ikan ELE-LBP (EV2) Adjustable Camcorder Baseplate
QUICKSTART GUIDE
Whats included
Component Listing:
- 2 x Riser Plate (ELE-LBP-02)
- 2 x Rod Clamp (ELE-LBP-01)
- 1 x Large Camera Plate (ELE-LBP-04)
- 1 x Large Tripod Plate (ELE-LBP-03)
- Pair of 12" 15mm Rod (ELE-15R12)
- 4 x Thumb Screw Nut (Ikan-TS)
- D-Ring Screws (DRS-01)
- Non-Skid Cork
Checked by
CONDITIONS OF WARRANTY SERVICE
- Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
- The components and maintenance service fee will be charged if the warranty period has expired.
Free Service will not be Provided in the Following Situations: (** Even if the product is still within the warranty period.)
- Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
- Damage caused by natural disaster, abnormal voltage, and environmental factors etc.
ADJUSTMENT POINTS
Numerous Adjustment Points allow for precise positioning modifications.
- Loosen Thumb Screws to move forward/backwards along 12" Rods.
- Loosen Hex Screws to make vertical and horizontal adjustments.
A diagram shows the baseplate on 12" rods with arrows indicating forward/backward movement via red thumb screws and vertical/horizontal adjustment via red hex screws.
Two smaller diagrams illustrate adjustments:
- 'Adjustable Left and Right' shows the baseplate mounted on rods with arrows indicating side-to-side movement.
- 'Adjustable Up and Down' shows the baseplate with arrows indicating vertical movement.
QUICK RELEASE MOUNTING OPTIONS
The ELE-LBP is compatible with both the Canon TA100 and ikan ELE-WDGL Tripod Adapter Systems. Simply mount your Quick Release Plate to the bottom of the ELE-LBP component on the appropriate end, using four (4) Socket Head Countersink Screws.
An exploded view diagram illustrates the mounting process. The ikan ELE-WDGL and Canon TA100 quick release plates are shown above the ELE-LBP baseplate, with arrows indicating the connection points and the use of screws.
A photograph shows the ikan ELE-WDGL mounted to the ELE-LBP baseplate.
