Product Overview
This document provides user instructions for the NavTool Video Input Interface Push Button. This accessory allows for the integration and control of additional video sources, such as front cameras, into your vehicle's display system.
Origin: Designed and Manufactured in the USA.
Installation Recommendation
Notice: NavTool recommends having this installation performed by a certified technician. All product names, logos, brands, trademarks, and registered trademarks are the property of their respective owners.
Operating Instructions
Reverse Camera Usage
If only a reverse camera is installed, the push button is not required for its operation. The reverse camera will automatically display when the vehicle is placed in Reverse gear. It will automatically turn OFF and display the factory screen when the vehicle is placed in any other gear.
Front Camera (Video 2) Usage
If a front camera is installed and connected, you can use the push button to switch to its video feed. If no video source is connected, a "No Signal" message may appear.
- Turn ON Interface: Press the push button once. This will display Video 1 (typically the reverse camera or another primary source).
- Switch to Video 2: Press the push button once again to switch the display source to Video 2 (e.g., the front camera).
- Return to Factory Screen: Press and hold the push button for 2 seconds to return to the vehicle's original factory screen.
NAVTOOL INC
