NavTool Video Input Interface Push Button User Manual

Product Overview

This manual provides instructions for the NavTool Video Input Interface Push Button, designed and manufactured in the USA.

Notice: Installation by a certified technician is recommended. All product names, logos, brands, trademarks, and registered trademarks belong to their respective owners.

The interface includes a push button with attached red and black wires.

Operating Instructions

Important: If only a reverse camera is installed, the push button is not needed. The reverse camera automatically displays when the vehicle is in Reverse and turns off when in other gears, returning to the factory screen.

Using the Push Button for Video Sources

If no video source is connected, a "No Signal" message will appear.

1. Press the push button once to activate the interface and display Video 1.
2. Press the push button again to switch from Video 1 to Video 2 (e.g., a front camera).
3. Press and hold the push button for 2 seconds to return to the vehicle's factory screen.