SONOFF S31 Lite zb

Operating Instruction

1. Download the APP

Please refer to the user guide of hub to download the corresponding APP, below platforms are recommended:

• [SmartThings icon] SmartThings
• [Amazon Alexa icon] Amazon Alexa

2. Hub connection

Set the hub according to user guide.

Diagram showing a generic hub device.

Support ZigBee hubs as follow: Echo Studio, Echo Plus (model: ZE39KL), 2nd Gen Echo Show (model: DW84JL), 2nd Gen Echo Plus (model: L9D29R), Samsung SmartThings hub

If the connection fails, please move the hub closer to your phone and try again.

3. Power on

A US-style smart plug with two outlets.

After powering on, the device will enter the pairing mode during the first use and the LED signal indicator flashes.

The device will exit the pairing mode if no next operation for a long time. If enter again, please long press the manual switch for 5s until the LED signal indicator flashes and release.

4. Add the device

Add devices according to the prompt on the APP, note that you should choose eWeLink or SONOFF.

Diagram of the smart plug showing a configuration button/manual switch, an On/Off LED indicator (red), and an LED signal indicator (blue).

Specifications

Product Introduction

Diagram of the smart plug showing a configuration button/manual switch, an On/Off LED indicator (red), and an LED signal indicator (blue).

LIKE IT!

Glad to know you are satisfied with SONOFF products. It would mean a lot to us if you can take a minute to share your buying experience.

• [Amazon icon] Share it on Amazon
• [Social media icon] Share it on your social media
• [Friends/Family icon] Share it with your friends and family

Get the latest news by following us:

• New arrival
• Promotion
• How-to videos

HAVE A PROBLEM?

We are so sorry for the inconvenience caused by the product. Please contact us for help via the email address below.

support@itead.cc

We will get back to you as soon as possible.

• [YouTube icon] YouTube
• [Facebook icon] Facebook

Features

S31 Lite zb is a smart Plug that adopts ZigBee wireless protocol and connect to your internet through the ZigBee hub. You can turn on/off, schedule on/off and share the device with your family to control together and so on.

• [Remote control icon] Remote Control
• [Timing schedule icon] Timing Schedule
• [Voice control icon] Voice Control
• [Share control icon] Share Control
• [Smart scene icon] Smart Scene
• [LAN control icon] LAN Control

Factory Reset

Long press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters pairing mode.

If pair the device with hub again, please reset the device to factory default.

Diagram illustrating a hand pressing a button.

FCC Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Additional Information

[QR code] Scan to read voice control instructions for Amazon Echo.

[QR code] Scan or visit https://www.sonoff.tech/usermanuals to check the latest user manual.

Shenzhen Sonoff Technologies Co., Ltd.
Room 1001, 10F, Building 8, Lianhua Industrial Park, Longyuan Road, Longhua District, Shenzhen, GD, China

https://sonoff.tech

MADE IN CHINA

[Home icon] [Plug icon] [Lightbulb icon] [Shield icon]

Manual Details

Material: S31 Lite zb Manual. Paper: 105g copper plate paper, four-color printing, accordion 5-fold. Unfolded size: 225x75mm. Folded size: 45x75mm.