area: USA
Manual Selection:
- Year Selection: 2011, 2010, 2009, 2008, 2007, 2006
- Manual Select: G 1.6 DOHC, G 1.4 DOHC, D 1.5 TCI-U
Health Report
Special Functions
Control Units
Press [OK] to continue, press [Health Report] to display the following images:
Scanning... [58%]
- ECM (Engine Control Module)...
- ECM (Engine Control Module)...
- ECM (Engine Control Module)...
- ECM (Engine Control Module)...
- Anti-Lock Brake(MGM -25)
Select System:
- ECM (Engine Control Module)...
- ECM (Engine Control Module)...
- ECM (Engine Control Module)...
- ECM (Engine Control Module)...
- IMM (Immobilizer)
Press the [Control Units] button to display the following:
Manual Selection
- Special Functions
- Control Units
- Status Report
Manual Selection
- ECM (Engine Control Module)
- TCM (Transmission Control Mo... ABS (Anti-lock Braking System)
- SRS (Supplemental Restraint System)...
- AC (Air Conditioning)
- EPS (Electric Power Steering) IMM (Immobilizer)
Press the [Special Functions] button to display the following:
Manual Selection
- Status Report
- Control Units
- Special Functions
Special Functions
- Reset Adaptive Values
- Reset Automatic Values
- T/A Air Bleed Mode
- HCU
Note: Special functions supported vary by model.
Commonly Used Special Functions:
- ETC reset
- EPB Brake Pad Replacement
- Transmission Adaptation
- SAS
- Oil Reset
- Reset TPMS
- IQA
- ABS
- Reset BMS
- Reset EGR
We will explain two of the special functions below.
2.2.1 Service Reminder Setting
Press the [Special Functions] button and navigate to [Service Reminder Setting]. Follow the on-screen prompts to complete the service reminder settings. The specific steps are as follows:
Manual Selection
- Status Report
- Control Units
- Special Functions
Special Functions
- Service Reminder Setting
- Reset Adaptive Values
- Steering Angle Sensor Calibration...
- Reset Automatic Values
- T/A
- HCU Air Bleed Mode Write
- Wheel Speed Sensor ID Write Mode AT
Service Reminder Setting
Are you sure you want to perform this function? Press [OK] to continue and [ESC] to exit.
Service Reminder Setting
Set the period.
Service Reminder Setting
Distance (current): 10000 [KM] Period (current): 7 [months] Press [OK] to continue.
B-[Manual Input] is Custom Input
Set Distance:
- 10000KM
- 30000KM
- 60000KM
- Manual Input
Set Distance:
- 10000KM
- 30000KM
- 60000KM
- Manual Input
Enter distance 0-99999:
12345ABCDEFGHIW 67890JKLMNOPQR +-/STUVWXYZ+u
[Next Step] [I/M:Scroll Text]
Set Period:
A-[6 months]. [J 2 months]. [J 8 months] is a shortened input.
Set Distance
- 6 months
- 12 months
- 18 months
- Manual Input
Set Distance
- 6 months
- 12 months
- 18 months
- Manual Input
Enter period 0-99:
1 223 4544 B CADEEEGHE GHI 677889 16 M N O P Q R OPQRA * SUVWXYZ
[Next Step] [I/M:Scroll Text]
The mileage and period adaptation is complete.
[Reset] for direct reset
Set Period
The function is completed.
[OK] [ESC]
Service Reminder Setting
Are you sure you want to perform this function? Press [OK] to continue and [ESC] to exit.
[OK] [ESC]
Maintenance reset completed.
Note: The above data is the main content for resetting the oil maintenance light; please follow the steps above.
2.2.2 Reset Adaptive Values
Press the [Special Functions] button and navigate to [Resetting Adaptive Values]. Follow the on-screen prompts to complete the reset of adaptive values. The specific steps are shown in the image below:
Special Functions
- Service Reminder Setting
- Reset Adaptive Values
- Steering Angle Sensor Calibration...
- Reset Automatic Values
- T/A
- HCU Air Bleed Mode Write
- Wheel Speed Sensor ID Write
Reset Adaptive Values
- [Conditions]
- 1. Ignition switch ON
- 2. Engine OFF
Reset Adaptive Values
Are you sure?
[Conditions: ignition ON, engine running]
[OK] [ESC]
Reset Adaptive Values
The function is completed.
[OK] [ESC]
Note: Special functions vary by model, please refer to the actual operation.
OBDII System
Read Codes
Use the UP/DOWN scroll buttons in the diagnostic menu to select Read Codes and press the [OK] button.
Diagnostic Menu:
- Read Codes
- Erase Codes
- I/M Readiness
- Data Stream
- Evaporative System Test
- Vehicle Information
If there are no diagnostic trouble codes, the display will show the message "No diagnostic (pending) codes are stored in the module!". Wait a few seconds or press any button to return to the diagnostic menu.
Display DTC and their definitions on the screen.
DTC
- P01 43 General
- 02 Low Voltage Sensor Circuit
- Bank 1 Sensor 3
[OK] [ESC]
The control module number, DTC sequence, total number of detected codes, and code type (Generic or Manufacturer specific) will be displayed in the upper right corner of the screen.
Erase Codes
Notes: This function is performed with the engine off. Do not start the engine. Before performing this function, ensure you have read and recorded the fault codes. After erasing, you need to re-read the fault codes or turn on the ignition and re-read the codes. If some fault codes for severe faults still occur, first find the cause that caused the fault code, and then solve the problem. Fault codes can now be erased.
Use the UP/DOWN scroll buttons in the diagnostic menu to select Erase Codes and press the [OK] button.
Diagnostic Menu:
- Read Codes
- Erase Codes
- Data Stream
- I/M Readiness
- Evaporative System Test
- Vehicle Information
A warning message asking for confirmation will be displayed.
Erase Codes
Erase/reset emission-related diagnostic information. Are you sure?
[OK] [ESC]
Confirm by pressing the [OK] button.
Erase Codes
Turn on the ignition with the engine off, press OK to continue!
Erase Codes
Emission-related diagnostic information has been erased!
[OK] [ESC]
I/M Readiness
I/M stands for Inspection and Maintenance, which is legislatively mandated by the government to meet federal air purity standards. I/M Readiness indicates whether various emission-related systems on the vehicle are functioning correctly and are ready for Inspection and Maintenance tests. The I/M Readiness Status Monitor function can also be used (after repairing a fault) to confirm that the repair was performed correctly and/or to check the status of the monitor.
Diagnostic Menu:
- Read Codes
- Erase Codes
- I/M Readiness
- Data Stream
- Evaporative System Test
- Vehicle Information
I/M Readiness
- Current Status
- Status Since DTC Clear
Data Stream
The OBDII scan tool is a special diagnostic tool that communicates with the vehicle's computer. The Scan Tool allows you to view live data in "real time". This information includes values (volts, RPM, temperature, speed, etc.) and system status information (open loop, closed loop, fuel system status, etc.) generated by various sensors, switches, and actuators of the vehicle. Press the OK button.
Diagnostic Menu:
- Read Codes
- Erase Codes
- Data Stream
- I/M Readiness
- Evaporative System Test
- Vehicle Information
Datastream
- View All Items
- Select Items
Evaporative System Test
This function allows setting the conditions required for an evaporative system leak test, but does not actually perform the test. The vehicle manufacturer is responsible for setting the criteria for automatic test termination. Before performing this function, refer to the vehicle's repair service manual to determine the necessary procedures.
Diagnostic Menu:
- Read Codes
- Erase Codes
- I/M Readiness
- Data Stream
- Evaporative System Test
- Vehicle Information
Evaporative System Test
Evaporative system leak test is not supported.
Vehicle Information
Select [Vehicle Information] and press [OK]. The screen will display information such as VIN (Vehicle Identification Number), CID (Calibration ID), and CVN (Calibration verify number).
Diagnostic Menu:
- Read Codes
- Erase Codes
- I/M Readiness
- Data Stream
- Evaporative System Test
- Vehicle Information
Vehicle Information
- Vehicle Identification Number (VIN): LVSFBFAC94F020950
- Calibration Identification (CID): 000007550753
- Calibration Verification Numbers (CVN): B5073064
[OK] [ESC]
Tool Setup
Language
Select [Language] to display the following:
Tool Setup (Tool Settings)
- Language
- Beeper
- Instructions (Display on startup)
- Unit of Measure
- Skin Style
- Device Information
Language
- English
- Deutsch
- Français
- Español
- Italiano
- Русский
- Português
Beeper
Select [Beeper] to display the following:
Tool Setup (Tool Settings)
- Language
- Beeper
- Instructions (Display on startup)
- Unit of Measure
- Skin Style
- Device Information
Beeper
- OFF
- ON
Instructions (Display on startup)
Select [Instructions (Display on startup)] to display the following:
Tool Setup (Tool Settings)
- Language
- Beeper
- Instructions (Display on startup)
- Unit of Measure
- Skin Style
- Device Information
Instructions (Display on startup)
- OFF
- ON
Unit of Measure
Select [Unit of measure] to display the following:
Tool Setup (Tool Settings)
- Language
- Beeper
- Instructions (Display on startup)
- Unit of Measure
- Skin Style
- Device Information
Unit of Measure
- Metric
- Imperial
Skin Style
Select [Skin Style] to display the following:
Tool Setup (Tool Settings)
- Language
- Beeper
- Instructions (Display on startup)
- Unit of Measure
- Skin Style
- Device Information
Skin Style
- Sky Blue
- Gem Blue
Device Information
Select [Device Information] to display the following:
Tool Setup (Tool Settings)
- Language
- Beeper
- Instructions (Display on startup)
- Unit of Measure
- Skin Style
- Device Information
Device Information
- Software Version: 01.62.000
- Hardware Version: 01.40.000
- Serial Number: Autophix201803 0000001
Feedback and Update
If you encounter any issues during the testing process, you can send us a feedback document.
Please download the update file to your computer from the AUTOPHIX website. The device is connected to the computer via a USB cable.
Select the "Update" file to display the following text:
- @bin
- driver
- README.txt
- Update.exe
Click on "Feedback" to display the following text:
Device upgrades
Send the feedback.bin file to support@autophix.com. If you need to update, please pay attention to the following information:
- When updating the device software, only Windows 7/8/10/11 systems are supported.
- It can be updated directly in Window8 and windowJ O/J J systems.
- If the computer is a windowT system, the device driver is installed on the computer.
Note: The update software only supports Windows 7/8/10/11 systems, but does not support Windows XP and MacOS. If you do not understand the update steps in the instructions, please contact us.
Warranty
AUTOPHIX provides customers with a 24-month warranty from the date of purchase. Please refer to our warranty policy and terms. http://www.autophix.com/en/support/warranty.html
Service Procedures
For any inquiries, please contact your local dealer, distributor, or visit our website at www.autophix.com.
If the scanning tool needs to be returned for repair, please contact your local distributor for further information.
ATTENTION: The automotive brand logos and vehicle brand names mentioned above are not indicative of the product's source. They are used to describe the compatibility of the product with one or more specific vehicles. This scanner is not affiliated with the brands mentioned. This scanner only works for the brands listed above. All rights are reserved by their respective owners.
